Search Results

Search found 32277 results on 1292 pages for 'module development'.

Page 555/1292 | < Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >

• Unable to find good parameters for behavior of a puck in Farseer

  - by Krumelur

  EDIT: I have tried all kinds of variations now. The last one was to adjust the linear velocity in each step: newVel = oldVel * 0.9f - all of this including your proposals kind of work, however in the end if the velocity is little enough, the puck sticks to the wall and slides either vertically or horizontally. I can't get rid of this behavior. I want it to bounce, no matter how slow it is. Retitution is 1 for all objects, Friction is 0 for all. There is no gravity. What am I possibly doing wrong? In my battle to learn and understand Farseer I'm trying to setup a simple Air Hockey like table with a puck on it. The table's border body is made up from: Vertices aBorders = new Vertices( 4 ); aBorders.Add( new Vector2( -fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, -fHalfHeight ) ); aBorders.Add( new Vector2( -fHalfWidth, -fHalfHeight ) ); FixtureFactory.AttachLoopShape( aBorders, this ); this.CollisionCategories = Category.All; this.CollidesWith = Category.All; this.Position = Vector2.Zero; this.Restitution = 1f; this.Friction = 0f; The puck body is defined with: FixtureFactory.AttachCircle( DIAMETER_PHYSIC_UNITS / 2f, 0.5f, this ); this.Restitution = 0.1f; this.Friction = 0.5f; this.BodyType = FarseerPhysics.Dynamics.BodyType.Dynamic; this.LinearDamping = 0.5f; this.Mass = 0.2f; I'm applying a linear force to the puck: this.oPuck.ApplyLinearImpulse( new Vector2( 1f, 1f ) ); The problem is that the puck and the walls appear to be sticky. This means that the puck's velocity drops to zero to quickly below a certain velocity. The puck gets reflected by the walls a couple of times and then just sticks to the left wall and continues sliding downwards the left wall. This looks very unrealistic. What I'm really looking for is that a puck-wall-collision does slow down the puck only a tiny little bit. After tweaking all values left and right I was wondering if I'm doing something wrong. Maybe some expert can comment on the parameters?

  Read the article

• How do I efficiently generate chunks to fill entire screen when my player moves?

  - by Trixmix

  In my game I generate chunks when the player moves. The chunks are all generated on the fly, but currently I just created a simple flat 8X8 floor. What happens is that when he moves to a new chunk the chunk in the direction of the player gets generated and its neighboring chunks. This is not efficient because the generator does not fill the entire screen. I did try to use recursion but its not as fast as I would like it to be. My question is what would be an efficient way of doing so? How does minecraft do so? When I say this I mean just the way it PICKS which chunks to generate and in what order. Not how they generate or how they are saved in regions, just the order/way it generates them. I just want to know what is a good way to load chunks around the player.

  Read the article

• Per fragment lighting with OpenGL 4.x tessellated model

  - by Finlaybob

  I'm experienced with OpenGL 3+. I'm dabbling with tessellation shaders and have now got to a point where I have a nicely tessellated teapot/plane demo (quick look here) As can be seen from the screenshots, the lighting is broken (though admittedly doesn't look too bad in the image) I've tried to add a normal map to the equation but it still doesn't come out right, I can calculate the normals, tangents and binormals per triangle in the geometry shader but still looks wrong. I think the question would be; How do I add per fragment lighting to a tessellated model? The teapot is 32 16-point patches, the plane is one single 16 point patch. The shaders are here, but they are a complete mess, so I don't blame anyone who cant make sense of them. But peruse at your leisure if you like. Also, if this question is more suited to be somewhere else i.e. Stack Overflow or the Programming stack please let me know.

  Read the article

• Implementing a switch statement based on user input

  - by Dave Voyles

  I'm trying to delay the time it takes for the main menu screen to pop up after a user has won / lost a match. As it stands, the game immediately displays a message stating "you won / lost" and waits for 6 seconds before loading the menu screen. I would also like players to have the ability to press a key to advance to the menu screen immediately but thus far my switch statement doesn't seem to do the trick. I've included the switch statement, along with my (theoretical) inputs. What could I be doing wrong here? if (gamestate == GameStates.End) switch (input.IsMenuDown(ControllingPlayer)) { case true: ScreenManager.AddScreen(new MainMenuScreen(), null); // Draws the MainMenuScreen break; case false: if (screenLoadDelay > 0) { screenLoadDelay -= gameTime.ElapsedGameTime.TotalSeconds; } ScreenManager.AddScreen(new MainMenuScreen(), null); // Draws the MainMenuScreen break; } /// <summary> /// Checks for a "menu down" input action. /// The controllingPlayer parameter specifies which player to read /// input for. If this is null, it will accept input from any player. /// </summary> public bool IsMenuDown(PlayerIndex? controllingPlayer) { PlayerIndex playerIndex; return IsNewKeyPress(Keys.Down, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.DPadDown, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.LeftThumbstickDown, controllingPlayer, out playerIndex); }

  Read the article

• Splitting a tetris game apart - where to put time-management?

  - by nightcracker

  I am creating a tetris game in C++ & SDL, and I'm trying to do it "good" by making it object-oriented and keeping scopes small. So far I have the following structure: A main with some lowlevel SDL set up and handling input A game class that keeps track of score and provides the interface for main (move block down, etc) A map class that keeps track of the current game field, which blocks are where. Used by the game class. A block class that consists of the current falling block, used by game. A renderer class abstracting low level SDL to a format where you render "tetris blocks". Used by map and block. Now I have a though time where to place the time-management of this game. For example, where should be decided when a block bumps the bottom of the screen how long it takes the current block locks in place and a new block spawns? I also have an other unrelated question, is there some place where you can find some standard data on tetris like standard score tables, rulesets, timings, etc?

  Read the article

• How can I have multiple layers in my map array?

  - by Manl400

  How do I load Levels in my game, as in Layer 1 would be Objects, Layer 2 would be Characters and so on. I only need 3 layers, and they will all be put on top of each other. i.e having a flower with a transparent background to be put on grass or dirt on the layer below.I would like to Read From the same file too. How would i go about doing this? Any help would be appreciated. I load the map from a level file which are just numbers corresponding to a tile in the tilesheet. Here is the level file [Layer1] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [Layer2] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [Layer3] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 And here is the code that interprets it void LoadMap(const char *filename, std::vector< std::vector <int> > &map) { std::ifstream openfile(filename); if(openfile.is_open()) { std::string line, value; int space; while(!openfile.eof()) { std::getline(openfile, line); if(line.find("[TileSet]") != std::string::npos) { state = TileSet; continue; } else if (line.find("[Layer1]") != std::string::npos) { state = Map; continue; } switch(state) { case TileSet: if(line.length() > 0) tileSet = al_load_bitmap(line.c_str()); break; case Map: std::stringstream str(line); std::vector<int> tempVector; while(!str.eof()) { std::getline(str, value, ' '); if(value.length() > 0) tempVector.push_back(atoi(value.c_str())); } map.push_back(tempVector); break; } } } else { } } and this is how it draws the map. Also the tile sheet is 1280 by 1280 and the tilesizeX and tilesizeY is 64 void DrawMap(std::vector <std::vector <int> > map) { int mapRowCount = map.size(); for(int i, j = 0; i < mapRowCount; i ++) { int mapColCount = map[i].size(); for (int j = 0; j < mapColCount; ++j) { int tilesetIndex = map[i][j]; int tilesetRow = floor(tilesetIndex / TILESET_COLCOUNT); int tilesetCol = tilesetIndex % TILESET_COLCOUNT; al_draw_bitmap_region(tileSet, tilesetCol * TileSizeX, tilesetRow * TileSizeY, TileSizeX, TileSizeY, j * TileSizeX, i * TileSizeX, NULL); } } } EDIT: http://i.imgur.com/Ygu0zRE.jpg

  Read the article

• How to acheive a smoother lighting effect

  - by Cyral

  I'm making a tile based game in XNA So currently my lightning looks like this: How can I get it to look like this? Instead of each block having its own tint, it has a smooth overlay. I'm assuming some sort of shader, and to tell it the lighting and blur it some how. But im not an expert with shaders. My current lighting calculates the light, and then passes it to a spritebatch and draws with a color parameter EDIT: No longer uses spritebatch tint, I was testing and now pass parameters to set the light values. But still looking for a way to smooth it

  Read the article

• Rotation of viewplatform in Java3D

  - by user29163

  I have just started with Java3D programming. I thought I had built up some basic intuition about how the scene graph works, but something that should work, does not work. I made a simple program for rotating a pyramid around the y-axis. This was done just by adding a RotationInterpolator R to the TransformGroup above the pyramid. Then I thought hey, can I now remove the RotationInterpolator from this TransformGroup, then add it to the TransformGroup above my ViewPlatform leaf. This should work if I have understood how things work. Adding the RotationInterpolator to this TransformGroup, should make the children of this TransformGroup rotate, and the ViewingPlatform is a child of the TransformGroup. Any ideas on where my reasoning is flawed? Here is the code for setting up the universe, and the view branchgroup. import java.awt.*; import java.awt.event.*; import javax.media.j3d.*; import javax.vecmath.*; public class UniverseBuilder { // User-specified canvas Canvas3D canvas; // Scene graph elements to which the user may want access VirtualUniverse universe; Locale locale; TransformGroup vpTrans; View view; public UniverseBuilder(Canvas3D c) { this.canvas = c; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view = new View(); view.addCanvas3D(c); view.setPhysicalBody(body); view.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); Transform3D s = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 10.0f)); t.rotX(-Math.PI/4); s.set(new Vector3f(0.0f, 0.0f, 10.0f)); //forandre verdier her for å endre viewing position t.mul(s); ViewPlatform vp = new ViewPlatform(); vpTrans = new TransformGroup(t); vpTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); // Rotator stuff Transform3D yAxis = new Transform3D(); //yAxis.rotY(Math.PI/2); Alpha rotationAlpha = new Alpha( -1, Alpha.INCREASING_ENABLE, 0, 0,4000, 0, 0, 0, 0, 0); RotationInterpolator rotator = new RotationInterpolator( rotationAlpha, vpTrans, yAxis, 0.0f, (float) Math.PI*2.0f); RotationInterpolator rotator2 = new RotationInterpolator( rotationAlpha, vpTrans); BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 1000.0); rotator.setSchedulingBounds(bounds); vpTrans.addChild(rotator); vpTrans.addChild(vp); vpRoot.addChild(vpTrans); view.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } public void addBranchGraph(BranchGroup bg) { locale.addBranchGraph(bg); } }

  Read the article

• Problem with a* implementation in pygame

  - by piyush3dxyz

  Yesterday i decide to make RTS game in pygame(pygame is best).I figured out many components of RTS game like unit selecting,health,resources but only 1 thing i still not understand.. which is a* pathfinding in pygame... I also done little bit of research on wiki,articles and papers...but still cant figure out problem.... function A*(start,goal) closedset := the empty set // The set of nodes already evaluated. openset := {start} // The set of tentative nodes to be evaluated, initially containing the start node came_from := the empty map // The map of navigated nodes. g_score[start] := 0 // Cost from start along best known path. // Estimated total cost from start to goal through y. f_score[start] := g_score[start] + heuristic_cost_estimate(start, goal) while openset is not empty current := the node in openset having the lowest f_score[] value if current = goal return reconstruct_path(came_from, goal) remove current from openset add current to closedset for each neighbor in neighbor_nodes(current) if neighbor in closedset continue tentative_g_score := g_score[current] + dist_between(current,neighbor) if neighbor not in openset or tentative_g_score <= g_score[neighbor] came_from[neighbor] := current g_score[neighbor] := tentative_g_score f_score[neighbor] := g_score[neighbor] + heuristic_cost_estimate(neighbor, goal) if neighbor not in openset add neighbor to openset return failure here is the pseudocode for wiki a* implementation......

  Read the article

• Is it possible to construct a cube with less than 24 vertices

  - by Telanor

  I have a cube-based world like minecraft and I'm wondering if there's a way to construct a cube with less than 24 vertices so I can reduce memory usage. It doesn't seem possible to me for 2 reasons: the normals wouldn't come out right and per-face textures wouldn't work. Is this the case or am I wrong? Maybe there's some fancy new dx11 tech that can help? Edit: Just to clarify, I have 2 requirements: I need surface normals for each cube face in order to do proper lighting and I need a way to address a different indexes in a texture array for each cube face

  Read the article

• proper way to creation multiple similiar buttons/panels

  - by JayAvon

  I have the below Code which i tried to do, but it only shows(the minus/plus button) on the last GirdLayout (Intelligence stat): JButton plusButton = new JButton("+"); JButton minusButton = new JButton("-"); statStrengthGridPanel = new JPanel(new GridLayout(1,3)); statStrengthGridPanel.add(minusButton); statStrengthGridPanel.add(new JLabel("10")); statStrengthGridPanel.add(plusButton); statConstitutionGridPanel = new JPanel(new GridLayout(1,3)); statConstitutionGridPanel.add(minusButton); statConstitutionGridPanel.add(new JLabel("10")); statConstitutionGridPanel.add(plusButton); statDexterityGridPanel = new JPanel(new GridLayout(1,3)); statDexterityGridPanel.add(minusButton); statDexterityGridPanel.add(new JLabel("10")); statDexterityGridPanel.add(plusButton); statIntelligenceGridPanel = new JPanel(new GridLayout(1,3)); statIntelligenceGridPanel.add(minusButton); statIntelligenceGridPanel.add(new JLabel("10")); statIntelligenceGridPanel.add(plusButton); I know I can do something like I did for the Panel names(have multiple ones), but I did not want to do that for the Panels in the first place. I am trying to use best practice and not have my code be repetitive. Any suggestions?? The goal is to have 4 stats, to assign points to, with decrement and increment buttons(I decided against sliders). Eventually I will have them have upper and lower limits, decrement the "unused" label, and all of that good stuff, but I just want to not be repetitive. Thanks for any help.

  Read the article

• Flickering problem with world matrix

  - by gnomgrol

  I do have a pretty wierd problem today. As soon as I try to change my translation- or rotationmatrix for an object to something else than (0,0,0), the object starts to flicker (scaling works fine). It rapid and randomly switches between the spot it should be in and a crippled something. I first thought that the problem would be z-fighting, but now Im pretty sure it isn't. I have now clue at all what it could be, here are two screenshots of the two states the plant is switching between. I already used PIX, but could find anything of use (Im not a very good debugger anyway) I would appreciate any help, thanks a lot! Important code: D3DXMatrixIdentity(&World); D3DXVECTOR3 rotaxisX = D3DXVECTOR3(1.0f, 0.0f, 0.0f); D3DXVECTOR3 rotaxisY = D3DXVECTOR3(0.0f, 1.0f, 0.0f); D3DXVECTOR3 rotaxisZ = D3DXVECTOR3(0.0f, 0.0f, 1.0f); D3DXMATRIX temprot1, temprot2, temprot3; D3DXMatrixRotationAxis(&temprot1, &rotaxisX, 0); D3DXMatrixRotationAxis(&temprot2, &rotaxisY, 0); D3DXMatrixRotationAxis(&temprot3, &rotaxisZ, 0); Rotation = temprot1 *temprot2 * temprot3; D3DXMatrixTranslation(&Translation, 0.0f, 10.0f, 0.0f); D3DXMatrixScaling(&Scale, 0.02f, 0.02f, 0.02f); //Set objs world space using the transformations World = Translation * Rotation * Scale; shader: cbuffer cbPerObject { matrix worldMatrix; matrix viewMatrix; matrix projectionMatrix; }; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; // Calculate the position of the vertex against the world, view, and projection matrices. output.position = mul(input.position, worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix);

  Read the article

• Adjusting the rate of movement of different objects on the same timer

  - by theUg

  I have a series of objects moving along the straight lines. I want to implement slight changes of velocity of each of the object. Constraint is existing model of animation. I am new to this, and not sure if it is the best way to accommodate varying speeds, but what do I know? It is a Java application that repaints the panel every time the timer expires. Timer is set via swing.Timer object that is set by timer delay constant. Every time the game is stepped objects’ coordinates advanced by an increment constant. Most of the objects are of the same class. Is there fairly easy way to refactor existing system to allow changing velocity for an individual object? Is there some obvious common solution I am not aware about? Idea I am having right now is to set timer delay fairly small, and only move objects every so many cycles of animation so that the apparent speed can be adjusted by varying how often they get moved. But that seems fairly involved, and I do not think it is the most elegant solution in terms of performance what with repainting the whole frame every 3-5 milliseconds. Can it be done by advancing the objects so many (varying) times during the certain interval (let’s say 35ms for something like 28fps), and use repaint() method to redraw just individual object? Do I need to mess with pausing animation for smoothness at higher redraw rates? Is it common practise to check for collision at larger step interval, but draw animation a lot more frequently?

  Read the article

• 3ds Max CAT to XNA

  - by user12214

  Has anyone successfully used the CAT bone system in 3ds Max and exported the file into XNA? If so, what was your method of doing so? There are a number of methods of doing this apparently, but the ones I've tried have not worked. I used the Panda Exporter which creates a .X file. This seems to be the latest way of going about this, but when it's loaded in XNA, there is an error saying something about the bone weights. This happens when I export with and without CAT bones.

  Read the article

• Need to make animation whereby the character shatters into a bunch of pieces

  - by theprojectabot

  I would like to take a 3d character model, cut out a bunch of shapes (or a bunch of triangles in the shape of the pieces I want) and then have the pieces separate from each other at the beginning of the animation and fall apart with gravity so it looks like the model is falling apart in shattered pieces. Is there a way to run a script on a mesh, cut out these pieces, instantiate all of them as separate models and then run gravity on them during the simulation?

  Read the article

• How should I organise classes for a space simulator?

  - by Peteyslatts

  I have pretty much taught myself everything I know about programming, so while I know how to teach myself (books, internet and reading API's), I'm finding that there hasn't been a whole lot in the way of good programming. I am finishing up learning the basics of XNA and I want to create a space simulator to test my knowledge. This isn't a full scale simulator, but just something that covers everything I learned. It's also going to be modular so I can build on it, after I get the basics down. One of the early features I want to implement is AI. And I want to take this into account as I'm designing my classes so I can minimize rewriting code. So my question: How should I design ship classes so that both the player and AI can use them? The only idea I have so far is: Create a ship class that contains stats, models, textures, collision data etc. The player and AI would then have the data for position, rotation, health, etc and would base their status off of the ship stats.

  Read the article

• Simple rendering produces minor stutter

  - by Ben

  For some reason, this game loop renders the movement of a simple rectangle with no stuttering. double currTime; double prevTime = System.nanoTime() / NANO_TO_SEC; double FPSTIMER = System.nanoTime(); double maxTimeDiff = 100.0 / 1000.0; double delta = 1.0 / 60.0; int processes = 0, frames = 0; while(true){ currTime = System.nanoTime() / NANO_TO_SEC; if(currTime - prevTime > maxTimeDiff) prevTime = currTime; if(currTime >= prevTime){ process(); processes++; prevTime += delta; if(currTime < prevTime){ render(); frames++; } } else{ try{ Thread.sleep((long) (1000 * (prevTime - currTime))); } catch(Exception e){} } if(System.nanoTime() - FPSTIMER > 1000000000.0){ System.out.println("Process: " + (1000 / processes) + "ms FPS: " + (1000 / frames) + "ms"); processes = frames = 0; FPSTIMER += 1000000000.0; } } But for this game loop, I get really minor stuttering where the movement does not look smooth. long prevTime = System.currentTimeMillis(); long prevRenderTime = 0; long currRenderTime = 0; long delta = 0; long msPerTick = 1000 / 60; int frames = 0; int ticks = 0; double FPSTIMER = System.currentTimeMillis(); while (true){ long currTime = System.currentTimeMillis(); delta += (currTime - prevTime) / msPerTick; prevTime = currTime; while (delta >= 1){ ticks++; process(); delta -= 1; } prevRenderTime = System.currentTimeMillis(); render(); frames++; currRenderTime = System.currentTimeMillis(); try{ Thread.sleep((long) ((1000 / FPS) - (currRenderTime - prevRenderTime))); } catch(Exception e){} if(System.currentTimeMillis() - FPSTIMER > 1000.0){ System.out.println("Process: " + (1000.0 / ticks) + "ms FPS: " + (1000.0 / frames) + "ms"); ticks = frames = 0; FPSTIMER += 1000.0; } Is there any critical difference that I'm missing here? The one thing I noticed is that if I uncap the fps for the second game loop, the stuttering goes away. It doesn't make sense to me. Also, the second game loop came from Notch's Minicraft code with just my thread sleeping code added in.

  Read the article

• Making efficeint voxel engines using "chunks"

  - by Wardy

  Concept I'm currently looking in to how voxel engines work with a view to possibly making one myself. I see a lot of stuff like this ... https://sites.google.com/site/letsmakeavoxelengine/home/chunks ... which talks about how to go about reducing the draw calls. What I can't seem to understand is how it actually saves draw call counts on the basis of the logic being something like this ... Without chunks foreach voxel in myvoxels DrawIfVisible() With Chunks foreach chunk in mychunks DrawIfVisible() which then does ... foreach voxel in myvoxels DrawIfVisible() So surely you saved nothing ?!?! You still make a draw call for each visible voxel do you not? A visible voxel needs a draw call in either scenario. The only real saving I can see is that the logic that evaluates a chunk will be able to determine if a large number of voxels are visible or not effectively saving a bit of "is this chunk visible" cpu time. But it's the draw calls that interest me ... The fewer of those, the faster the application. EDIT: In case it makes any difference I will probably be using XNA (DX not OpenGL) for my engine so don't consider my choice of example in the link above my choice of technology. But this question is such that I doubt it would matter.

  Read the article

• Arranging Gizmos in Unity 3D [on hold]

  - by Simran kaur

  I have this arrangement of Gizmos which was handed over to me. ! 1. How do I get it? I have read the documentation but I could get it as shown. I have basically track or lane that is coming towards the camera by moving towards negative z. I am moving lanes so that it appears as if cars are moving, The roads need to be rotated by 90 degrees otherwise they appear to move towards the upper end of the screen and that too parellely.Why exactly is that?

  Read the article

• How to get this wavefront .obj data onto the frustum?

  - by NoobScratcher

  I've finally figured out how to get the data from a .obj file and store the vertex positions x,y,z into a structure called Points with members x y z which are of type float. I want to know how to get this data onto the screen. Here is my attempt at doing so: //make a fileobject and store list and the index of that list in a c string ifstream file (list[index].c_str() ); std::vector<int>faces; std::vector<Point>points; points.push_back(Point()); Point p; int face[4]; while ( !file.eof() ) { char modelbuffer[10000]; //Get lines and store it in line string file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); cout << "Getting Vertex Positions" << endl; cout << "v" << p.x << endl; cout << "v" << p.y << endl; cout << "v" << p.z << endl; break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); cout << face[0] << endl; cout << face[1] << endl; cout << face[2] << endl; cout << face[3] << endl; faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } GLuint vertexbuffer; glGenBuffers(1, &vertexbuffer); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBufferData(GL_ARRAY_BUFFER, points.size(), points.data(), GL_STATIC_DRAW); //glBufferData(GL_ARRAY_BUFFER,sizeof(points), &(points[0]), GL_STATIC_DRAW); glVertexAttribPointer(0, 4, GL_FLOAT, GL_FALSE, 0, 0); glVertexPointer(3, GL_FLOAT, sizeof(points),points.data()); glIndexPointer(GL_DOUBLE, 0, faces.data()); glDrawArrays(GL_QUADS, 0, points.size()); glDrawElements(GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); } As you can see I've clearly failed the end part but I really don't know why its not rendering the data onto the frustum? Does anyone have a solution for this?

  Read the article

• Problems using easing equations in C# XNA

  - by codinghands

  I'm having some trouble using the easing equations suggested by Robert Penner for ActionScript (http://www.robertpenner.com/easing/, and a Flash demo here) in my C# XNA game. Firstly, what is the definition of the following variables passed in as arguments to each equation? float t, float b, float c, float d I'm currently calculating the new X position of a sprite in the Update() loop, however even for the linear tween equation I'm getting some odd results. I'm using the following values: float t = gameTime.TotalGameTime.TotalMilliseconds; float d = 8000f; float b = x.Position.X; float c = (ScreenManager.Game.GraphicsDevice.Viewport.Width >> 1) - (x.Position.X + x.frameSize.X / 2); And this equation for linear easing: float val = c*t/d + b;

  Read the article

• Bubble shooter search alghoritm

  - by Fofole

  So I have a Matrix of NxM. At a given position (for ex. [2][5]) I have a value which represents a color. If there is nothing at that point the value is -1. What I need to do is after I add a new point, to check all his neighbours with the same color value and if there are more than 2, set them all to -1. If what I said doesn't make sense what I'm trying to do is an alghoritm which I use to destroy all the same color bubbles from my screen, where the bubbles are memorized in a matrix where -1 means no bubble and {0,1,2,...} represent that there is a bubble with a specific color. This is what I tried and failed: public class Testing { static private int[][] gameMatrix= {{3, 3, 4, 1, 1, 2, 2, 2, 0, 0}, {1, 4, 1, 4, 2, 2, 1, 3, 0, 0}, {2, 2, 4, 4, 3, 1, 2, 4, 0, 0}, {0, 1, 2, 3, 4, 1, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, }; static int Rows=6; static int Cols=10; static int count; static boolean[][] visited=new boolean[15][15]; static int NOCOLOR = -1; static int color = 1; public static void dfs(int r, int c, int color, boolean set) { for(int dr = -1; dr <= 1; dr++) for(int dc = -1; dc <= 1; dc++) if(!(dr == 0 && dc == 0) && ok(r+dr, c+dc)) { int nr = r+dr; int nc = c+dc; // if it is the same color and we haven't visited this location before if(gameMatrix[nr][nc] == color && !visited[nr][nc]) { visited[nr][nc] = true; count++; dfs(nr, nc, color, set); if(set) { gameMatrix[nr][nc] = NOCOLOR; } } } } static boolean ok(int r, int c) { return r >= 0 && r < Rows && c >= 0 && c < Cols; } static void showMatrix(){ for(int i = 0; i < gameMatrix.length; i++) { System.out.print("["); for(int j = 0; j < gameMatrix[0].length; j++) { System.out.print(" " + gameMatrix[i][j]); } System.out.println(" ]"); } System.out.println(); } static void putValue(int value,int row,int col){ gameMatrix[row][col]=value; } public static void main(String[] args){ System.out.println("Initial Matrix:"); putValue(1, 4, 1); putValue(1, 5, 1); showMatrix(); for(int n = 0; n < 15; n++) for(int m = 0; m < 15; m++) visited[n][m] = false; //reset count count = 0; //dfs(bubbles.get(i).getRow(), bubbles.get(i).getCol(), color, false); // get the contiguous count dfs(5,1,color,false); //if there are more than 2 set the color to NOCOLOR for(int n = 0; n < 15; n++) for(int m = 0; m < 15; m++) visited[n][m] = false; if(count > 2) { //dfs(bubbles.get(i).getRow(), bubbles.get(i).getCol(), color, true); dfs(5,1,color,true); } System.out.println("Matrix after dfs:"); showMatrix(); } }

  Read the article

• Exporting UV coords from Blender

  - by Soapy

  So I have searched on google and various other websites but I've not found an answer. The only ones I did find did not work. So my question is how do I get UV coords from blender (2.63)? Currently I'm writing my own custom file exporter, and so far have managed to export vertices and their normals. Is there a way to export the UV coords? N.B. I'm currently try to figure it out using a simple cube that is unwrapped and has a texture applied to it.

  Read the article

• XNA - Am I screwing up the LoadContent for Texture2D?

  - by Bombcode

  I've read forum threads and questions and I done just about everything. I need to know what am I screwing up here. Here's the code in the constructor. Content.RootDirectory = "GameStateContent"; //Content.RootDirectory = "Content"; And this is in the LoadContent method menu = this.Content.Load<Texture2D>("mainmenu"); And here's the image screen shot of the folder structure. http://i.imgur.com/HnndE.png Any helps on this? Thanks.

  Read the article

• Turn Based Event Algorithm

  - by GamersIncoming

  I'm currently working on a small roguelike in XNA, which sees the player in a randomly generated series of dungeons fending off creeps, as you might expect. As with most roguelikes, the player makes a move, and then each of the creeps currently active on screen will make a move in turns, until all creeps have updated, and it return's to the player's go. On paper, the simple algorithm is straightforward: Player takes turn Turn Number increments For each active creep, update Position Once all active creeps have updated, allow player to take next turn However, when it comes to actually writing this in more detail, the concept becomes a bit more tricky for me. So my question comes as this: what is the best way to handle events taking turns to trigger, where the completion of each last event triggers the next, when dealing with a large number of creeps (probably stored as an array of an enemy object), and is there an easier way to create some kind of engine that just takes all objects that need updating and chains them together so their updates follow suit? I'm not asking for code, just algorithms and theory in the direction of objects triggering updates one after the other, in a turn based manner. Thanks in advance. Edited: Here's the code I currently have that is horrible :/ if (player.getTurnOver() && updateWait == 0) { if (creep[creepToUpdate].getActive()) { creep[creepToUpdate].moveObject(player, map1); updateWait = 10; } if (creepToUpdate < creep.Length -1) { creepToUpdate++; } else { creepToUpdate = 0; player.setTurnOver(false); } } if (updateWait > 0) { updateWait--; }

  Read the article

< Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >