Search Results

Search found 28230 results on 1130 pages for 'embedded development'.

Page 502/1130 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• Optimal sprite size for rotations

  - by Panda Pajama

  I am making a sprite based game, and I have a bunch of images that I get in a ridiculously large resolution and I scale them to the desired sprite size (for example 64x64 pixels) before converting them to a game resource, so when draw my sprite inside the game, I don't have to scale it. However, if I rotate this small sprite inside the game (engine agnostically), some destination pixels will get interpolated, and the sprite will look smudged. This is of course dependent on the rotation angle as well as the interpolation algorithm, but regardless, there is not enough data to correctly sample a specific destination pixel. So there are two solutions I can think of. The first is to use the original huge image, rotate it to the desired angles, and then downscale all the reaulting variations, and put them in an atlas, which has the advantage of being quite simple to implement, but naively consumes twice as much sprite space for each rotation (each rotation must be inscribed in a circle whose diameter is the diagonal of the original sprite's rectangle, whose area is twice of that original rectangle, supposing square sprites). It also has the disadvantage of only having a predefined set of rotations available, which may be okay or not depending on the game. So the other choice would be to store a larger image, and rotate and downscale while rendering, which leads to my question. What is the optimal size for this sprite? Optimal meaning that a larger image will have no effect in the resulting image. This is definitely dependent on the image size, the amount of desired rotations without data loss down to 1/256, which is the minimum representable color difference. I am looking for a theoretical general answer to this problem, because trying a bunch of sizes may be okay, but is far from optimal.

  Read the article

• rotate player based off of joystick

  - by pengume

  Hey everyone I have this game that i am making in android and I have a touch screen joystick that moves the player around based on the joysticks position. I cant figure out how to also get the player to rotate at the same angle of the joystick. so when the joystick is to the left the players bitmap is rotated to the left as well. Maybe someone here has some sample code I could look at here is the joysticks class that I am using. `public class GameControls implements OnTouchListener { public float initx = DroidzActivity.screenWidth - 45; //255; // 320 og 425 public float inity = DroidzActivity.screenHeight - 45;//425; // 480 og 267 public Point _touchingPoint = new Point( DroidzActivity.screenWidth - 45, DroidzActivity.screenHeight - 45); public Point _pointerPosition = new Point(DroidzActivity.screenWidth - 100, DroidzActivity.screenHeight - 100); // ogx 220 ogy 150 private Boolean _dragging = false; private boolean attackMode = false; @Override public boolean onTouch(View v, MotionEvent event) { update(event); return true; } private MotionEvent lastEvent; public boolean ControlDragged; private static double angle; public void update(MotionEvent event) { if (event == null && lastEvent == null) { return; } else if (event == null && lastEvent != null) { event = lastEvent; } else { lastEvent = event; } // drag drop if (event.getAction() == MotionEvent.ACTION_DOWN) { if ((int) event.getX() > 0 && (int) event.getX() < 50 && (int) event.getY() > DroidzActivity.screenHeight - 160 && (int) event.getY() < DroidzActivity.screenHeight - 0) { setAttackMode(true); } else { _dragging = true; } } else if (event.getAction() == MotionEvent.ACTION_UP) { if(isAttackMode()){ setAttackMode(false); } _dragging = false; } if (_dragging) { ControlDragged = true; // get the pos _touchingPoint.x = (int) event.getX(); _touchingPoint.y = (int) event.getY(); // Log.d("GameControls", "x = " + _touchingPoint.x + " y = " //+ _touchingPoint.y); // bound to a box if (_touchingPoint.x < DroidzActivity.screenWidth - 75) { // og 400 _touchingPoint.x = DroidzActivity.screenWidth - 75; } if (_touchingPoint.x > DroidzActivity.screenWidth - 15) {// og 450 _touchingPoint.x = DroidzActivity.screenWidth - 15; } if (_touchingPoint.y < DroidzActivity.screenHeight - 75) {// og 240 _touchingPoint.y = DroidzActivity.screenHeight - 75; } if (_touchingPoint.y > DroidzActivity.screenHeight - 15) {// og 290 _touchingPoint.y = DroidzActivity.screenHeight - 15; } // get the angle setAngle(Math.atan2(_touchingPoint.y - inity, _touchingPoint.x - initx) / (Math.PI / 180)); // Move the ninja in proportion to how far // the joystick is dragged from its center _pointerPosition.y += Math.sin(getAngle() * (Math.PI / 180)) * (_touchingPoint.x / 70); // og 180 70 _pointerPosition.x += Math.cos(getAngle() * (Math.PI / 180)) * (_touchingPoint.x / 70); // make the pointer go thru if (_pointerPosition.x > DroidzActivity.screenWidth) { _pointerPosition.x = 0; } if (_pointerPosition.x < 0) { _pointerPosition.x = DroidzActivity.screenWidth; } if (_pointerPosition.y > DroidzActivity.screenHeight) { _pointerPosition.y = 0; } if (_pointerPosition.y < 0) { _pointerPosition.y = DroidzActivity.screenHeight; } } else if (!_dragging) { ControlDragged = false; // Snap back to center when the joystick is released _touchingPoint.x = (int) initx; _touchingPoint.y = (int) inity; // shaft.alpha = 0; } } public void setAttackMode(boolean attackMode) { this.attackMode = attackMode; } public boolean isAttackMode() { return attackMode; } public void setAngle(double angle) { this.angle = angle; } public static double getAngle() { return angle; } }` I should also note that the player has animations based on when he is moving or attacking.

  Read the article

• cocos2d event handler not fired when reentering scene

  - by Adam Freund

  I am encountering a very strange problem with my cocos2d app. I add a sprite to the page and have an event handler linked to it which replaces the scene with another scene. On that page I have another button to take me back to the original scene. When I am back on the original scene, the eventHandler doesn't get fired when I click on the sprite. Below is the relevant code. Thanks for any help! CCMenuItemImage *backBtnImg = [CCMenuItemImage itemWithNormalImage:@"btn_back.png" selectedImage:@"btn_back_pressed.png" target:self selector:@selector(backButtonTapped:)]; backBtnImg.position = ccp(45, 286); CCMenu *backBtn = [CCMenu menuWithItems:backBtnImg, nil]; backBtn.position = CGPointZero; [self addChild:backBtn]; EventHandler method (doesn't get called when the scene is re-entered). (void)backButtonTapped:(id)sender { NSLog(@"backButtonTapped\n"); CCMenuItemImage *backButton = (CCMenuItemImage *)sender; [backButton setNormalImage:[CCSprite spriteWithFile:@"btn_back_pressed.png"]]; [[CCDirector sharedDirector] replaceScene:[CCTransitionFade transitionWithDuration:.25 scene:[MenuView scene] withColor:ccBLACK]]; }

  Read the article

• How do I find the closest points(thereby forming a polygon) enclosing a particular point?(see image)

  - by nilspin

  I am working with a game engine, and my task is to add code for simulating fracture of rigid meshes. Right now I'm only working on breaking a cube. I am using Voronoi's algorithm to make a (realistic)fractured shard and I am using the half-plane method to generate a voronoi cell. Now the way I do this is for every seed point, I make planes that are perpendicular bisector planes(the straight black lines in the image) with rest of the seed points and I calculate the intersections of all these planes to give me distinct points(all the orange dots). I've gotten this far. Out of all these calculated intersection points, I only need the ones that are closest and enclosing the seed point(the points encircled in red) and I need to discard all the rest. Information that I have : 1) Plane equations of all planes(defined by normalized normal vectors and their distance from origin) 2) Points of intersection(that I've calculated) Can anybody help me find out how I can find the points encircled in red? Thanks.

  Read the article

• How do I set an event off when player is on certain tile?

  - by Tom Burman

  Here is the code I use to create and print my map to the canvas: var board = []; function loadMap(map) { if (map == 1) { return [ [2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,3,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,3,0,0,2], [2,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,3,3,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,3,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,3,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,3,0,3,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,3,3,3,3,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,3,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,3,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,3,3,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,3,3,3,3,3,3,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2] ]; } } board = loadMap(1); enterfor (y = 0; y <= viewHeight; y++) { for (x = 0; x <= viewWidth; x++) { var theX = x * 32; var theY = y * 32; context.drawImage(mapTiles[board[y+viewY][x+viewX]], theX, theY, 32, 32); } } And here is the code I use for player movement: canvas.addEventListener('keydown', function(e) { console.log(e); var key = null; switch (e.which) { case 37: // Left if (playerX > 0) playerX--; break; case 38: // Up if (playerY > 0) playerY--; break; case 39: // Right if (playerX < worldWidth) playerX++; break; case 40: // Down if (playerY < worldHeight) playerY++; break; } viewX = playerX - Math.floor(0.5 * viewWidth); if (viewX < 0) viewX = 0; if (viewX+viewWidth > worldWidth) viewX = worldWidth - viewWidth; viewY = playerY - Math.floor(0.5 * viewHeight); if (viewY < 0) viewY = 0; if (viewY+viewHeight > worldHeight) viewY = worldHeight - viewHeight; }, false); What I am looking for is a method for when the player lands on tile 3 he loses health. I have tried to use this in the player movement but it doesnt seem to work e.g the left movement: case 37: // Left if (playerX > 0) playerX--; if(board[x2 - 1] == 3) { health--; playerX--; }

  Read the article

• Show path of a body of where it should go after linear impulse is applied

  - by Farooq Arshed

  I am making a game with Andengine and Box2D. I have a dynamic body and I apply linear impulse on the body to move it around when the user have touched the screen. Now I want to show the path where the body will go when the user have touched. If you have played Angry Birds or Basket Ball Shoot or any other which have projectile motion with a path shown you will get my point. I want to show the white dots which are shown in those games.

  Read the article

• Using glReadBuffer returns black image instead of the actual image only on Intel cards

  - by cloudraven

  I have this piece of code glReadBuffer( GL_FRONT ); glReadPixels( 0, 0, width, height, GL_RGB, GL_UNSIGNED_BYTE, buffer ); Which works just perfectly in all the Nvidia and AMD GPUs I have tried, but it fails in almost every single Intel built-in video that I have tried. It actually works in a very old 945GME, but fails in all the others. Instead of getting a screenshot I am actually getting a black screen. If it helps, I am working with the Doom3 Engine, and that code is derived from the built-in screen capture code. By the way, even with the original game I cannot do screen capture on those intel devices anyway. My guess is that they are not implementing the standard correctly or something. Is there a workaround for this?

  Read the article

• Change collision action

  - by PatrickR

  I have a collision detection and its working fine, the problem is, that whenever my "bird" is hitting a "cloud", the cloud dissapers and i get some points. The same happens for the "sol" which it should, but not with the clouds. How can this be changed ? ive tryed a lot, but can seem to figger it out. Collision Code - (void)update:(ccTime)dt { bird.position = ccpAdd(bird.position, skyVelocity); NSMutableArray *projectilesToDelete = [[NSMutableArray alloc] init]; for (CCSprite *bird in _projectiles) { bird.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(bird.position.x, bird.position.y, [bird boundingBox].size.width, [bird boundingBox].size.height); NSMutableArray *targetsToDelete = [[NSMutableArray alloc] init]; for (CCSprite *cloudSprite in _targets) { cloudSprite.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(cloudSprite.position.x, cloudSprite.position.y, [cloudSprite boundingBox].size.width, [cloudSprite boundingBox].size.height); if (CGRectIntersectsRect([bird boundingBox], [cloudSprite boundingBox])) { [targetsToDelete addObject:cloudSprite]; } } for (CCSprite *solSprite in _targets) { solSprite.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(solSprite.position.x, solSprite.position.y, [solSprite boundingBox].size.width, [solSprite boundingBox].size.height); if (CGRectIntersectsRect([bird boundingBox], [solSprite boundingBox])) { [targetsToDelete addObject:solSprite]; score += 50/2; [scoreLabel setString:[NSString stringWithFormat:@"%d", score]]; } } // NÅR SKYEN BLIVER RAMT AF FUGLEN for (CCSprite *cloudSprite in targetsToDelete) { //[_targets removeObject:cloudSprite]; //[self removeChild:cloudSprite cleanup:YES]; } // NÅR SOLEN BLIVER RAMT AF FUGLEN for (CCSprite *solSprite in targetsToDelete) { [_targets removeObject:solSprite]; [self removeChild:solSprite cleanup:YES]; } if (targetsToDelete.count > 0) { [projectilesToDelete addObject:bird]; } [targetsToDelete release]; } // NÅR FUGLEN BLIVER RAMT AF ALT ANDET for (CCSprite *bird in projectilesToDelete) { //[_projectiles removeObject:bird]; //[self removeChild:bird cleanup:YES]; } [projectilesToDelete release]; }

  Read the article

• How can I select an audio output device in directshow

  - by Vibhore Tanwer

  I was wondering how I can select the output device for audio in directshow. I am able to get available audio output devices in directshow. But how can I make one of these to be audio output device. Its always going for the default audio device. I want to be able to output audio on my choice of device. I have been struggling through google but couldn't find anything useful. All I could get was this link but it doesn't really solve my problem. Any help will be really helpful for me.

  Read the article

• How to move an object using X and Y coordinates in JavaScript

  - by Geroy290

  I am making a 2d game with JavaScript and HTML5 and am trying to move an image that I have drawn with JavaScript like so: //canvas var c = document.getElementById("gameCanvas"); var ctx = c.getContext("2d"); //baseball var baseball = new Image(); baseball.onload = function() { ctx.drawImage(baseball, 400, 425); }; baseball.src = "baseball2.png"; I'm not sure how I would move it though, I have seen many people seem to just type something like ballX and ballY but I don't understand where the actual x and y definition comes from. Here is my code so far: http://jsfiddle.net/xRfua/ I have a different image source but it is a local source so I couldn't include it. Thanks in a dvance for any help!

  Read the article

• Projective texture and deferred lighting

  - by Vodácek

  In my previous question, I asked whether it is possible to do projective texturing with deferred lighting. Now (more than half a year later) I have a problem with my implementation of the same thing. I am trying to apply this technique in light pass. (my projector doesn't affect albedo). I have this projector View a Projection matrix: Matrix projection = Matrix.CreateOrthographicOffCenter(-halfWidth * Scale, halfWidth * Scale, -halfHeight * Scale, halfHeight * Scale, 1, 100000); Matrix view = Matrix.CreateLookAt(Position, Target, Vector3.Up); Where halfWidth and halfHeight is are half of the texture's width and height, Position is the Projector's position and target is the projector's target. This seems to be ok. I am drawing full screen quad with this shader: float4x4 InvViewProjection; texture2D DepthTexture; texture2D NormalTexture; texture2D ProjectorTexture; float4x4 ProjectorViewProjection; sampler2D depthSampler = sampler_state { texture = <DepthTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D normalSampler = sampler_state { texture = <NormalTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D projectorSampler = sampler_state { texture = <ProjectorTexture>; AddressU = Clamp; AddressV = Clamp; }; float viewportWidth; float viewportHeight; // Calculate the 2D screen position of a 3D position float2 postProjToScreen(float4 position) { float2 screenPos = position.xy / position.w; return 0.5f * (float2(screenPos.x, -screenPos.y) + 1); } // Calculate the size of one half of a pixel, to convert // between texels and pixels float2 halfPixel() { return 0.5f / float2(viewportWidth, viewportHeight); } struct VertexShaderInput { float4 Position : POSITION0; }; struct VertexShaderOutput { float4 Position :POSITION0; float4 PositionCopy : TEXCOORD1; }; VertexShaderOutput VertexShaderFunction(VertexShaderInput input) { VertexShaderOutput output; output.Position = input.Position; output.PositionCopy=output.Position; return output; } float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { float2 texCoord =postProjToScreen(input.PositionCopy) + halfPixel(); // Extract the depth for this pixel from the depth map float4 depth = tex2D(depthSampler, texCoord); //return float4(depth.r,0,0,1); // Recreate the position with the UV coordinates and depth value float4 position; position.x = texCoord.x * 2 - 1; position.y = (1 - texCoord.y) * 2 - 1; position.z = depth.r; position.w = 1.0f; // Transform position from screen space to world space position = mul(position, InvViewProjection); position.xyz /= position.w; //compute projection float3 projection=tex2D(projectorSampler,postProjToScreen(mul(position,ProjectorViewProjection)) + halfPixel()); return float4(projection,1); } In first part of pixel shader is recovered position from G-buffer (this code I am using in other shaders without any problem) and then is tranformed to projector viewprojection space. Problem is that projection doesn't appear. Here is an image of my situation: The green lines are the rendered projector frustum. Where is my mistake hidden? I am using XNA 4. Thanks for advice and sorry for my English. EDIT: Shader above is working but projection was too small. When I changed the Scale property to a large value (e.g. 100), the projection appears. But when the camera moves toward the projection, the projection expands, as can bee seen on this YouTube video.

  Read the article

• Enemy Spawning method in a Top-Down Shooter

  - by Chris Waters

  I'm working on a top-down shooter akin to DoDonPachi, Ikaruga, etc. The camera movement through the world is handled automatically with the player able to move inside of the camera's visible region. Along the way, enemies are scripted to spawn at particular points along the path. While this sounds straightforward, I could see two ways to define these points: Camera's position: 'trigger' spawning as the camera passes by the points Time along path: "30 seconds in, spawn 2 enemies" In both cases, the camera-relative positions would be defined as well as the behavior of the enemy. The way I see it, the way you define these points will directly affect how the 'level editor', or what have you, will work. Would there be any benefits of one approach over the other?

  Read the article

• Reversi/Othello early-game evaluation function

  - by Vladislav Il'ushin

  I've written my own Reversi player, based on the MiniMax algorithm, with Alpha-Beta pruning, but in the first 10 moves my evaluation function is too slow. I need a good early-game evaluation function. I'm trying to do it with this matrix (corresponding to the board) which determines how favourable that square is to have: { 30, -25, 10, 5, 5, 10, -25, 30,}, {-25, -25, 1, 1, 1, 1, -25, -25,}, { 10, 1, 5, 2, 2, 5, 1, 10,}, { 5, 1, 2, 1, 1, 2, 1, 5,}, { 5, 1, 2, 1, 1, 2, 1, 5,}, { 10, 1, 5, 2, 2, 5, 1, 10,}, {-25, -25, 1, 1, 1, 1, -25, -25,}, { 30, -25, 10, 5, 5, 10, -25, 30,},}; But it doesn't work well. Have you even written an early-game evaluation function for Reversi?

  Read the article

• Class Design - Space Simulator

  - by Peteyslatts

  I have pretty much taught myself everything I know about programming, so while I know how to teach myself (books, internet and reading API's), I'm finding that there hasn't been a whole lot in the way of good programming. So I have two questions: First the broad one: Does anyone have suggestions as to sources for learning about good programming habits and techniques? I'd prefer it if the resource wasn't a 5000 page tome. The more I can read it in installments the better. More specifically: I am finishing up learning the basics of XNA and I want to create a space simulator to test my knowledge. This isn't a full scale simulator, but just something that covers everything I learned. It's also going to be modular so I can build on it, after I get the basics down. One of the early features I want to implement is AI. And I want to take this into account as I'm designing my classes so I can minimize rewriting code. So my question: How should I design ship classes so that both the player and AI can use them? The only idea I have so far is: Create a ship class that contains stats, models, textures, collision data etc. The player and AI would then have the data for position, rotation, health, etc and would base their status off of the ship stats.

  Read the article

• Maya Animated Character export for XNA 4.0 problem

  - by FahidK

  To begin with, I'm trying to export an animated character in .fbx format from Maya 2013 to XNA 4.0 In Maya, The Model has a basic rig and the animations are in clips made in the Trax editor. so the issue i'm having is after selecting the model and the root joint and then hitting export in .fbx format, for some reason when i open the exported .fbx file the joint system is detached from the model with no animation. Btw, i have the animations in clips so that they can be called in code, for example "run","walk","attack". So, what can i do to solve this problem? Thank you.

  Read the article

• Drawing texture does not work anymore with a small amount of triangles

  - by Paul

  When i draw lines, the vertices are well connected. But when i draw the texture inside the triangles, it only works with i<4 in the for loop, otherwise with i<5 for example, there is a EXC_BAD_ACCESS message, at @synthesize textureImage = _textureImage. I don't understand why. (The generatePolygons method seems to work fine as i tried to draw lines with many vertices as in the second image below. And textureImage remains the same for i<4 or i<5 : it's a 512px square image). Here are the images : What i want to achieve is to put the red points and connect them to the y-axis (the green points) and color the area (the green triangles) : If i only draw lines, it works fine : Then with a texture color, it works for i<4 in the loop (the red points in my first image, plus the fifth one to connect the last y) : But then, if i set i<5, the debug tool says EXC_BAD_ACCESS at the synthesize of _textureImage. Here is my code : I set a texture color in HelloWordLayer.mm with : CCSprite *textureImage = [self spriteWithColor:color3 textureSize:512]; _terrain.textureImage = textureImage; Then in the class Terrain, i create the vertices and put the texture in the draw method : @implementation Terrain @synthesize textureImage = _textureImage; //EXC_BAD_ACCESS for i<5 - (void)generatePath2{ CGSize winSize = [CCDirector sharedDirector].winSize; float x = 40; float y = 0; for(int i = 0; i < kMaxKeyPoints+1; ++i) { _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += 30; } } -(void)generatePolygons{ _nPolyVertices = 0; float x1 = 0; float y1 = 0; int keyPoints = 0; for (int i=0; i<4; i++){ /* HERE : 4 = OK / 5 = crash */ //V0: at (0,0) _polyVertices[_nPolyVertices] = CGPointMake(x1, y1); _polyTexCoords[_nPolyVertices++] = CGPointMake(x1, y1); //V1: to the first "point" _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); keyPoints++; //from point at index 0 to 1 //V2, same y as point n°2: _polyVertices[_nPolyVertices] = CGPointMake(0, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(0, _hillKeyPoints[keyPoints].y); //V1 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V2 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V3 = same x,y as point at index 1 _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); y1 = _polyVertices[_nPolyVertices].y; _nPolyVertices++; } } - (id)init { if ((self = [super init])) { [self generatePath2]; [self generatePolygons]; } return self; } - (void) draw { //glDisable(GL_TEXTURE_2D); glDisableClientState(GL_COLOR_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glBindTexture(GL_TEXTURE_2D, _textureImage.texture.name); glColor4f(1, 1, 1, 1); glVertexPointer(2, GL_FLOAT, 0, _polyVertices); glTexCoordPointer(2, GL_FLOAT, 0, _polyTexCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, (GLsizei)_nPolyVertices); glColor4f(1, 1, 1, 1); for(int i = 1; i < 40; ++i) { ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } // restore default GL states glEnable(GL_TEXTURE_2D); glEnableClientState(GL_COLOR_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); } Do you see anything wrong in this code? Thanks for your help

  Read the article

• Best way to handle realtime melee AI in authoritative network environment

  - by PrimeDerektive

  So i've been working on a multiplayer game for a bit; it's a co-op action RPG with real-time combat. If you've seen or played TERA, I'd say it's comparable to that, but not an MMO, heh. I'm currently handling the AI units authoritatively, the server calculates their pathing, movement, and pursue/attack logic, and syncs the movement to the clients 15x per second, and the state changes when they happen. When I emulate 200ms ping, though, the client can perceive being out of range to an AI's attack, but still take the hit, because on the server he hadn't moved that far yet. This also plays hell with my real-time blocking. I don't really want to allow the clients to be allowed to say "that was out of range" or "I blocked that", but I'm not really sure how else to handle it.

  Read the article

• Child object free movement on Parent object

  - by The415

  Just to be straightforward, I am completely new to many aspects of coding and am searching for different specs and guidelines to aid me on my journey to crafting a wonderful game in Epic Games' Unreal Engine 4. Okay, I know upon viewing this, some may have little to no clue what I mean, so I'll put it like this to explain what I mean : Imagine a third person game with a simple model of a character. Now, say I have an object as a torso of a character in a game. Now Say I have an object as a head of the character. How could I keep the head as a child of the torso, but at the same time, allow it to move with the camera angle.

  Read the article

• Super-quick MIDI generator with nonrestrictive license?

  - by Ricket

  I'm working on my Ludum Dare entry and trying to figure out how in the world I'm ever going to get background music. I found WolframTones, but the license is too restrictive: Unless otherwise specified, this Site and content presented on this Site are for your personal and noncommercial use. You may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information or content obtained from this Site. For commercial and other uses, contact us. But I really like the interface! It's a lot like sfxr - click a genre and download a song. That's so cool. Is there another program that does this same sort of thing but without a restrictive license, so that I can generate a bgm and use it in my game?

  Read the article

• Balancing agressive invites

  - by Nils Munch

  I am designing a trading card game for mobiles, with the possibility to add cards to your collection using Gems, aquired through victories and inapp purchases. I am thinking to increase the spread of the game with a tracking system on game invites, enabling the user to invite a friend to play the game. If the friend doesn't own the game client (which is free) he will be offered to download it. If he joins the game, the original player earns X amount of gems as an reward. There can only be one player per mobile device, which should rule out some harvesting. My question is, how do you think the structure of this would be recieved ? All invites are mail based, unless the player already exists in the game world (then he gets a ingame invitation.) I have set a flood filter, so a player can only invite a friend (without the client installed) once a month.

  Read the article

• Slerping rotation mirrors

  - by Esa

  I rotate my game character to watch at the target using the following code: transform.rotation = Quaternion.Slerp(startQuaternion, lookQuaternion, turningNormalizer*turningSpeed/10f) startQuaternion is the character's current rotation when a new target is given. lookQuaternion is the direction the character should look at and it's set like this: destinationVector = currentWaypoint.transform.position - transform.position; lookQuaternion = Quaternion.LookRotation(destinationVector, Vector3.up); turningNormalizer is just Time.deltaTime incremented and turningSpeed is a static value given in the editor. The problem is that while the character turns as it should most of the time, it has problems when it has to do close to 180 degrees. Then it at times jitters and mirrors the rotation: In this poorly drawn image the character(on the right) starts to turn towards the circle on the left. Instead of just turning either through left or right it starts this "mirror dance": It starts to rotate towards the new facing Then it suddenly snaps to the same angle but on other side and keeps rotating It does this "mirroring" so long until it looks at the target. Is this a thing with quaternions, slerping/lerping or something else?

  Read the article

• Examples of good Javascript/HTML5 based games

  - by Zuch

  Now that Flash is largely being replaced with HTML5 elements (video, audio, canvas, etc.) are there any good examples of web-based games built on completely open standards (meaning Javascript, HTML and CSS)? I see a lot of examples of pure HTML5 implementations of what was once only in Flash (like stuff here: http://www.html5rocks.com/) but not many games, a domain which still seem dominated by Flash. I'm curious what's possible and what the limitations are.

  Read the article

• How to make it so units don't stack up in one location?

  - by Daggio

  So I'm making a game in AS3, it's a strategy DotA-like game (for flash game equivalent, there's UDE) so far so good, I have the A* pathfinding algorithm all sorted out and the minion units move to the desired location as I want them to be. The problem a rise when a unit stops in a node that has already occupied by another friendly unit. Both (or more than two) of them stacks up in one location, it looks like they're one unit. I want to add collision detection so when they collide they don't stack up together. But now they stop when they collide on they way to a node. This isn't good because they won't move at all midway (they won't respond to enemy attacks like that). I've added a deltatime so they only stopped for 2 seconds before they move again to their designated designation. This moves them again but they flicker. Not how I want it. So, like the title said. How to make more than one units don't stack up in a node? And if possible, how to make them not flicker while moving (it's good if they can tell other friendly units on the way and avoid them accordingly)?

  Read the article

• Calculate velocity of a bullet ricocheting on a circle

  - by SteveL

  I made a picture to demostrate what I need,basecaly I have a bullet with velocity and I want it to bounce with the correct angle after it hits a circle Solved(look the accepted answer for explain): Vector.vector.set(bullet.vel); //->v Vector.vector2.setDirection(pos, bullet.pos); //->n normal from center of circle to bullet float dot=Vector.vector.dot(Vector.vector2); //->dot product Vector.vector2.mul(dot).mul(2); Vector.vector.sub(Vector.vector2); Vector.vector.y=-Vector.vector.y; //->for some reason i had to invert the y bullet.vel.set(Vector.vector);

  Read the article

• Xna, after mouse click cpu usage goes 100%

  - by kosnkov

  Hi i have following code and it is enough just if i click on blue window then cpu goes to 100% for like at least one minute even with my i7 4 cores. I just check even with empty project and is the same !!! public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; private Texture2D cursorTex; private Vector2 cursorPos; GraphicsDevice device; float xPosition; float yPosition; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { Viewport vp = GraphicsDevice.Viewport; xPosition = vp.X + (vp.Width / 2); yPosition = vp.Y + (vp.Height / 2); device = graphics.GraphicsDevice; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); cursorTex = Content.Load<Texture2D>("strzalka"); } protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); spriteBatch.Draw(cursorTex, cursorPos, Color.White); spriteBatch.End(); base.Draw(gameTime); } }

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >