Search Results

Search found 7371 results on 295 pages for 'raid card'.

Page 57/295 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Force RAID to read exiled disk?

  - by user198847

  user user197015 asked on 1th of November the following question: "We have a RAID 6 array (Infortrend EonStor DS S16F) that recently had two disks fail. Immediately prior to replacing these two disks, a third, good, disk was accidentally ejected from the array. After reinserting this disk it is marked as "exiled" by the array's firmware, and so even after replacing the two failed disks with new ones the array refuses to rebuild the logical volume and remains inaccessible. Since the temporarily-ejected disk is still functional and nothing has been written to the array since it was ejected, it seems that it should theoretically be possible to recover all the data on the array, but how can we convince the array to use the data from the "exiled" disk? Thanks for any help or advice you can offer." Now I've got quite the same problem. The post has been deleted by the user, so I don#t know if he was successful. Is there anybody who can help me? Thank you!

  Read the article

• RAID 5 heavy IO hard freezes Ubuntu: Why?

  - by Luke has no name

  I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the computer locked up. Did an identical dd to a JBOD partition on the same machine, and it didn't crash. Assuming a clean RAID5 partition, tri-core processor 2GB of ram, 6GB swap, what could be causing this?

  Read the article

• Hot-swapping drives

  - by user57770

  I have hot swap drives and controllers, but have never actually used the hot swap capability. What is the procedure for doing so? Do I need to warn Linux that I'm about to pull a drive out? Should I do anything after I put a drive back in? Does it make a difference whether the drive is part of a RAID set? The drives are generally RAIDed, but not always. Any RAID sets are managed by Linux, rather than the controller. The machines are running Fedora and CentOS.

  Read the article

• mirroing hard drives of different sizes

  - by user30472

  I have a dell server with two 18 gig drives in a Raid 1 config. I want to replace the drives with 400 gig drives. If I break the mirror and then remove one of the 18g drives, insert a 400g and create the mirror, then do the same process again with the other 400g drive, what will I have? I would like to think I would have a new 400g raid 1 drive. But I seem to remember that this process might result in only 18g of useable space on the 400g drives. Anyone know for sure? Thank

  Read the article

• Programming Technique: How to create a simple card game

  - by Shyam

  Hi, As I am learning the Ruby language, I am getting closer to actual programming. So I was thinking of creating a simple card game. My question isn't Ruby orientated, but I do know want to learn how to solve this problem with a genuine OOP approach. In my card game I want to have four players. Using a standard deck with 52 cards, no jokers/wildcards. In the game I won't use the Ace as a dual card, it is always the highest card. So, the programming problems I wonder about are the following: How can I sort/randomize the deck of cards? There are four types, each having 13 values. Eventually there can be only unique values, so picking random values could generate duplicates. How can I implement a simple AI? As there are tons of card games, someone would have figured this part out already, so references would be great. I am a truly Ruby nuby, and my goal here is to learn to solve problems, so pseudo code would be great, just to understand how to solve the problem programmatically. I apologize for my grammar and writing style if it's unclear, for it is not my native language. Also pointers to sites where such challenges are explained, would be a great resource! Thank you for your comments, answers and feedback!

  Read the article

• Card emulation via software NFC

  - by user85030

  After reading a lot of questions, i decided to post this one. I read that stock version of android does not support API's for card emulation. Also, we cannot write custom applications to secure element embedded in nfc controllers due to keys managed by google/samsung. I need to emulate a card (mifare or desfire etc). The option i can see is doing it via software. I have a ACR122U reader and i've tested that NFC P2P mode works fine with the Nexus-S that i have. 1) I came across a site that said that nexus s's NFC controller (pn532) can emulate a mifare 4k card. If this is true, can i write/read apdu commands to this emulated card? (Probably if i use a modded rom like cyanogenmod) 2) Can i write a android application that reads apdu commands sent from the reader and generate appropriate responses (if not fully, then upto some extent only). To do so, i searched that we need to patch nexus s with cynagenmod. Has someone tried emulating card via this method? I see that this is possible since we have products from access control companies offering mobile applications via which one can open doors e.g. http://www.assaabloy.com/en/com/Products/seos-mobile-access/

  Read the article

• CUDA driver installation on a laptop with nVidia NVS140M card

  - by stanigator

  I'm trying to first figure out if my computer contains a CUDA-enabled card. It has an nVidia NVS 140M card, but I can't seem to figure out if it is the 128 MB version or 256 MB version. On the laptop purchase receipt, I found out that I ordered the 128 MB version, but the control panel description of the card said otherwise as shown below: When I ran the CUDA driver from nVidia's site, it cannot find a hardware compatible with CUDA (even though the product series is CUDA-enabled, the card does not have 256 MB minimum of memory to do so). What would be your recommendations in this case with trying to use CUDA on this computer (I'm not sure if nothing can be done at this point)? Thanks in advance.

  Read the article

• Accessing smart card with Java

  - by Tom Brito

  I'm trying to learn about how does Java access smart cards, due to a project analysis. I wonder if there is any kind of virtual smart card which I could use to make some tests with Java? By the way, I've read about Java Card, and looks like it is used to run Java in cards, not to smart card data access, right?

  Read the article

• SD cards and CPRM protection

  - by Francesco Turco

  Before buying an SD memory card, I'd like to know something more about the CPRM protection, in particular: Does CPRM influence the way I am supposed to access my own data? That is, does CPRM encrypt it? Could CPRM prevent me from accessing my own data? Is it possible to disable or eliminate CPRM from either the memory card or the card reader? Are there manufacturers selling CPRM-free SD memory cards? Is there any real alternative to CPRM-protected SD memory cards beside USB flash drives? Is Linux support for SD cards good? Thanks.

  Read the article

• ASUS EAH4670 vs. ASUS EAH4670 V2 -- Whats the difference?

  - by roosteronacid

  I've been offered to buy a used ASUS EAH4670/DI/1GD3 graphics card. I went price-scouting to see if the offer I was given was fair, and I found out that there's a similar card, labelled ASUS EAH4670/DI/1GD3 V2. Question is; What's the difference? What's with the V2? What does it mean? Is it just a BIOS upgrade that I can do myself? Updated driver-software which I can download myself? Or is the card actually a better version--faster, more reliable (physical changes to the print), etc.?

  Read the article

• Cannot increase my screen resolution

  - by Patrick Beardmore

  I am trying to install my new monitor but my Graphics Adapter (Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family) does not offer a resolution of 1920x1080 in the [Display Properties Settings] window. It only offers up to 1360x768. Can anyone explain to me how I can increase this number to the correct resolution. The monitor does show my the windows desktop, albeit at a lower resolution which is being stretched to fill the screen, making it look very blurry. I have installed the "Monitor Drivers" I found on the disk supplied with new monitor, but these do not appear to have made any difference. The Intel software that comes with the graphics card has an information window containing lots of info about the card and the monitor itself. I have placed this on a webpage so you can examine it if helpful. Many thanks with your help in getting my Christmas present to work! Patrick P.S.: Before I got this screen I checked to see if my graphics card could cope with such a large screen.

  Read the article

• Using 4 monitors with 2 generic video cards... possible?

  - by Ikram

  I'm thinking of setting up 4 monitors in a grid, using two video cards, one card to feed each pair of monitors through the card's two DVI ports. The most important requirement for me is to have the grid of monitors act as one single huge screen. Is this scenario possible by using two generic cards like Radeon 4870s on a Windows 7 computer? (I've heard of Eyefinity, but 4870s don't have it) Another issue is that I only have one PCI-Express slot on my computer's motherboard, therefore I'll need to use one of the lesser PCI cards as the second video card. Will this pose problems?

  Read the article

• Still no external sound after installing ubuntu 10.04

  - by Walter

  As suggested I upgraded. Same as before except now not even the speaker control in the application bar. Please help. Background: I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System Administration Hardware Drivers; the only driver listed is my graphics card. Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.

  Read the article

• How to prevent HP Photosmart Essential from launching on removal drive insertion

  - by David Boike

  My in-laws bought an HP computer loaded with HP junk, and it's giving me a headache. When they insert a camera memory card into their printer, the Auto-Play dialog comes up, but it also launches the HP Photosmart Essential application, which is a piece of trash. It will NOT launch properly just normally from the taskbar, so that makes it pretty useless. I tried uninstalling it, but then when you insert a memory card, a Microsoft Help window comes up saying how to reinstall HP Photosmart Essential!! Is there any way to find the registry key (I assume) that allows a program to be launched when a memory card is inserted?

  Read the article

• Why can't I record 16khz sampling audio using my laptop?

  - by KayKay

  I want to know why my laptop can't record 16khz sampling audio. The sampling rates I can have using my laptop are higher than 16khz. e.g, 44khz, 48khz, 192khz, and so on... I need to record 16khz sampling audio using my laptop. Sound card in my laptop is Conexant 20671 SmartAudio HD Although I can record 16khz sampling by Sound Forge 8.0, I am doubt whether the recorded audio is really 16khz sampling or not. Because the sound card can't record 16khz sampling, I think there may be some problems on the recording process. Could you give me any hint why the sound card can't record 16khz? and any method to identify whether the recorded audio by Sound Forge 8.0 is really 16khz? Thanks.

  Read the article

• Dying SanDisk Memory Stick Pro Duo

  - by Different55

  I have a Memory Stick Pro Duo and after attempting to delete the largest file from a Mac the stick has become unusable. I can almost access it. When I put it in my PC I can open/delete/copy/paste/rename/modify one file/folder, then it can't detect the card. If I reinsert the card I can move on to the next file, but this is really annoying and my PSP won't read it at all. The memory card access light will flash for a really long time before it says that every file is corrupted. When I have tried to format it with either the PC, PSP, or a camera that uses a memory stick pro duo, it fails. I've tried with all the different options on windows, I tried formatting it through CMD, but nothing I have tried works. Should I copy every file off one by one or is there a way to fix it?

  Read the article

• I need an other videocard to replace my ATI HD 5870 which one is good? [closed]

  - by Chris

  At this moment I have a ATI HD 5870 iCooler 5 and I game a lot. I want to replace the card for another, I don't have room in my case to add another 5870. I mainly play games like Battlefield 3, but I can't play this game on Ultra high, for me is this pretty important. So here are my questions: Price is not an issue because computers are a big hobby to me and hobbies cost money :-) Can anyone recommend me a better card, ATI or Nvidia does not mather to me. Why is this card better?

  Read the article

• GeForce GT 430 with 1 VGA port and 1 HDMI port can support dual monitor?

  - by Tendou Kishi

  This question is similar to 3 Monitors, 1 graphics card but with different video card. It has the same ports as GT 120 in that question. Would it support dual monitor? I don't need 3 monitors. Just 2 is good. Checked GeForce GT 430 Specs but have no idea whether it will support or not. While on it, can somebody explain how to know whether a graphics card support multiple display from such information?

  Read the article

• what are the rules for SLI ( GTX 550 Ti )

  - by equivalent8

  I got ASUS GTX 550 Ti and I want to SLI it with another graphic card. I heard that not all graphic cards are good idea to SLI, (or not all combinations) because sometimes the final performance could be even worse that with one graphic card. Is that true? What are the rules ? ( maybe chip-set needs to be same or something ? ) I was wondering if you can recommend me what Graphic card should I use as with mine. Should I use same one (GTX 550 Ti) ?

  Read the article

• Low end dedicated GPU vs. integrated Intel graphics (for light CAD work)

  - by PaulJ

  I have been asked to spec a PC for an interior design business. They are going to do some AutoCAD work (but they won't be using massive datasets or anything), and also use Kitchen Draw, a program that has 3D visualization features and says, in its requirements, that "a recent NVidia or ATI card might be enough". Since they are very limited budget-wise, I had originally picked a GeForce GT 610 card, but this card is so low end that I'm left wondering whether it will be an improvement at all over the dedicated Intel HD2500 graphics chip that comes with the CPU (I will be using an Ivy-Bridge Intel i5). Most of the information I see around is for gaming, which isn't really relevant in my case. Basically, for the use case I've described (light 3D work), can one get away with a current Intel HD graphics chipset? And will a low end GPU like the GT 610 provide a noticeable improvement?

  Read the article

• What components should I upgrade to squeeze more life of my pc? [on hold]

  - by Jared

  Hi my current specs are CPU: Intel Core i5 750 2.66 GHz, Socket 1156 Motherboard: Asus P7P55 LX Motherboard, Socket 1156, 4xDIMM DDR3, 2xPCIe-16, 3xPCI, 2xPCIe-1, 14xUSB2, Audio, 1xATA, 6xSATA, RAID, ATX HDD: Seagate Barracuda 7200.11 ST31500341AS Hard Disk Drive, 1500GB, 7200rpm, 32MB Cache, SATA-2 RAM: G.Skill Ripjaw F3-12800CL8D-4GBRM, 2x2GB, DDR3-1600, PC3-12800, CL8, DIMM Video: MSI Radeon 5850 R5850-PM2D1G Video Card, 1024MB, DDR5, PCIe-16, DVI, CrossFire, HDMI PSU: Vantec ION2, 620W ATX PSU, SLI Ready, Black Firstly I know it badly needs an SSD, for which I'm thinking of the Samsung 250gb 840 EVO series. The ram could do with another 4GB, for which I am thinking of replacing the 2x2GB for 2x4GB of the same type. My video card is struggling with the latest releases, so vitally should I ditch the video card and go for something newer (ATI 7850, GTX 660?) or try and get another 5850 for crossfire support? Bearing in mind 5850's are sort of hard to come buy now as they are not stocked in shops usually, which means they have to be bought second hand.

  Read the article

• high load average, high wait, dmesg raid error messages (debian nfs server)

  - by John Stumbles

  Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

  Read the article

• raid 1 and high load average

  - by melocoton

  i have a server with high load average, I think the problem is the raid 1. cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb1[1] sda1[0] 256896 blocks [2/2] [UU] md3 : active raid1 sdb3[1] sda3[0] 2562240 blocks [2/2] [UU] md4 : active raid1 sdb5[1] sda5[0] 958566272 blocks [2/2] [UU] md1 : active raid1 sdb2[1] sda2[0] 15366080 blocks [2/2] [UU] model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Linux 2.6.18-164.6.1.el5.centos.plus (local) 04/19/2010 avg-cpu: %user %nice %system %iowait %steal %idle 17.37 0.01 6.02 26.17 0.00 50.43 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 61.09 562.65 893.73 1557214 2473546 sda1 0.01 0.27 0.02 751 42 sda2 6.11 195.50 169.78 541075 469888 sda3 0.01 0.23 0.00 641 0 sda4 0.00 0.01 0.00 18 0 sda5 54.96 366.54 723.94 1014449 2003616 sdb 54.40 433.22 893.73 1199015 2473546 sdb1 0.01 0.16 0.02 436 42 sdb2 5.31 169.00 169.78 467729 469888 sdb3 0.01 0.31 0.00 865 0 sdb4 0.00 0.00 0.00 10 0 sdb5 49.05 263.65 723.94 729695 2003616 md1 29.96 364.39 166.68 1008498 461312 md4 124.15 630.07 713.28 1743822 1974112 md3 0.05 0.43 0.00 1192 0 md0 0.04 0.32 0.00 872 10 dm-0 7.96 83.29 23.02 230530 63720 dm-1 3.67 51.81 2.73 143394 7560 dm-2 7.63 67.76 27.35 187546 75696 dm-3 8.20 134.60 14.02 372514 38792 dm-4 5.90 10.66 39.35 29498 108912 dm-5 17.39 24.52 121.79 67850 337080 dm-6 27.19 229.60 139.89 635442 387168 dm-7 0.14 1.07 0.28 2970 776 dm-8 25.84 4.23 202.89 11698 561536 dm-9 14.77 8.38 112.35 23202 310960 dm-10 5.29 12.78 29.55 35376 81784 dm-11 0.16 1.25 0.05 3450 128 the server runs lvm in the md4

  Read the article

• How ZFS handles online replacement in a RAID-Z (theoretical)

  - by Kevin

  This is a somewhat theoretical question about ZFS and RAID-Z. I'll use a three disk single-parity array as an example for clarity, but the problem can be extended to any number of disks and any parity. Suppose we have disks A, B, and C in the pool, and that it is clean. Suppose now that we physically add disk D with the intention of replacing disk C, and that disk C is still functioning correctly and is only being replaced out of preventive maintenance. Some admins might just yank C and install D, which is a little more organized as devices need not change IDs - however this does leave the array degraded temporarily and so for this example suppose we install D without offlining or removing C. Solaris docs indicate that we can replace a disk without first offlining it, using a command such as: zpool replace pool C D This should cause a resilvering onto D. Let us say that resilvering proceeds "downwards" along a "cursor." (I don't know the actual terminology used in the internal implementation.) Suppose now that midways through the resilvering, disk A fails. In theory, this should be recoverable, as above the cursor B and D contain sufficient parity and below the cursor B and C contain sufficient parity. However, whether or not this is actually recoverable depnds upon internal design decisions in ZFS which I am not aware of (and which the manual doesn't say in certain terms). If ZFS continues to send writes to C below the cursor, then we are fine. If, however, ZFS internally treats C as though it were gone, resilvering D only from parity between A and B and only writing A and B below the cursor, then we're toast. Some experimenting could answer this question but I was hoping maybe someone on here already knows which way ZFS handles this situation. Thank you in advance for any insight!

  Read the article

• Rotate monitor to portrait on Windows Server 2003 with ATI card

  - by Eli

  Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >