Search Results

Search found 2442 results on 98 pages for 'novice man'.

Page 50/98 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Cannot boot into system after deleting partition

    - by Clayton
    Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

    Read the article

  • Just re-installed Ubuntu 14.04, unstable wireless connection, Lenovo ThinkPad X200

    - by Mark Lawtie
    I re-installed Ubuntu 14.04 as I was having problems with unstable wireless connection... Following re-installation I am having the same problem: connection randomly dropping out, then reconnecting... all my other devices are running well when connected I am a bit of a computer novice so any help would be greatly appreciated... I am running Lenovo ThinkPad X200 laptop... Thanks! mark@mark-ThinkPad-X200:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection mark@mark-ThinkPad-X200:~$ mark@mark-ThinkPad-X200:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 026: ID 0a5c:2145 Broadcom Corp. BCM2045B (BDC-2.1) [Bluetooth Controller] Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mark@mark-ThinkPad-X200:~$

    Read the article

  • Canonicalization issue regarding academic URL vs. blog URL

    - by user5395
    I'm sorry if what I am about to write is long-winded. I only wish to be clear. I am an academic in the scientific community. I maintain a web site for my research, teaching, and other professional activities. Until recently, the content for this site was hosted in a directory on my university department's own server. The address is of the typical form (universityname).edu/~(myusername) I decided that I wanted to use WordPress in order to host and manage my page. So I set up a WordPress.com blog and then replaced the index.html file in (universityname).edu/~(myusername) with a new one consisting of a single frame, containing the WordPress.com blog. Now when a user visits (universityname).edu/~(myusername), he or she sees the blog instead. This has been pretty nice because, even when the user clicks on links between pages or posts in the blog, the only thing showing up in the address bar of the browser is www.(universityname).edu/~(myusername), because the blog is constrained to a frame. However, the effect of this change on the search side of things has not been so kind to me. Before, when someone searched for my name in Google, the first result was always (universityname).edu/~(myusername). This is the most desirable outcome, for professional reasons. (Having my academic URL come up first suggests that I am an accredited professional, and not just some crank with a blog!) But now, Google seems to have canonicalized my web presence under the blog's WordPress.com address. It has completely forgotten about my academic URL and considers the WordPress.com address to be the best address representing me on the web. Unfortunately, WordPress.com doesn't support the canonical tag, so I can't tell the blog to advertise itself as my academic URL in the header. (It doesn't seem to help at all that I have used the WordPress.com dashboard to turn on no-indexing of the blog.) One obvious solution would be to use the departmental server to host my content again, and use a local installation of the WordPress platform. For reasons beyond my control, the platform will not be deployed on the departmental server at this time. Another solution would be to use shared hosting with WordPress.org support, because the WordPress.org platform does support the canonical tag (albeit via a plug-in). But this seems to usually require purchasing a domain name and other fees, and there is no guarantee that Google will listen to the canonical tag (it might use whatever domain name I end up with instead). Is there a way I can more cleverly integrate the WordPress.com blog into a page hosted on my department's server? Is there some PHP code I can write to retrieve the blog's contents in a way that Google won't treat as a link / "perceive" the blog? Please note: I am a PHP novice at best. I just feel there should be a simpler solution to all this, within the constraints of what I have described above. Thanks!

    Read the article

  • ZFS pool broken after upgrading to 14.04 LTS

    - by cruiserparts
    Well, I have been putting off upgrading to 14.04 for fear that I would break something. Actually for fear that it would break zfs (or I would break it). I am bascially slightly better than novice at linux. Spent the last couple of hours trying to get the pool back. Now I am at the stage where I don't think I have a complete failure, but I am worried that I may break it. So if could help me not break it, and recover it, I would be thankful. My zfs is file storage and not boot. It was working fine for a year and was working perfectly before the upgrade (scrub and everything was fine). I was confident that the upgrade would work (or at least I could fix it) because I had upgraded once in the past, the pool went missing, but I was able to get it back. I have reinstalled zfs, zfs utilities, and some dependencies (after searching this forum) I think what happened is 14.04 deleted some config file, or specified disk names differntly, but I could be wrong. When I set the pool up originally, I was using specific device Ids as I recall (because I did not want to break things if they got reassigned at boot) So see if this helps. I can confirm that old mountpoint folders are there but empty. no talloc stackframe at ../source3/param/loadparm.c:4864, leaking memory pool: naspool1 state: UNAVAIL status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM naspool1 UNAVAIL 0 0 0 insufficient replicas raidz1-0 UNAVAIL 0 0 0 insufficient replicas scsi-SATA_WDC_WD1001FALS-_WD-WMATV0990825 UNAVAIL 0 0 0 scsi-SATA_WDC_WD1001FALS-_WD-WMATV2995365 UNAVAIL 0 0 0 scsi-SATA_WDC_WD10EARS-00_WD-WMAV51894349 UNAVAIL 0 0 0 ___@ourserver:~$ sudo zpool import naspool1 cannot import 'naspool1': a pool with that name is already created/imported, and no additional pools with that name were found ___@ourserver:~$ sudo zfs list no datasets available What other output can I post to help? I'm thinking the update deleted some zfs config files. It seems like the pool exists and certainly 3 perfectly working disks did not fail at once. I am worried that I may break something without a little bit of guideance. Thanks.

    Read the article

  • ANTS Memory Profiler 7.0

    - by Sam Abraham
    In the next few lines, I would like to briefly review ANTS Memory Profiler 7.0.  I was honored to be extended the opportunity to review this valuable tool as part of the GeeksWithBlogs influencers Program, a quarterly award providing its recipients access to valuable tools and enabling them with an opportunity to provide a brief write-up reviewing the complimentary tools they receive.   Typical Usage   ANTS Memory Profiler 7.0 is very intuitive and easy to use for any user be it novice or expert. A simple yet comprehensive menu screen enables the selection of the appropriate program type to profile as well as the executable or site for this program.   A typical use case starts with establishing a baseline memory snapshot, which tells us the initial memory cost used by the program under normal or low activity conditions. We would then take a second snapshot after the program has performed an activity which we want to investigate for memory leaks. We can then compare the initial baseline snapshot against the snapshot when the program has completed processing the activity in question to study anomalies in memory that did not get freed-up after the program has completed its performed function. The following are some screenshots outlining the selection of the program to profile (an executable for this demonstration’s purposes).   Figure 1 - Getting Started   Figure 2 - Selecting an Application to Profile     Features and Options   Right after the second snapshot is generated, Memory Profiler gives us immediate access to information on memory fragmentation, size differences between snapshots, unmanaged memory allocation and statistics on the largest classes taking up un-freed memory space.   We would also have the option to itemize objects held in memory grouped by object types within which we can study the instances allocated of each type. Filtering options enable us to quickly narrow object instances we are interested in.   Figure 3 - Easily accessible Execution Memory Information   Figure 4 - Class List   Figure 5 - Instance List   Figure 6-  Retention Graph for a Particular Instance   Conclusion I greatly enjoyed the opportunity to evaluate ANTS Memory Profiler 7.0. The tool's intuitive User Interface design and easily accessible menu options enabled me to quickly identify problem areas where memory was left unfreed in my code.     Tutorials and References  FInd out more About ANTS Memory Profiler 7.0 http://www.red-gate.com/supportcenter/Product?p=ANTS Memory Profiler   Checkout what other reviewers of this valuable tool have already shared: http://geekswithblogs.net/BlackRabbitCoder/archive/2011/03/10/ants-memory-profiler-7.0.aspx http://geekswithblogs.net/mikebmcl/archive/2011/02/28/ants-memory-profiler-7.0-review.aspx

    Read the article

  • SQL SERVER – Fix: Error: 147 An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference

    - by pinaldave
    Everybody was beginner once and I always like to get involved in the questions from beginners. There is a big difference between the question from beginner and question from advanced user. I have noticed that if an advanced user gets an error, they usually need just a small hint to resolve the problem. However, when a beginner gets error he sometimes sits on the error for a long time as he/she has no idea about how to solve the problem as well have no idea regarding what is the capability of the product. I recently received a very novice level question. When I received the problem I quickly see how the user was stuck. When I replied him with the solution, he wrote a long email explaining how he was not able to solve the problem. He thanked multiple times in the email. This whole thing inspired me to write this quick blog post. I have modified the user’s question to match the code with AdventureWorks as well simplified so it contains the core content which I wanted to discuss. Problem Statement: Find all the details of SalesOrderHeaders for the latest ShipDate. He comes up with following T-SQL Query: SELECT * FROM [Sales].[SalesOrderHeader] WHERE ShipDate = MAX(ShipDate) GO When he executed above script it gave him following error: Msg 147, Level 15, State 1, Line 3 An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. He was not able to resolve this problem, even though the solution was given in the query description itself. Due to lack of experience he came up with another version of above query based on the error message. SELECT * FROM [Sales].[SalesOrderHeader] HAVING ShipDate = MAX(ShipDate) GO When he ran above query it produced another error. Msg 8121, Level 16, State 1, Line 3 Column ‘Sales.SalesOrderHeader.ShipDate’ is invalid in the HAVING clause because it is not contained in either an aggregate function or the GROUP BY clause. What he wanted actually was the SalesOrderHeader all the Sales shipped on the last day. Based on the problem statement what the right solution is as following, which does not generate error. SELECT * FROM [Sales].[SalesOrderHeader] WHERE ShipDate = (SELECT MAX(ShipDate) FROM [Sales].[SalesOrderHeader]) Well, that’s it! Very simple. With SQL Server there are always multiple solution to a single problem. Is there any other solution available to the problem stated? Please share in the comment. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How to run software, that is not offered though package managers, that requires ia32-libs

    - by Onno
    I'm trying to install the Arma 2 OA dedicated server on a Virtualbox VM so I can test my own missions in a sandbox environment in a way that lets me offload them to another computer in my network. (The other computer is running the VM, but it's a windows machine, and I didn't want to hassle with its installation) It needs at least 2, and preferably 4GB of ram, so I thought I would install the AMD64 version of ubuntu 13.10 to get this going. 'How do you run a 32-bit program on a 64-bit version of Ubuntu?' already explained how to install 32bit software though apt-get and/or dpkg, but that doesn't apply in this case. The server is offered as a compressed download on the site of BI Studio, the developer of the Arma games. Its installation instructions are obviously slightly out of date with the current state of the art. (probably because the state of the art has been updated quite recently :) ) It states that I have to install ia32-libs, which has now apparently been deprecated. Now I have to find out how to get the right packages installed to make sure that it will run. My experience level is like novice-intermediate when it comes to these issues. I've installed a lot of packages though apt-get; I've solved dependency issues in the past; I haven't installed much software without using package managers. I can handle myself with basic administrative work like editing conf files and such. I have just gone ahead and tried to install it without installing ia32-libs through apt-get but to install gcc to get the libs after all. My reasoning being that gcc will include the files for backward compatibility coding and on linux all libs are (as far as I can tell) installed at a system level in /libs . So far it seems to start up. (I can connect with the game server trough my in-game network browser, so it's communicating) I'm not sure if there's any dependency checking going on when running the game server program, so I'm left with a couple of questions: Does 13.10 catch any calls to ia32libs libraries and translate the calls to the right code on amd64? If it runs, does that mean that all required libraries have been loaded correctly, or is there a change of it crashing later on when a library that was needed is missing after all? Is it necessary to do a workaround such as installing gcc? How do I find out what libraries I might need to run this software? (or any other piece of 32-bit software that isn't offered through a package manager)

    Read the article

  • RTS Game Style Application [closed]

    - by Daniel Wynand van Wyk
    My question may seem somewhat odd, but I hope that my specifications will clarify EXACTLY what it is that I am after. I need some help choosing the right tooling for a particular endeavour. My background is in desktop application development and large back-end systems. I have worked primarily on the Microsoft stack using C# and the .Net framework. My goal is to develop a 2D, RTS style, interactive office simulation. The simulation will model various office spaces, office equipment, employees and their interactions with one another. The idea is to abstract the concept of an office completely. Under the hood the application will do many things that are nothing like a game. This includes P2P networking, VPN tunnelling, streaming video, instant messaging, document collaboration, remote screen sharing, file-sharing, virus scanning, VOIP, document scanning, faxing, emailing, distributed computing, content management and much more! A somewhat similar thing has been attempted by IBM, where they created a virtual office in second life. If their attempt was a game, the game-play would be notably horrible, to say the least! The users/players will drive and control my application through the various objects modelled in the simulation. A single application capable of performing all of these various tasks would be a nightmare to navigate for even the most expert user. Using the concept of a game, I can easily separate functionality by assigning them to objects that relate 1-1 with their real world counter-parts. This can greatly simplify computing for novice users, with many added benefits in terms of visibility, transparency of process and centralized configuration. My hope is to make complex computing tasks accessible to all kinds of users and to greatly reduce the cognitive load associated with using the many different utilities and applications inside office settings. The complexity is therefore limited to the complexity of the space in which you find yourself. I want the application to target as many platforms as possible and run on computers that have no accelerated graphics capabilities. The simulation won't contain any of the fancy eye-candy you find in modern games, to the contrary, my "game" will purposefully be clean and simple. The closest thing I could imagine would be an old game like "Theme Hospital" or the first instalment of "The Sims". All the content will be pre-created and not user-generated like Second Life. New functionality will be added via a plugin system. Given my background and nature of my "game", I would like to spend most of my time writing code that does not have to do with the simulated office, as the "game" is really just a glorified application menu. I have done much reading about existing engines, frameworks and tools. I need the help of an experienced game developer who has tried and tested various products over the years who can guide me in the right direction given my very particular needs. I would appreciate any help I can get!

    Read the article

  • PHP Fingerprinting CMS Versions by their meta tags [migrated]

    - by Mud
    Hey guys I'm having some issues with the speed of my script. I'm a novice I know so getting past that - what suggestions would you have to speed up my script? I was originally just reading in the index.php and then searching the <head> of the page for an array of strings. Then I read about the get_meta_tags and went that way. Then I had issues with some sites having 300 redirects in place so I used curl to check the URL existed and to speed up things but it's still taking 5 minutes or so to execute. <?php function url_exist($url){ $c=curl_init(); curl_setopt($c,CURLOPT_URL,$url); curl_setopt($c,CURLOPT_HEADER,1); curl_setopt($c,CURLOPT_NOBODY,1); curl_setopt($c,CURLOPT_RETURNTRANSFER,1); curl_setopt($c,CURLOPT_FRESH_CONNECT,1); if(!curl_exec($c)){ return false; }else{ return true; } curl_close($c); } function checkVersion($url){ $tags = get_meta_tags($url); if (is_array($tags) && array_key_exists('generator', $tags)) { $v = "<span style='background-color:#7BF55D;color:#A3A0A0'>".$tags['generator']."</span"; }else{ $v="<span style='background-color:#F55D67;color:#A3A0A0'>Metatag not found!</span>"; } return $v; } $row = 1; echo "<table>"; if (($handle = fopen("url.csv", "r")) !== FALSE) { while (($data = fgetcsv($handle, 1000, ",")) !== FALSE) { $num = count($data); $row++; for ($c=0; $c < $num; $c++) { if(url_exist($data[$c])){ echo "<tr><td>".$data[$c]."</td><td>".checkVersion($data[$c])."</td></tr>"; sleep(2); }else{ echo "<tr><td>".$data[$c]."</td><td><td><span style='background-color:#F55D5D;color:#A3A0A0'>URL not valid!<span></td></tr>"; } } } fclose($handle); } echo "</table>"; ?>

    Read the article

  • Should we persist with an employee still writing bad code after many years?

    - by user94986
    I've been assigned the task of managing developers for a well-established company. They have a single developer who specialises in all their C++ coding (since forever), but the quality of the work is abysmal. Code reviews and testing have revealed many problems, one of the worst being memory leaks. The developer has never tested his code for leaks, and I discovered that the applications could leak many MBs with only a minute of use. User's were reporting huge slowdowns, and his take was, "it's nothing to do with me - if they quit and restart, it's all good again." I've given him tools to detect and trace the leaks, and sat down with him for many hours to demonstrate how the tools are used, where the problems occur, and what to do to fix them. We're 6 months down the track, and I assigned him to write a new module. I reviewed it before it was integrated into our larger code base, and was dismayed to discover the same bad coding as before. The part that I find incomprehensible is that some of the coding is worse than amateurish. For example, he wanted a class (Foo) that could populate an object of another class (Bar). He decided that Foo would hold a reference to Bar, e.g.: class Foo { public: Foo(Bar& bar) : m_bar(bar) {} private: Bar& m_bar; }; But (for other reasons) he also needed a default constructor for Foo and, rather than question his initial design, he wrote this gem: Foo::Foo() : m_bar(*(new Bar)) {} So every time the default constructor is called, a Bar is leaked. To make matters worse, Foo allocates memory from the heap for 2 other objects, but he didn't write a destructor or copy constructor. So every allocation of Foo actually leaks 3 different objects, and you can imagine what happened when a Foo was copied. And - it only gets better - he repeated the same pattern on three other classes, so it isn't a one-off slip. The whole concept is wrong on so many levels. I would feel more understanding if this came from a total novice. But this guy has been doing this for many years and has had very focussed training and advice over the past few months. I realise he has been working without mentoring or peer reviews most of that time, but I'm beginning to feel he can't change. So my question is, would you persist with someone who is writing such obviously bad code?

    Read the article

  • reverse proxy on PFsense, squid or otherwise

    - by Mustafa Ismail Mustafa
    I've been trying to get this to work for days now and its not working. After bashing my head against the desk enough times, I've decided to man up and ask. I'm desperately trying to set up a reverse proxy on the pfsense box itself. One because its a pretty powerful box and its not being utilized to the maximum at all and two because I don't have any spare machines to setup squid (or any other reverse proxy [capable]) server on. So, on pfsense, everytime I set up rules (on ServicesProxy ServerGeneral) as so: acl surveillance dstdomain surveillance.myweb.local; acl camera dstdomain camera.myweb.local; http_access allow surveillance AND camera (ad nauseum) when I check the services, squid stops and refuses to restart until I remove them pesky acls that are supposed to make my life easier! What am I doing wrong? How can I get it to work? Is there another way/package I can use? Thanks

    Read the article

  • Installing MySQL on Ubuntu 12 fails on a clean installation

    - by Keenora Fluffball
    I do have the problem, that even if I uninstall mysql completely and do a restart, it still doesn't install mysql. This is the error I get: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Die folgenden zusätzlichen Pakete werden installiert: libdbd-mysql-perl libmysqlclient18 mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Vorgeschlagene Pakete: tinyca mailx Die folgenden NEUEN Pakete werden installiert: libdbd-mysql-perl libmysqlclient18 mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 aktualisiert, 8 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 26,2 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 94,2 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren [J/n]? J Hole:1 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-common all 5.5.28-0ubuntu0.12.10.1 [13,4 kB] Hole:2 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main libmysqlclient18 amd64 5.5.28-0ubuntu0.12.10.1 [949 kB] Hole:3 http://de.archive.ubuntu.com/ubuntu/ quantal/main libdbd-mysql-perl amd64 4.021-1 [97,7 kB] Hole:4 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-client-core-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [1.941 kB] Hole:5 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-client-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [8.332 kB] Hole:6 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server-core-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [5.983 kB] Hole:7 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [8.842 kB] Hole:8 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server all 5.5.28-0ubuntu0.12.10.1 [11,6 kB] Es wurden 26,2 MB in 1 min 5 s geholt (399 kB/s) Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket mysql-common wird gewählt. (Lese Datenbank ... 68073 Dateien und Verzeichnisse sind derzeit installiert.) Entpacken von mysql-common (aus .../mysql-common_5.5.28-0ubuntu0.12.10.1_all.deb) ... Vormals nicht ausgewähltes Paket libmysqlclient18:amd64 wird gewählt. Entpacken von libmysqlclient18:amd64 (aus .../libmysqlclient18_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket libdbd-mysql-perl wird gewählt. Entpacken von libdbd-mysql-perl (aus .../libdbd-mysql-perl_4.021-1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-client-core-5.5 wird gewählt. Entpacken von mysql-client-core-5.5 (aus .../mysql-client-core-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-client-5.5 wird gewählt. Entpacken von mysql-client-5.5 (aus .../mysql-client-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-server-core-5.5 wird gewählt. Entpacken von mysql-server-core-5.5 (aus .../mysql-server-core-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Trigger für man-db werden verarbeitet ... mysql-common (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... Vormals nicht ausgewähltes Paket mysql-server-5.5 wird gewählt. (Lese Datenbank ... 68251 Dateien und Verzeichnisse sind derzeit installiert.) Entpacken von mysql-server-5.5 (aus .../mysql-server-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-server wird gewählt. Entpacken von mysql-server (aus .../mysql-server_5.5.28-0ubuntu0.12.10.1_all.deb) ... Trigger für man-db werden verarbeitet ... Trigger für ureadahead werden verarbeitet ... libmysqlclient18:amd64 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... libdbd-mysql-perl (4.021-1) wird eingerichtet ... mysql-client-core-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-client-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-server-core-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-server-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/usr.sbin.mysqld at line 9: >>abstractions/mysql<< konnte nicht ge?ffnet werden start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: Fehler beim Bearbeiten von mysql-server-5.5 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück dpkg: Abhängigkeitsprobleme verhindern Konfiguration von mysql-server: mysql-server hängt ab von mysql-server-5.5; aber: Paket mysql-server-5.5 ist noch nicht konfiguriert. dpkg: Fehler beim Bearbeiten von mysql-server (--configure): Abhängigkeitsprobleme - verbleibt unkonfiguriert Trigger für libc-bin werden verarbeitet ... ldconfig deferred processing now taking place Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist. Fehler traten auf beim Bearbeiten von: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Do you have any clue, whats going on here?

    Read the article

  • Wireless networking on Gnome on Ubuntu 9 / 10

    - by WaveyDavey
    So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

    Read the article

  • Linux equivalent to Mac OS X's fs_usage

    - by Khai
    Is there a Linux equivalent to the Mac OS X command fs_usage? According to the man page it does the following: "report system calls and page faults related to filesystem activity in real-time". I suppose one option would be to use strace and filter the data, however the fs_usage command allows all the processes running on the system to be "traced" at the same time. Here's an example output: 03:44:25 stat64 erences/ByHost/org.mozilla.firefox.69AC0B48-F675-5045-B873-A28B119C33E7.plist 0.000029 firefox 03:44:25 stat64 /Users/**********/Library/Preferences 0.000011 firefox 03:44:25 statfs64 /Users/**********/Library/Preferences 0.000004 firefox 03:44:25 open /Users/**********/Library/Preferences/org.mozilla.firefox.plist.lockfile 0.000090 firefox 03:44:25 stat64 /Users/**********/Library/Preferences/org.mozilla.firefox.plist 0.000004 firefox 03:44:25 stat64 /Users/**********/Library/Preferences 0.000002 firefox 03:44:25 open /Users/**********/Library/Preferences/org.mozilla.firefox.plist.vjLkANe 0.000100 firefox Any ideas?

    Read the article

  • Most basic, low power home surveillance system

    - by cbp
    I am thinking of setting up a simple but effective surveillance system for my house that is: Very low powered (preferably no PCs left running out of stand-by mode) Cheap. When motion (or sound) is detected, I would like it to: Send an email/phone alert to me Record and upload video to the web (in case they steal the camera) So I imagine a system where I leave a netbook PC in stand-by mode and have it woken up by a motion detector. This initiates software to send alerts and periodically upload recorded video to the web. The software part is easy for me, but I'm not really a gadget-man so I'd like some advice on using a motion sensor of some sort to wake up the PC. Does anyone have some good advice? I know there are a couple of questions dealing with this topic already (see here: http://superuser.com/questions/3054/looking-for-a-moderately-priced-home-surveillance-setup, and here: http://superuser.com/questions/2929/can-you-suggest-a-great-home-security-setup-anti-burglars-e-t-c) - I am seeking more specific information with this question.

    Read the article

  • How to install nginx and install the configuration files too

    - by Burning the Codeigniter
    I've just completely uninstalled nginx 1.0.6 from my server (Ubuntu 11.04) using apt-get remove nginx rm -rf /etc/nginx/ rm -rf /usr/sbin/nginx rm /usr/share/man/man1/nginx.1.gz apt-get remove nginx* Now I want to install it again, however when starting nginx, I get errors such as: Restarting nginx: nginx: [emerg] open() "/etc/nginx/nginx.conf" failed (2: No such file or directory) Then I placed my own conf file, then I get a new error: Restarting nginx: nginx: [emerg] open() "/etc/nginx/mime.types" failed (2: No such file or directory) in /etc/nginx/nginx.conf:12 Now it seems that apt-get install nginx doesn't install it completely, I cleared the apt-get cache, doesn't seem to help. How can I get a full installation of nginx using apt-get?

    Read the article

  • Migrating a virtual domain controller for DR exercise

    - by Dips
    Hello gurus, I have a question. I have a requirement where I have a virtual domain controller and I have to migrate it to another virtual server in a different location. It is for test purposes to test out a DR scenario and the test will be deemed successful if the users that authenticate using the production DC can do so in the backup DC. I don't know much about this and thus don't know why it was assigned to me. So any assistance will be greatly appreciated. What I had in mind was: 1) Taking a snapshot of the production server and then restoring it in the other server. But I was told that this is not the suggested way of doing it. I was not told why. Is that right?If a snapshot is to be taken then what is the best way to do it. Any ideas on where I can get the documentation for this? 2) Another way would be to build the test DC from ground up, match it to the specs of production DC and then perform the DR test. Is this a better option? What will be needed to perform such an activity? Where can I find documentation on that? I apologise for the length of this query. As I said I am quite a novice and hope to get a better resolution. Any assistance will be greatly appreciated. Regards,

    Read the article

  • How do I configure an interface to have *both* a DHCP address and a static address in Ubuntu?

    - by Paul Hoffman
    In a lab setup, I want eth0 on a Ubuntu server box to get a DHCP address for talking to the outside world, and I also want to assign it a static 10.x.y.z address for talking to other boxes on the local network that have 10.x.y.z addresses. I want to do this by editing /etc/network/interfaces. The man page for /etc/network/interfaces is modeled after "here's a bunch of examples, I hope you can figure out the actual rules on your own". I don't see a way to give one interface two addresses using two different methods (static and dhcp), and initial fumbling didn't produce useful results.

    Read the article

  • Citrix client slow to launch

    - by user706837
    Was wondering if anyone else experience Citrix client to launch very slowly. While I'm a Windows SA by trade, I consider myself Novice+ on Linux, but I doubt thats the problem. This is the simple scenario: 1. Login to Citrix server to work from home 2. Click on the published application; this typically starts the local Citrix client. 3. Citrix client should start and you're off. Problem is between #2 and #3 I click on the application and 8 out of 9 times there is a 60 second delay and then I get an SSL connection error. I suspect this error is misleading since the connection took too long to open. But I dont know how to prove it (or fix it). I'm able to successfully manually launch wfcmgr without errors; so this leads me to believe Citrix client is installed correctly. I even leave it running thinking this may help, but I don't see a difference with or without this running first. The only times I'm able to connect successfully is when the Citrix client starts up a few seconds after clicking on the application. I've searched online for articles that might help, but tried a number of fixes without much difference. Even tried "ln -sf /dev/urandom /dev/random" as suggested by this article, but no dice:http://forums.citrix.com/message.jspa?messageID=1381276 My System (specs that may be relevant) Sony VAIO Laptop VGN-NW270F Linux Mint 11.04 Problem using: FireFox and Chrome Any help would be appreciated. Just trying to either find an answer or guidance on how to determine why its taking so long to launch the Citrix Client. Thanks

    Read the article

  • MultiPath configuration on RHEL5 and Clariion CX-300

    - by Kamil Z
    I have problem with discovering my FC-connected CX-300 storage. Frankly speaking I'm complete novice in FibreChannel, so step by step explanation would be appreciated. My configuration consist of two IBM HS20 blades with RHEL5.4 on board and 2x Qlogic ISP2422-based 4Gb Fibre Channel HBAs on each blade. As a FC switch there are two Brocades built in BladeCenter Chassis, and finally there is EMC Clariion CX-300. CX300, and Brocade switches should be configured properly, because they were working fine with previous configuration, which main defference was RHEL3 instead RHEL5.4 Below there is my output from several usefull commands: #lspci | grep Fibre 06:01.0 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) 06:01.1 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) #lsmod | grep qla qla2xxx 1084741 0 scsi_transport_fc 37577 1 qla2xxx scsi_mod 141717 10 scsi_dh,qla2xxx,sg,scsi_transport_fc,usb_storage,libata,mptspi,mptscsih,scsi_transport_spi,sd_mod #cat /proc/scsi/scsi Attached Devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: LSILOGIC Model: 1030 IM IM Rev: 1000 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 I'd followed instructions from this site (editing /etc/multipath.conf), but i failed after multipath -ll - the output was empty. Do you have any suggestions about discovering FC Connected LUNs in such configuration?

    Read the article

  • Immutable hard links on ext3/4?

    - by shovas
    In my research on file versioning at the fs level, snapshotting, and related ideas, I took a look at hard-links and exactly what they are and how they behave. Using rsync you can get a pretty slick poor man's snapshotting system up and running on file systems that don't natively support it. But, can you get immutable hard links on ext3/4 or any other file systems for that matter? My definition for immutable hard link is: A hard link which, when changed on one location, becomes a regular copy and no longer a hard link. I would like this because it would enable snapshotting use of the source data to link against instead of a copy of the data (in the case of the rsync snapshotting technique). I have gigabytes of data that can't be duplicated due to space restrictions but I have enough room if I can intelligently snapshot individual changed files with the rest linked to the source not a copy. Given all that, is there some other technique, feature or technology I'm really looking for?

    Read the article

  • Unable to use pbcopy while in tmux session

    - by user62139
    Running tmux 1.4 installed from ports on snow-leopard I am unable to use the built in OSX pbcopy command. Outside of tmux: > echo "abc" | pbcopy > echo pbpaste # or using ^v abc But inside of tmux: > echo "123" | pbcopy > echo pbpaste abc I've scoured the man page but can't find any options that might relate to this behaivor. I also can't understand why tmux would mess with shell redirection. Anybody have any clues?

    Read the article

  • How to use nsupdate to create NAPTR record

    - by Jon Skarpeteig
    What's a working example for creating a NAPTR record using nsupdate against Bind9? man nsupdate sais: update add {domain-name} {ttl} [class] {type} {data...} Adds a new resource record with the specified ttl, class and data. But I can't seem to find the correct format for NAPTR My attempt: echo -e 'update add enum.example.com 60 IN NAPTR 1.1.1.1.1."u"."E2U+sip"."!^.*[email protected]!" .'"\nsend"|nsupdate results in: invalid rdata format: not a valid number syntax error

    Read the article

  • Page reload needed several times before loading normally

    - by tim peterson
    Sorry my question is so vague I just have no idea where to start in solving it and am quite a novice with servers. Recently my site (an https connection, running on an Amazon EC2 ubuntu apache2.2) has this issue where I need to load the page several times (3-4) before it will load normally without issue. It will then load normally as long as I keep loading pages regularly (every couple seconds). It will stall again if I don't load pages for a few minutes. It has nothing to do with my application because I don't have this problem with the exact same app codebase on my Apache installation on my laptop. The only thing to my knowledge that I changed is that I installed mod_pagespeed https://developers.google.com/speed/pagespeed/mod. However, I have since turned it off by setting my pagespeed.conf to mod_pagespeed off. Unfortunately, that didn't solve the problem. I'm wondering general advice on how to troubleshoot this problem. For instance are there linux commands to check page loading peformance? Also, it looks like I have lots of new error.logs in my /var/log/apache2 directory which i believe weren't there a few months ago. lots of this : error.log RewriteLog.log.24.gz ssl_access.log.40.gz error.log.1 RewriteLog.log.25.gz ssl_access.log.41.gz error.log.10.gz RewriteLog.log.26.gz ssl_access.log.42.gz error.log.11.gz RewriteLog.log.27.gz any thoughts? thank you, tim

    Read the article

  • strange Postfix logwatch log summary on my ubuntu vps

    - by DannyRe
    Hi I would be very thankful if someone could help me on explaining this logwatch summary of my postfix installation on my ubuntu 10.04 vps. I dont really know if this might be a normal log file because of the many authentication failed entries and foreign IP addresses. Any advise for a novice? Thx! ****** Summary ************************************************************************************* 113 SASL authentication failed 195 Miscellaneous warnings 8.419K Bytes accepted 8,621 8.419K Bytes delivered 8,621 ======== ================================================== 3 Accepted 60.00% 2 Rejected 40.00% -------- -------------------------------------------------- 5 Total 100.00% ======== ================================================== 2 5xx Reject relay denied 100.00% -------- -------------------------------------------------- 2 Total 5xx Rejects 100.00% ======== ================================================== 116 Connections 1 Connections lost (inbound) 116 Disconnections 3 Removed from queue 3 Delivered 1 Hostname verification errors ****** Detail (10) ********************************************************************************* 113 SASL authentication failed -------------------------------------------------------------- 113 92.24.80.207 host-92-24-80-207.ppp.as43234.net 113 LOGIN 113 generic failure 195 Miscellaneous warnings ------------------------------------------------------------------ 113 SASL authentication failure: cannot connect to saslauthd server: Permission denied 41 inet_protocols: IPv6 support is disabled: Address family not supported by protocol 41 inet_protocols: configuring for IPv4 support only 2 5xx Reject relay denied ----------------------------------------------------------------- 1 46.242.103.110 unknown 1 [email protected] 1 114.42.142.103 114-42-142-103.dynamic.hinet.net 1 [email protected] 1 Connections lost (inbound) -------------------------------------------------------------- 1 After RCPT 3 Delivered ------------------------------------------------------------------------------- 3 myhost.xx 1 Hostname verification errors ------------------------------------------------------------ 1 Name or service not known 1 46.242.103.110 broadband-46-242-103-110.nationalcablenetworks.ru === Delivery Delays Percentiles ============================================================ 0% 25% 50% 75% 90% 95% 98% 100%

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >