Search Results

Search found 32277 results on 1292 pages for 'module development'.

Page 476/1292 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

• Efficient mapping layout in 2D side-scroller, and collisions between character and the world

  - by Jack

  I haven't touched Visual Studio for a couple months now, but I was playing a game from the '90s toady and had an epiphany: I was looking for something what i didn't need, and I wasn't using what I knew correctly. One of those realizations was collision, so let me tell you a bit about my project that I was working on. The project's graphics looks like Mario or Dangerous Dave, etc., you get the idea - old-school pixels. So anyway I remember trying to think of something else than AABB for character form, but I couldn't think of anything. Perhaps I could get a suggestion for this? Another thing is the world - I don't want it to be just linear world, I want mountains, etc.. My idea is to use triangles, and no idea yet what to do if I want just part of the cube, say 3/4 or 2/4 or whatever. Hard-coding such things seems inefficient. P.S. I am not looking at the precision level offered by Box2D. Actually I remember trying to implement it at first, but I failed as my understanding of C++ wasn't advanced enough, as it'll be mentioned below. P.P.S. I am programming in C++, and I haven't done it for a couple months now. I have no means of testing it either, as my PC is broken down, and this one can barely run games from late '90s, not to speak about a compiler or a program with inefficient resource management... I am also not an expert (obviously), I don't even know if I can consider myself an average programmer. In short, I am simply curious about my thoughts and my past experience when programming the game. I may come back to it when my PC is fixed, I'm already filling a note about these things.

  Read the article

• GUI device for throwing a ball

  - by Fredrik Johansson

  The hero has a ball, which shall be thrown with accuracy in a court on iPhone/iPad. The player is seen from above, in a 2D view. In game play, the player reach is between 1/15 and 1/6 of the height of the iPhone screen. The player will run, and try to outmaneuver his opponent, and then throw the ball at a specific location, which is guarded by the opponent (which is also shown on the screen). The player is controlled by a joystick, and that works ok, but how shall I control the stick? Maybe someone can propose a third control method? I've tried the following two approaches: Joystick: Hero has a reach of 1 meter, and this reach is marked with a semi-opaque circle around the player. The ball can be moved by a joystick. When the joystick is moved south, the ball is moved south within the reach circle. There is a direct coupling with the joystick and the position of the ball. I.e. when the joystick is moved max south, the ball is max south within the player reach. At each touch update the speed is calculated, and the Box2d ball position and ball speed are updated. NB, the ball will never be moved outside the reach as long as the player push the joystick. The ball is thrown by swiping the joystick to make the ball move, and then releasing the joystick. At release, the ball will get a smoothed speed of the joystick. Joystick Problem: The throwing accuracy gets bad, because the joystick can not be that big, and a small movement results in quite a large movement of the ball. If the user does not release before the end of the joystick maximum end point, the ball will stop, and when the user releases the joystick the speed of the ball will be zero. Bad... Touch pad A force is applied to the ball by a sweep on a touchpad. The ball is released when the sweep is ended, or when the ball is moved outside the player reach. As there is no one to one mapping between the swipe and the ball position, the precision can be improved. A large swipe can result in a small ball movement. Touch Pad Problem A touchpad is less intuitive. Users do not seem to know what to do with the touch pad. Some tap the touchpad, and then the ball just falls to the ground. As there is no one-to-one mapping, the ball can be moved outside the reach, and then it will just fall to the ground. It's a bit hard to control the ball, especially if the player also moves.

  Read the article

• Triangle Strips and Tangent Space Normal Mapping

  - by Koarl

  Short: Do triangle strips and Tangent Space Normal mapping go together? According to quite a lot of tutorials on bump mapping, it seems common practice to derive tangent space matrices in a vertex program and transform the light direction vector(s) to tangent space and then pass them on to a fragment program. However, if one was using triangle strips or index buffers, it is a given that the vertex buffer contains vertices that sit at border edges and would thus require more than one normal to derive tangent space matrices to interpolate between in fragment programs. Is there any reasonable way to not have duplicate vertices in your buffer and still use tangent space normal mapping? Which one do you think is better: Having normal and tangent encoded in the assets and just optimize the geometry handling to alleviate the cost of duplicate vertices or using triangle strips and computing normals/tangents completely at run time? Thinking about it, the more reasonable answer seems to be the first one, but why might my professor still be fussing about triangle strips when it seems so obvious?

  Read the article

• How to refactor and improve this XNA mouse input code?

  - by Andrew Price

  Currently I have something like this: public bool IsLeftMouseButtonDown() { return currentMouseState.LeftButton == ButtonState.Pressed && previousMouseSate.LeftButton == ButtonState.Pressed; } public bool IsLeftMouseButtonPressed() { return currentMouseState.LeftButton == ButtonState.Pressed && previousMouseSate.LeftButton == ButtonState.Released; } public bool IsLeftMouseButtonUp() { return currentMouseState.LeftButton == ButtonState.Released && previousMouseSate.LeftButton == ButtonState.Released; } public bool IsLeftMouseButtonReleased() { return currentMouseState.LeftButton == ButtonState.Released && previousMouseSate.LeftButton == ButtonState.Pressed; } This is fine. In fact, I kind of like it. However, I'd hate to have to repeat this same code five times (for right, middle, X1, X2). Is there any way to pass in the button I want to the function so I could have something like this? public bool IsMouseButtonDown(MouseButton button) { return currentMouseState.IsPressed(button) && previousMouseState.IsPressed(button); } public bool IsMouseButtonPressed(MouseButton button) { return currentMouseState.IsPressed(button) && !previousMouseState.IsPressed(button); } public bool IsMouseButtonUp(MouseButton button) { return !currentMouseState.IsPressed(button) && previousMouseState.IsPressed(button); } public bool IsMouseButtonReleased(MouseButton button) { return !currentMouseState.IsPressed(button) && previousMouseState.IsPressed(button); } I suppose I could create some custom enumeration and switch through it in each function, but I'd like to first see if there is a built-in solution or a better way.. Thanks!

  Read the article

• Strange rendering in XNA/Monogame

  - by Gerhman

  I am trying to render G-Code generated for a 3d-printer as the printed product by reading the file as line segments and the drawing cylinders with the diameter of the filament around the segment. I think I have managed to do this part right because the vertex I am sending to the graphics device appear to have been processed correctly. My problem I think lies somewhere in the rendering. What basically happens is that when I start rotating my model in the X or Y axis then it renders perfectly for half of the rotation but then for the other half it has this weird effect where you start seeing through the outer filament into some of the shapes inside. This effect is the strongest with X rotations though. Here is a picture of the part of the rotation that looks correct: And here is one that looks horrible: I am still quite new to XNA and/Monogame and 3d programming as a whole. I have no idea what could possibly be causing this and even less of an idea of what this type of behavior is called. I am guessing this has something to do with rendering so have added the code for that part: protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Black); basicEffect.World = world; basicEffect.View = view; basicEffect.Projection = projection; basicEffect.VertexColorEnabled = true; basicEffect.EnableDefaultLighting(); GraphicsDevice.SetVertexBuffer(vertexBuffer); RasterizerState rasterizerState = new RasterizerState(); rasterizerState.CullMode = CullMode.CullClockwiseFace; rasterizerState.ScissorTestEnable = true; GraphicsDevice.RasterizerState = rasterizerState; foreach (EffectPass pass in basicEffect.CurrentTechnique.Passes) { pass.Apply(); GraphicsDevice.DrawPrimitives(PrimitiveType.TriangleList, 0, vertexBuffer.VertexCount); } base.Draw(gameTime); } I don't know if it could be because I am shading something that does not really have a texture. I am using this custom vertex declaration I found on some tutorial that allows me to store a vertex with a position, color and normal: public struct VertexPositionColorNormal { public Vector3 Position; public Color Color; public Vector3 Normal; public readonly static VertexDeclaration VertexDeclaration = new VertexDeclaration ( new VertexElement(0, VertexElementFormat.Vector3, VertexElementUsage.Position, 0), new VertexElement(sizeof(float) * 3, VertexElementFormat.Color, VertexElementUsage.Color, 0), new VertexElement(sizeof(float) * 3 + 4, VertexElementFormat.Vector3, VertexElementUsage.Normal, 0) ); } If any of you have ever seen this type of thing please help. Also, if you think that the problem might lay somewhere else in my code then please just request what part you would like to see in the comments section.

  Read the article

• Gap in parallaxing background loop

  - by CinetiK

  The bug here is that my background kind of offset a bit itself from where it should draw and so I have this line. I have some troubles understanding why I get this bug when I set a speed that is different then 1,2,4,8,16,... In main class I set the speed depending on the player speed bgSpeed = -(int)playerMoveSpeed.X / 10; and here's my background class class ParallaxingBackground { Texture2D texture; Vector2[] positions; public int Speed { get; set;} public void Initialize(ContentManager content, String texturePath, int screenWidth, int speed) { texture = content.Load<Texture2D>(texturePath); this.Speed = speed; positions = new Vector2[screenWidth / texture.Width + 2]; for (int i = 0; i < positions.Length; i++) { positions[i] = new Vector2(i * texture.Width, 0); } } public void Update() { for (int i = 0; i < positions.Length; i++) { positions[i].X += Speed; if (Speed <= 0) { if (positions[i].X <= -texture.Width) { positions[i].X = texture.Width * (positions.Length - 1); } } else { if (positions[i].X >= texture.Width*(positions.Length - 1)) { positions[i].X = -texture.Width; } } } } public void Draw(SpriteBatch spriteBatch) { for (int i = 0; i < positions.Length; i++) { spriteBatch.Draw(texture, positions[i], Color.White); } } }

  Read the article

• Fast pixelshader 2D raytracing

  - by heishe

  I'd like to do a simple 2D shadow calculation algorithm by rendering my environment into a texture, and then use raytracing to determine what pixels of the texture are not visible to the point light (simply handed to the shader as a vec2 position) . A simple brute force algorithm per pixel would looks like this: line_segment = line segment between current pixel of texture and light source For each pixel in the texture: { if pixel is not just empty space && pixel is on line_segment output = black else output = normal color of the pixel } This is, of course, probably not the fastest way to do it. Question is: What are faster ways to do it or what are some optimizations that can be applied to this technique?

  Read the article

• New way of integrating Openfeint in Cocos2d-x 0.12.0

  - by Ef Es

  I am trying to implement OpenFeint for Android in my cocos2d-x project. My approach so far has been creating a button that calls a static java method in class Bridge using jnihelper functions (jnihelper only accepts statics). Bridge has one singleton attribute of type OFAndroid, that is the class dynamically calling the Openfeint Api methods, and every method in the bridge just forwards it to the OFAndroid object. What I am trying to do now is to initialize the openfeint libraries in the main java class that is the one calling the static C++ libraries. My problem right now is that the initializing function void com.openfeint.api.OpenFeint.initialize(Context ctx, OpenFeintSettings settings, OpenFeintDelegate delegate) is not accepting the context parameter that I am giving him, which is a "this" reference to the main class. Main class extends from Cocos2dxActivity but I don't have any other that extends from Application. Any suggestions on fixing it or how to improve the architecture? EDIT: I am trying a new solution. Make the bridge class into an Application child, is called from Main object, initializes OpenFeint when created and it can call the OpenFeint functions instead of needing an additional class. The problem is I still get the error. 03-30 14:39:22.661: E/AndroidRuntime(9029): Caused by: java.lang.NullPointerException 03-30 14:39:22.661: E/AndroidRuntime(9029): at android.content.ContextWrapper.getPackageManager(ContextWrapper.java:85) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.internal.OpenFeintInternal.validateManifest(OpenFeintInternal.java:885) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.internal.OpenFeintInternal.initializeWithoutLoggingIn(OpenFeintInternal.java:829) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.internal.OpenFeintInternal.initialize(OpenFeintInternal.java:852) 03-30 14:39:22.661: E/AndroidRuntime(9029): at com.openfeint.api.OpenFeint.initialize(OpenFeint.java:47) 03-30 14:39:22.661: E/AndroidRuntime(9029): at nurogames.fastfish.NuroFeint.onCreate(NuroFeint.java:23) 03-30 14:39:22.661: E/AndroidRuntime(9029): at nurogames.fastfish.FastFish.onCreate(FastFish.java:47) 03-30 14:39:22.661: E/AndroidRuntime(9029): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1069) 03-30 14:39:22.661: E/AndroidRuntime(9029): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2751)

  Read the article

• creating the nodes for path finding during run time - more like path making and more

  - by bigbadbabybear

  i'm making my 1st game. i'm using javascript as i currently want to learn to make games without needing to learn another language but this is more of a general game dev question its a 2d turn-based tile/grid game. you can check it here http://www.patinterotest.tk/ it creates a movable area when you hover a player and it implements the A* algo for moving the player. The Problem: i want to make the 'dynamic movable area creation' already implement a limited number of steps for a player. The Questions: what is a good way to do this? is there another algorithm to use for this? the A* algorithm needs a start and destination, with what i want to do i don't have a destination or should i just limit the iteration of the A* algo to the steps variable? hopefully you understand the problem & questions easily

  Read the article

• Transforming a primitive tetrahedron into a primitive icosahedron?

  - by Djentleman

  I've created a tetrahedron by creating a BoundingBox and building the faces of the tetrahedron within the bounding box as follows (see image as well): VertexPositionNormalTexture[] vertices = new VertexPositionNormalTexture[12]; BoundingBox box = new BoundingBox(new Vector3(-1f, 1f, 1f), new Vector3(1f, -1f, -1f)); vertices[0].Position = box.GetCorners()[0]; vertices[1].Position = box.GetCorners()[2]; vertices[2].Position = box.GetCorners()[7]; vertices[3].Position = box.GetCorners()[0]; vertices[4].Position = box.GetCorners()[5]; vertices[5].Position = box.GetCorners()[2]; vertices[6].Position = box.GetCorners()[5]; vertices[7].Position = box.GetCorners()[7]; vertices[8].Position = box.GetCorners()[2]; vertices[9].Position = box.GetCorners()[5]; vertices[10].Position = box.GetCorners()[0]; vertices[11].Position = box.GetCorners()[7]; What would I then have to do to transform this tetrahedron into an icosahedron? Similar to this image: I understand the concept but applying it is another thing entirely for me.

  Read the article

• Z Order in 2D with orthographic projection and texture atlas

  - by Carbon Crystal

  I am working with a 2D game in OpenGL ES and have a question about z-order together with a texture atlas. I am using an orthographic projection because I want pixel-perfect rendering of 2D sprites, however from what I can determine the draw order is really the only thing that will determine which textures (sprites) appear above or below their neighbors. That is, the "z-index" is a function of the order in which the textures are drawn as opposed to the z coordinate on the vertex array being drawn. So.. I have a texture atlas to save binding multiple textures for each draw call but this immediately creates a problem if there is more than one atlas in play. If I need to draw textures from more than one atlas (typically the case if I have too many sprites to fit in a single atlas of a reasonable size), then I can't maintain a "draw order" across atlases unless I want to bind/unbind the atlas textures more than once.. which kinda defeats the purpose. Does anyone have any clues as to what the best approach is here? Currently I'm running under an assumption that I will have to declare different fixed "depths" (e.g foreground, background etc) in my 2D scene and assume that the z-order for sprites at a given depth is the same. Then I can have as many atlases as I need at each depth and simply draw the depths in order (along with their associated atlases) I'd love to hear what other people are doing.

  Read the article

• 2D platformers: why make the physics dependent on the framerate?

  - by Archagon

  "Super Meat Boy" is a difficult platformer that recently came out for PC, requiring exceptional control and pixel-perfect jumping. The physics code in the game is dependent on the framerate, which is locked to 60fps; this means that if your computer can't run the game at full speed, the physics will go insane, causing (among other things) your character to run slower and fall through the ground. Furthermore, if vsync is off, the game runs extremely fast. Could those experienced with 2D game programming help explain why the game was coded this way? Wouldn't a physics loop running at a constant rate be a better solution? (Actually, I think a physics loop is used for parts of the game, since some of the entities continue to move normally regardless of the framerate. Your character, on the other hand, runs exactly [fps/60] as fast.) What bothers me about this implementation is the loss of abstraction between the game engine and the graphics rendering, which depends on system-specific things like the monitor, graphics card, and CPU. If, for whatever reason, your computer can't handle vsync, or can't run the game at exactly 60fps, it'll break spectacularly. Why should the rendering step in any way influence the physics calculations? (Most games nowadays would either slow down the game or skip frames.) On the other hand, I understand that old-school platformers on the NES and SNES depended on a fixed framerate for much of their control and physics. Why is this, and would it be possible to create a patformer in that vein without having the framerate dependency? Is there necessarily a loss of precision if you separate the graphics rendering from the rest of the engine? Thank you, and sorry if the question was confusing.

  Read the article

• 2D pathfinding - finding smooth paths

  - by Kooi Nam Ng

  I was trying to implement a simple pathfinding, but the outcome is less satisfactory than what I intended to achieve. The thing is units in games like Starcraft 2 move in all directions whereas units in my case only move in at most 8 directions (Warcraft 1 style) as these 8 directions direct to next available nodes (they move from a tile to next neighboring tile). What should I do in order to achieve the result as in Starcraft 2? Shrink the tile size? On the picture you can see a horizontal line of rock tiles being obstacles, and the found path marked as green tiles. The red line is the path I want to achieve.

  Read the article

• Robust line of sight test on the inside of a polygon with tolerance

  - by David Gouveia

  Foreword This is a followup to this question and the main problem I'm trying to solve. My current solution is an hack which involves inflating the polygon, and doing most calculations on the inflated polygon instead. My goal is to remove this step completely, and correctly solve the problem with calculations only. Problem Given a concave polygon and treating all of its edges as if they were walls in a level, determine whether two points A and B are in line of sight of each other, while accounting for some degree of floating point errors. I'm currently basing my solution on a series of line-segment interection tests. In other words: If any of the end points are outside the polygon, they are not in line of sight. If both end points are inside the polygon, and the line segment from A to B crosses any of the edges from the polygon, then they are not in line of sight. If both end points are inside the polygon, and the line segment from A to B does not cross any of the edges from the polygon, then they are in line of sight. But the problem is dealing correctly with all the edge cases. In particular, it must be able to deal with all the situations depicted below, where red lines are examples that should be rejected, and green lines are examples that should be accepted. I probably missed a few other situations, such as when the line segment from A to B is colinear with an edge, but one of the end points is outside the polygon. One point of particular interest is the difference between 1 and 9. In both cases, both end points are vertices of the polygon, and there are no edges being intersected, but 1 should be rejected while 9 should be accepted. How to distinguish these two? I could check some middle point within the segment to see if it falls inside or not, but it's easy to come up with situations in which it would fail. Point 7 was also pretty tricky and I had to to treat it as a special case, which checks if two points are adjacent vertices of the polygon directly. But there are also other chances of line segments being col linear with the edges of the polygon, and I'm still not entirely sure how I should handle those cases. Is there any well known solution to this problem?

  Read the article

• Odd Android touch event problem

  - by user22241

  Overview When testing my game I came across a bizarre problem with my touch controls. Note this isn't related to multi-touch as I completely removed my ACTION_POINTER_UP and ACTION_POINTER_DOWN along with my ACTION_MOVE code. So I'm simply working with ACTION_UP and ACTION_DOWN now and still get the problem. The problem I have a left and right button on the left of the screen and a jump button on the right. Everything works as it should but if I touch a large area of my hand (the fleshy part at the base of the thumb for instance) onto the screen, then release it and then press one of my arrows, the sprite moves in that direction for a few seconds, and then ACTION_UP is mysteriously triggered. The sprite stops and then if I release my finger and re-apply it to an arrow, the same thing happens. This goes on and on and eventually (randomly??) stops and everything work OK again. Test device & OS Google Nexus 10 Tablet running Jellybean 4.2.2 Code //Action upon which to switch actionMask = event.getActionMasked(); //Pointer Index of the currently touching pointer pointerIndex = event.getActionIndex(); //Number of pointers (for multi-touch) pointerCount = event.getPointerCount(); //ID of the pointer currently being processed (Multitouch) pointerID = event.getPointerId(pointerIndex); switch (actionMask){ //Primary pointer down case MotionEvent.ACTION_DOWN: { //if pressing left button then set moving left if (isLeftPressed(event.getX(), event.getY())){ renderer.setSpriteLeft(); } //if pressing right button then set moving right else if (isRightPressed(event.getX(), event.getY())){ renderer.setSpriteRight(); } //if pressing jump button then set sprite jumping else if (isJumpPressed(event.getX(),event.getY())){ renderer.setSpriteState('j', true); } break; }//End of case //Primary pointer up case MotionEvent.ACTION_UP:{ //When finger leaves the screen, stop sprite's horizontal movement renderer.setSpriteStopped(); break; }

  Read the article

• Camera closes in on the fixed point

  - by V1ncam

  I've been trying to create a camera that is controlled by the mouse and rotates around a fixed point (read: (0,0,0)), both vertical and horizontal. This is what I've come up with: camera.Eye = Vector3.Transform(camera.Eye, Matrix.CreateRotationY(camRotYFloat)); Vector3 customAxis = new Vector3(-camera.Eye.Z, 0, camera.Eye.X); camera.Eye = Vector3.Transform(camera.Eye, Matrix.CreateFromAxisAngle(customAxis, camRotXFloat * 0.0001f)); This works quit well, except from the fact that when I 'use' the second transformation (go up and down with the mouse) the camera not only goes up and down, it also closes in on the point. It zooms in. How do I prevent this? Thanks in advance.

  Read the article

• GLSL Shader Effects: How to do motion blur, etc?

  - by DevilWithin

  I am not sure how right it is to ask this question, but still here it goes. I have a full 2D environment, with sprites going around as landscape, characters, etc And to make it more state-of-art looking, i want to implement a motion blur effect, similar to modern FPS's (i.e. crysis) blur when moving fast the camera. In a sidescroller, the desired effect is having this slight blur appearing to give the idea of fast movement, when the camera is moving. If anyone could give me some tips on doing this, im assuming in a pixel shader, i'd be grate. Also, if anyone has other good tips on cool pixel shader effects for 2D games it would be awesome, like some stylizing post fx, such as previous Prince of Persia illustrative style. Thanks

  Read the article

• Strange javascript error when using Kongregates API

  - by Phil

  In the hopes of finding a fellow unity3d developer also aiming for the Kongregate contest.. I've implemented the Kongregate API and can see that the game receives a call with my username and presents it ingame. I'm using Application.ExternalCall("kongregate.stats.submit",type,amount); where type is a string "Best Score" and amount is an int (1000 or something). This is the error I'm getting: You are trying to call recursively into the Flash Player which is not allowed. In most cases the JavaScript setTimeout function, can be used as a workaround. callASFunction:function(a,b){if(FABrid...tion, can be used as a workaround."); I'm wondering, has anyone else had this error or am I somehow doing something stupid? Thanks!

  Read the article

• How to show a minimap in a 3d world

  - by Bubblewrap

  Got a really typical use-case here. I have large map made up of hexagons and at any given time only a small section of the map is visible. To provide an overview of the complete map, i want to show a small 2d representation of the map in a corner of the screen. What is the recommended approach for this in libgdx? Keep in mind the minimap must be updated when the currently visible section changes and when the map is updated. I've found SpriteBatch, but the warning label on it made me think twice: A SpriteBatch is a pretty heavy object so you should only ever have one in your program. I'm not sure i'm supposed to use the one SpriteBatch that i can have on the minimap, and i'm also not sure how to interpret "heavy" in this context. Another thing to possibly keep in mind is that the minimap will probably be part of a larger UI...is there any way to integrate these two?

  Read the article

• Animating DOM elements vs refreshing a single Canvas

  - by mgibsonbr

  A few years ago, when the HTML Canvas element was still kinda fresh, I wrote a small game in a rather "unusual" way: each game element had its own canvas, and frequently animated elements even had multiple canvases, one for each animation sprite. This way, the translation would be done by manipulating the DOM position of the canvases, while the sprite animation would consist of altering the visibility of the already drawn canvases. (z-indexes, of course, were the tricky part) It worked like a charm: even in IE6 with excanvas it showed a decent performance, and everything was rather consistent between browsers, including some smartphones. Now I'm thinking in writing a larger game engine in the same fashion, so I'm wondering whether it would be a good idea to do so in the current context (with all the advances in browsers and so on). I know I'm trading memory for time, so this needs to be customizable (even at runtime) for each machine the game will be running. But I believe using separate canvases would also help to avoid the game "freezing" on CPU spikes, since the translation would still happen even if the redraws lag for a while. Besides, the browsers' rendering engines are already optimized in may ways, so I'm guessing this scheme would also reduce the load on the CPU (in contrast to doing everything in JavaScript - specially the less optimized ones). It looks good in my head, but I'd like to hear the opinion of more experienced people before proceeding further. Is there any known drawback of doing this? I'm particulartly unexperienced in dealing with the GPU, so I wonder whether this "trick" would nullify any benefit of using a single, big canvas. Or maybe on modern devices it's overkill (though I'm skeptic about the claims that canvas+js - especially WebGL - will ever be a good alternative to native code). Any thoughts?

  Read the article

• Using unordered_multimap as entity and component storage

  - by natebot13

  The Setup I've made a few games (more like animations) using the Object Oriented method with base classes for objects that extend them, and objects that extend those, and found I couldn't wrap my head around expanding that system to larger game ideas. So I did some research and discovered the Entity-Component system of designing games. I really like the idea, and thoroughly understood the usefulness of it after reading Byte54's perfect answer here: Role of systems in entity systems architecture. With that said, I have decided to create my current game idea using the described Entity-Component system. Having basic knowledge of C++, and SFML, I would like to implement the backbone of this entity component system using an unordered_multimap without classes for the entities themselves. Here's the idea: An unordered_mulitmap stores entity IDs as the lookup term, while the value is an inherited Component object. Examlpe: ____________________________ |ID |Component | ---------------------------- |0 |Movable | |0 |Accelable | |0 |Renderable | |1 |Movable | |1 |Renderable | |2 |Renderable | ---------------------------- So, according to this map of objects, the entity with ID 0 has three components: Movable, Accelable, and Renderable. These component objects store the entity specific data, such as the location, the acceleration, and render flags. The entity is simply and ID, with the components attached to that ID describing its attributes. Problem I want to store the component objects within the map, allowing the map have full ownership of the components. The problem I'm having, is I don't quite understand enough about pointers, shared pointers, and references in order to get that set up. How can I go about initializing these components, with their various member variables, within the unordered_multimap? Can the base component class take on the member variables of its child classes, when defining the map as unordered_multimap<int, component>? Requirements I need a system to be able to grab an entity, with all of its' attached components, and access members from the components in order to do the necessary calculations and reassignments for position, velocity, etc. Need a clarification? Post a comment with your concerns and I will gladly edit or comment back! Thanks in advance! natebot13

  Read the article

• How do engines avoid "Phase Lock" (multiple objects in same location) in a Physics Engine?

  - by C0M37

  Let me explain Phase Lock first: When two objects of non zero mass occupy the same space but have zero energy (no velocity). Do they bump forever with zero velocity resolution vectors or do they just stay locked together until an outside force interacts? In my home brewed engine, I realized that if I loaded a character into a tree and moved them, they would signal a collision and hop back to their original spot. I suppose I could fix this by implementing impulses in the event of a collision instead of just jumping back to the last spot I was in (my implementation kind of sucks). But while I make my engine more robust, I'm just curious on how most other physics engines handle this case. Do objects that start in the same spot with no movement speed just shoot out from each other in a random direction? Or do they sit there until something happens? Which option is generally the best approach?

  Read the article

• Joystick example problem for android 2D

  - by iQue

  I've searched all over the web for an answer to this, and there are simular topics but nothing works for me, and I have no Idea why. I just want to move my sprite using a joystick, since I'm useless at math when it comes to angles etc I used an example, Ill post the code here: public float initx = 50; //og 425; public float inity = 300; //og 267; public Point _touchingPoint = new Point(50, 300); //og(425, 267); public Point _pointerPosition = new Point(100, 170); private Boolean _dragging = false; private MotionEvent lastEvent; @Override public boolean onTouchEvent(MotionEvent event) { if (event == null && lastEvent == null) { return _dragging; } else if (event == null && lastEvent != null) { event = lastEvent; } else { lastEvent = event; } // drag drop if (event.getAction() == MotionEvent.ACTION_DOWN) { _dragging = true; } else if (event.getAction() == MotionEvent.ACTION_UP) { _dragging = false; } if (_dragging) { // get the pos _touchingPoint.x = (int) event.getX(); _touchingPoint.y = (int) event.getY(); // bound to a box if (_touchingPoint.x < 25) { _touchingPoint.x = 25; //og 400 } if (_touchingPoint.x > 75) { _touchingPoint.x = 75; //og 450 } if (_touchingPoint.y < 275) { _touchingPoint.y = 275; //og 240 } if (_touchingPoint.y > 325) { _touchingPoint.y = 325; //og 290 } // get the angle double angle = Math.atan2(_touchingPoint.y - inity, _touchingPoint.x - initx) / (Math.PI / 180); // Move the beetle in proportion to how far // the joystick is dragged from its center _pointerPosition.y += Math.sin(angle * (Math.PI / 180)) * (_touchingPoint.x / 70); _pointerPosition.x += Math.cos(angle * (Math.PI / 180)) * (_touchingPoint.x / 70); // stop the sprite from goin thru if (_pointerPosition.x + happy.getWidth() >= getWidth()) { _pointerPosition.x = getWidth() - happy.getWidth(); } if (_pointerPosition.x < 0) { _pointerPosition.x = 0; } if (_pointerPosition.y + happy.getHeight() >= getHeight()) { _pointerPosition.y = getHeight() - happy.getHeight(); } if (_pointerPosition.y < 0) { _pointerPosition.y = 0; } } public void render(Canvas canvas) { canvas.drawColor(Color.BLUE); canvas.drawBitmap(joystick.get_joystickBg(), initx-45, inity-45, null); canvas.drawBitmap(happy, _pointerPosition.x, _pointerPosition.y, null); canvas.drawBitmap(joystick.get_joystick(), _touchingPoint.x - 26, _touchingPoint.y - 26, null); } public void update() { this.onTouchEvent(null); } og= original position. as you can see Im trying to move the joystick, but when I do it stops working correctly, I mean it still works like a joystick but the sprite dosnt move accordingly, if I for example push the joystick down, the sprite moves up, and if I push it up it moves left. can anyone PLEASE help me, I've been stuck here for sooo long and its really frustrating.

  Read the article

• The technology behind 22can's curiosity

  - by Cameron Scully

  I don't have alot of experience with mobile apps and I definitely don't know much about MMO's but I was wondering what the basic architecture of a game like that would be (understandably some don't consider it a game, but it must use some game theory and implementation). Mainly, how are they able to send/recieve real time feed back of the cube being chipped away by thousands of players on their mobile devices? How is data of the cube's millions of pieces stored and accessed so quickly? Thanks

  Read the article

• XNA windows phone release black textures

  - by Lukasz Kajstura

  i just made a 3d game in XNA for windows phone 7. I build it in release mode on visual studio 2010 and suddenly when I run game there is no textures on models - 2 models are black and one is transparent. Models are in .X format exported from 3dsmax and have textures in .jpg also added to game content. I set build action to none and all worked fine in debug mode. When I change to release mode - black textures. When I set build action to compile it gives me warning: Asset was built 2 times with different settings: using TextureImporter and TextureProcessor using TextureImporter and TextureProcessor, referenced by... and still no textures. What can I do?

  Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >