Search Results

Search found 3141 results on 126 pages for 'zero'.

Page 57/126 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• codility challenge, test case OK , Evaluation report Wrong Answer

  - by Hussein Fawzy

  the aluminium 2014 gives me wrong answer [3 , 9 , -6 , 7 ,-3 , 9 , -6 , -10] got 25 expected 28 but when i repeated the challenge with the same code and make case test it gives me the correct answer Your test case [3, 9, -6, 7, -3, 9, -6, -10] : NO RUNTIME ERRORS (returned value: 28) what is the wrong with it ??? the challenge :- A non-empty zero-indexed array A consisting of N integers is given. A pair of integers (P, Q), such that 0 = P = Q < N, is called a slice of array A. The sum of a slice (P, Q) is the total of A[P] + A[P+1] + ... + A[Q]. The maximum sum is the maximum sum of any slice of A. For example, consider array A such that: A[0] = 3 A[1] = 2 A[2] = -6 A[3] = 3 A[4] = 1 For example (0, 1) is a slice of A that has sum A[0] + A[1] = 5. This is the maximum sum of A. You can perform a single swap operation in array A. This operation takes two indices I and J, such that 0 = I = J < N, and exchanges the values of A[I] and A[J]. To goal is to find the maximum sum you can achieve after performing a single swap. For example, after swapping elements 2 and 4, you will get the following array A: A[0] = 3 A[1] = 2 A[2] = 1 A[3] = 3 A[4] = -6 After that, (0, 3) is a slice of A that has the sum A[0] + A[1] + A[2] + A[3] = 9. This is the maximum sum of A after a single swap. Write a function: class Solution { public int solution(int[] A); } that, given a non-empty zero-indexed array A of N integers, returns the maximum sum of any slice of A after a single swap operation. For example, given: A[0] = 3 A[1] = 2 A[2] = -6 A[3] = 3 A[4] = 1 the function should return 9, as explained above. and my code is :- import java.math.*; class Solution { public int solution(int[] A) { if(A.length == 1) return A[0]; else if (A.length==2) return A[0]+A[1]; else{ int finalMaxSum = A[0]; for (int l=0 ; l<A.length ; l++){ for (int k = l+1 ; k<A.length ; k++ ){ int [] newA = A; int temp = newA[l]; newA [l] = newA[k]; newA[k]=temp; int maxSum = newA[0]; int current_max = newA[0]; for(int i = 1; i < newA.length; i++) { current_max = Math.max(A[i], current_max + newA[i]); maxSum = Math.max(maxSum, current_max); } finalMaxSum = Math.max(finalMaxSum , maxSum); } } return finalMaxSum; } } } i don't know what's the wrong with it ??

  Read the article

• OpenGL/SharpGL - Points only on -near surface of Ortho projection?

  - by FTLPhysicsGuy

  When you create points using three dimensions for each point and you use an Ortho projection to view the points, would there be a reason that only the points on the -near surface would appear? For example, if you use (the SharpGL method) gl.Ortho(0, width, height, 0, -10, 10), only the points at z=10 (because the near surface is at -10) actually show up. I'm currently using SharpGL - but I'm hoping the issue I'm having isn't with that particular implementation/library. EDIT: I'm adding the code below that demonstrates the issue. Note that this example requires SharpGL and is in fact a modification of a WPF sample project that comes with the current SharpGL source code (the original sample project is called TwoDSample). The project requires a MainWindow.xaml and a MainWindow.xaml.cs. Here's the xaml: <Window x:Class="TwoDSample.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525" xmlns:my="clr-namespace:SharpGL.WPF;assembly=SharpGL.WPF"> <Grid> <my:OpenGLControl Name="openGLControl1" OpenGLDraw="openGLControl1_OpenGLDraw" OpenGLInitialized="openGLControl1_OpenGLInitialized" Resized="openGLControl1_Resized"/> </Grid> </Window> Here is the code behind: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using SharpGL.Enumerations; namespace TwoDSample { /// <summary> /// Interaction logic for MainWindow.xaml /// </summary> public partial class MainWindow : Window { public MainWindow() { InitializeComponent(); } // NOTE: I use this to restrict the openGLControl1_OpenGLDraw method to // drawing only once after m_drawCount is set to zero; int m_drawCount = 0; private void openGLControl1_OpenGLDraw(object sender, SharpGL.SceneGraph.OpenGLEventArgs args) { // NOTE: Only draw once after m_drawCount is set to zero if (m_drawCount < 1) { // Get the OpenGL instance. var gl = args.OpenGL; gl.Color(1f, 0f, 0f); gl.PointSize(2.0f); // Draw 10000 random points. gl.Begin(BeginMode.Points); Random random = new Random(); for (int i = 0; i < 10000; i++) { double x = 10 + 400 * random.NextDouble(); double y = 10 + 400 * random.NextDouble(); double z = (double)random.Next(-10, 0); // Color the point according to z value gl.Color(0f, 0f, 1f); // default to blue if (z == -10) gl.Color(1f, 0f, 0f); // Red for z = -10 else if (z == -1) gl.Color(0f, 1f, 0f); // Green for z = -1 gl.Vertex(x, y, z); } gl.End(); m_drawCount++; } } private void openGLControl1_OpenGLInitialized(object sender, SharpGL.SceneGraph.OpenGLEventArgs args) { } private void openGLControl1_Resized(object sender, SharpGL.SceneGraph.OpenGLEventArgs args) { // NOTE: force the draw routine to happen again when resize occurs m_drawCount = 0; // Get the OpenGL instance. var gl = args.OpenGL; // Create an orthographic projection. gl.MatrixMode(MatrixMode.Projection); gl.LoadIdentity(); // NOTE: Basically no matter what I do, the only points I see are those at // the "near" surface (with z = -zNear)--in this case, I only see green points gl.Ortho(0, openGLControl1.ActualWidth, openGLControl1.ActualHeight, 0, 1, 10); // Back to the modelview. gl.MatrixMode(MatrixMode.Modelview); } } }

  Read the article

• Game loop and time tracking

  - by David Brown

  Maybe I'm just an idiot, but I've been trying to implement a game loop all day and it's just not clicking. I've read literally every article I could find on Google, but the problem is that they all use different timing mechanisms, which makes them difficult to apply to my particular situation (some use milliseconds, other use ticks, etc). Basically, I have a Clock object that updates each time the game loop executes. internal class Clock { public static long Timestamp { get { return Stopwatch.GetTimestamp(); } } public static long Frequency { get { return Stopwatch.Frequency; } } private long _startTime; private long _lastTime; private TimeSpan _totalTime; private TimeSpan _elapsedTime; /// <summary> /// The amount of time that has passed since the first step. /// </summary> public TimeSpan TotalTime { get { return _totalTime; } } /// <summary> /// The amount of time that has passed since the last step. /// </summary> public TimeSpan ElapsedTime { get { return _elapsedTime; } } public Clock() { Reset(); } public void Reset() { _startTime = Timestamp; _lastTime = 0; _totalTime = TimeSpan.Zero; _elapsedTime = TimeSpan.Zero; } public void Tick() { long currentTime = Timestamp; if (_lastTime == 0) _lastTime = currentTime; _totalTime = TimestampToTimeSpan(currentTime - _startTime); _elapsedTime = TimestampToTimeSpan(currentTime - _lastTime); _lastTime = currentTime; } public static TimeSpan TimestampToTimeSpan(long timestamp) { return TimeSpan.FromTicks( (timestamp * TimeSpan.TicksPerSecond) / Frequency); } } I based most of that on the XNA GameClock, but it's greatly simplified. Then, I have a Time class which holds various times that the Update and Draw methods need to know. public class Time { public TimeSpan ElapsedVirtualTime { get; internal set; } public TimeSpan ElapsedRealTime { get; internal set; } public TimeSpan TotalVirtualTime { get; internal set; } public TimeSpan TotalRealTime { get; internal set; } internal Time() { } internal Time(TimeSpan elapsedVirtualTime, TimeSpan elapsedRealTime, TimeSpan totalVirutalTime, TimeSpan totalRealTime) { ElapsedVirtualTime = elapsedVirtualTime; ElapsedRealTime = elapsedRealTime; TotalVirtualTime = totalVirutalTime; TotalRealTime = totalRealTime; } } My main class keeps a single instance of Time, which it should constantly update during the game loop. So far, I have this: private static void Loop() { do { Clock.Tick(); Time.TotalRealTime = Clock.TotalTime; Time.ElapsedRealTime = Clock.ElapsedTime; InternalUpdate(Time); InternalDraw(Time); } while (!_exitRequested); } The real time properties of the time class turn out great. Now I'd like to get a proper update/draw loop working so that the state is updated a variable number of times per frame, but at a fixed timestep. At the same time, the Time.TotalVirtualTime and Time.ElapsedVirtualTime should be updated accordingly. In addition, I intend for this to support multiplayer in the future, in case that makes any difference to the design of the game loop. Any tips or examples on how I could go about implementing this (aside from links to articles)?

  Read the article

• Samplegrabber works fine on AVI/MPEG files but choppy with WMV

  - by jomtois

  I have been using the latest version of the WPFMediaKit. What I am trying to do is write a sample application that will use the Samplegrabber to capture the video frames of video files so I can have them as individual Bitmaps. So far, I have had good luck with the following code when constructing and rendering my graph. However, when I use this code to play back a .wmv video file, when the samplegrabber is attached, it will play back jumpy or choppy. If I comment out the line where I add the samplegrabber filter, it works fine. Again, it works with the samplegrabber correctly with AVI/MPEG, etc. protected virtual void OpenSource() { FrameCount = 0; /* Make sure we clean up any remaining mess */ FreeResources(); if (m_sourceUri == null) return; string fileSource = m_sourceUri.OriginalString; if (string.IsNullOrEmpty(fileSource)) return; try { /* Creates the GraphBuilder COM object */ m_graph = new FilterGraphNoThread() as IGraphBuilder; if (m_graph == null) throw new Exception("Could not create a graph"); /* Add our prefered audio renderer */ InsertAudioRenderer(AudioRenderer); var filterGraph = m_graph as IFilterGraph2; if (filterGraph == null) throw new Exception("Could not QueryInterface for the IFilterGraph2"); IBaseFilter renderer = CreateVideoMixingRenderer9(m_graph, 1); IBaseFilter sourceFilter; /* Have DirectShow find the correct source filter for the Uri */ var hr = filterGraph.AddSourceFilter(fileSource, fileSource, out sourceFilter); DsError.ThrowExceptionForHR(hr); /* We will want to enum all the pins on the source filter */ IEnumPins pinEnum; hr = sourceFilter.EnumPins(out pinEnum); DsError.ThrowExceptionForHR(hr); IntPtr fetched = IntPtr.Zero; IPin[] pins = { null }; /* Counter for how many pins successfully rendered */ int pinsRendered = 0; m_sampleGrabber = (ISampleGrabber)new SampleGrabber(); SetupSampleGrabber(m_sampleGrabber); hr = m_graph.AddFilter(m_sampleGrabber as IBaseFilter, "SampleGrabber"); DsError.ThrowExceptionForHR(hr); /* Loop over each pin of the source filter */ while (pinEnum.Next(pins.Length, pins, fetched) == 0) { if (filterGraph.RenderEx(pins[0], AMRenderExFlags.RenderToExistingRenderers, IntPtr.Zero) >= 0) pinsRendered++; Marshal.ReleaseComObject(pins[0]); } Marshal.ReleaseComObject(pinEnum); Marshal.ReleaseComObject(sourceFilter); if (pinsRendered == 0) throw new Exception("Could not render any streams from the source Uri"); /* Configure the graph in the base class */ SetupFilterGraph(m_graph); HasVideo = true; /* Sets the NaturalVideoWidth/Height */ //SetNativePixelSizes(renderer); } catch (Exception ex) { /* This exection will happen usually if the media does * not exist or could not open due to not having the * proper filters installed */ FreeResources(); /* Fire our failed event */ InvokeMediaFailed(new MediaFailedEventArgs(ex.Message, ex)); } InvokeMediaOpened(); } And: private void SetupSampleGrabber(ISampleGrabber sampleGrabber) { FrameCount = 0; var mediaType = new AMMediaType { majorType = MediaType.Video, subType = MediaSubType.RGB24, formatType = FormatType.VideoInfo }; int hr = sampleGrabber.SetMediaType(mediaType); DsUtils.FreeAMMediaType(mediaType); DsError.ThrowExceptionForHR(hr); hr = sampleGrabber.SetCallback(this, 0); DsError.ThrowExceptionForHR(hr); } I have read a few things saying the the .wmv or .asf formats are asynchronous or something. I have attempted inserting a WMAsfReader to decode which works, but once it goes to the VMR9 it gives the same behavior. Also, I have gotten it to work correctly when I comment out the IBaseFilter renderer = CreateVideoMixingRenderer9(m_graph, 1); line and have filterGraph.Render(pins[0]); -- the only drawback is that now it renders in an Activemovie widow of its own instead of my control, however the samplegrabber functions correctly and without any skipping. So I am thinking the bug is in the VMR9 / samplegrabbing somewhere. Any help? I am new to this.

  Read the article

• Asp.net mvc, view with multiple updatable parts - how?

  - by DerDres

  I have started doing asp.net mvc programming and like it more everyday. Most of the examples I have seen use separate views for viewing and editing details of a specific entity. E.g. - table of music albums linking to separate 'detail' and 'update' views [Action] | Title | Artist detail, update | Uuuh Baby | Barry White detail, update | Mr Mojo | Barry White With mvc how can I achieve a design where the R and the U (CRUD) are represented in a single view, and furthermore where the user can edit separate parts of the view, thus limiting the amount of data the user can edit before saving? Example mockup - editing album detials: I have achieved such a design with ajax calls, but Im curious how to do this without ajax. Parts of my own take on this can be seen below. I use a flag (enum EditCode) indicating which part of the view, if any, that has to render a form. Is such a design in accordance with the framework, could it be done more elegantly? AlbumController public class AlbumController : Controller { public ActionResult Index() { var albumDetails = from ManageVM in state.AlbumState.ToList() select ManageVM.Value.Detail; return View(albumDetails); } public ActionResult Manage(int albumId, EditCode editCode) { (state.AlbumState[albumId] as ManageVM).EditCode = (EditCode)editCode; ViewData["albumId"] = albumId; return View(state.AlbumState[albumId]); } [HttpGet] public ActionResult Edit(int albumId, EditCode editCode) { return RedirectToAction("Manage", new { albumId = albumId, editCode = editCode }); } // edit album details [HttpPost] public ActionResult EditDetail(int albumId, Detail details) { (state.AlbumState[albumId] as ManageVM).Detail = details; return RedirectToAction("Manage", new { albumId = albumId, editCode = EditCode.NoEdit });// zero being standard } // edit album thought [HttpPost] public ActionResult EditThoughts(int albumId, List<Thought> thoughts) { (state.AlbumState[albumId] as ManageVM).Thoughts = thoughts; return RedirectToAction("Manage", new { albumId = albumId, editCode = EditCode.NoEdit });// zero being standard } Flag - EditCode public enum EditCode { NoEdit, Details, Genres, Thoughts } Mangae view <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<MvcApplication1.Controllers.ManageVM>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Manage </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>Manage</h2> <% if(Model.EditCode == MvcApplication1.Controllers.EditCode.Details) {%> <% Html.RenderPartial("_EditDetails", Model.Detail); %> <% }else{%> <% Html.RenderPartial("_ShowDetails", Model.Detail); %> <% } %> <hr /> <% if(Model.EditCode == MvcApplication1.Controllers.EditCode.Thoughts) {%> <% Html.RenderPartial("_EditThoughts", Model.Thoughts); %> <% }else{%> <% Html.RenderPartial("_ShowThoughts", Model.Thoughts); %> <% } %>

  Read the article

• How do I go about overloading C++ operators to allow for chaining?

  - by fneep

  I, like so many programmers before me, am tearing my hair out writing the right-of-passage-matrix-class-in-C++. I have never done very serious operator overloading and this is causing issues. Essentially, by stepping through This is what I call to cause the problems. cMatrix Kev = CT::cMatrix::GetUnitMatrix(4, true); Kev *= 4.0f; cMatrix Baz = Kev; Kev = Kev+Baz; //HERE! What seems to be happening according to the debugger is that Kev and Baz are added but then the value is lost and when it comes to reassigning to Kev, the memory is just its default dodgy values. How do I overload my operators to allow for this statement? My (stripped down) code is below. //header class cMatrix { private: float* _internal; UInt32 _r; UInt32 _c; bool _zeroindexed; //fast, assumes zero index, no safety checks float cMatrix::_getelement(UInt32 r, UInt32 c) { return _internal[(r*this->_c)+c]; } void cMatrix::_setelement(UInt32 r, UInt32 c, float Value) { _internal[(r*this->_c)+c] = Value; } public: cMatrix(UInt32 r, UInt32 c, bool IsZeroIndexed); cMatrix( cMatrix& m); ~cMatrix(void); //operators cMatrix& operator + (cMatrix m); cMatrix& operator += (cMatrix m); cMatrix& operator = (const cMatrix &m); }; //stripped source file cMatrix::cMatrix(cMatrix& m) { _r = m._r; _c = m._c; _zeroindexed = m._zeroindexed; _internal = new float[_r*_c]; UInt32 size = GetElementCount(); for (UInt32 i = 0; i < size; i++) { _internal[i] = m._internal[i]; } } cMatrix::~cMatrix(void) { delete[] _internal; } cMatrix& cMatrix::operator+(cMatrix m) { return cMatrix(*this) += m; } cMatrix& cMatrix::operator*(float f) { return cMatrix(*this) *= f; } cMatrix& cMatrix::operator*=(float f) { UInt32 size = GetElementCount(); for (UInt32 i = 0; i < size; i++) { _internal[i] *= f; } return *this; } cMatrix& cMatrix::operator+=(cMatrix m) { if (_c != m._c || _r != m._r) { throw new cCTException("Cannot add two matrix classes of different sizes."); } if (!(_zeroindexed && m._zeroindexed)) { throw new cCTException("Zero-Indexed mismatch."); } for (UInt32 row = 0; row < _r; row++) { for (UInt32 column = 0; column < _c; column++) { float Current = _getelement(row, column) + m._getelement(row, column); _setelement(row, column, Current); } } return *this; } cMatrix& cMatrix::operator=(const cMatrix &m) { if (this != &m) { _r = m._r; _c = m._c; _zeroindexed = m._zeroindexed; delete[] _internal; _internal = new float[_r*_c]; UInt32 size = GetElementCount(); for (UInt32 i = 0; i < size; i++) { _internal[i] = m._internal[i]; } } return *this; }

  Read the article

• Simple XML variable returns "0"

  - by Warren Haskins

  Ok, so im working with tumblr's API and im using SimpleXMLElement with php and ive run into a problem. Basically, when I call on a variable it just prints a zero. for instance : <?php echo $data->posts->post[0]->photo-url[5]; ?> This just breaks the page, and when I leave out the [5] it just prints zero I want to echo the photo-url with the number [5] but I cant get my head around this and its killing me. I just dont understand why it wont work. Heres a sample of the simpleXMLElement print-out : SimpleXMLElement Object ( [@attributes] = Array ( [version] = 1.0 ) [posts] => SimpleXMLElement Object ( [@attributes] => Array ( [type] => photo ) [post] => Array ( [0] => SimpleXMLElement Object ( [@attributes] => Array ( [id] => 574166180 [url] => http://young-n-reckless.tumblr.com/post/574166180 [url-with-slug] => http://young-n-reckless.tumblr.com/post/574166180 [type] => photo [date-gmt] => 2010-05-05 19:52:46 GMT [date] => Wed, 05 May 2010 15:52:46 [unix-timestamp] => 1273089166 [format] => html [reblog-key] => vc9EfT7d [slug] => [tumblelog] => young-n-reckless [bookmarklet] => true ) [tumblelog] => SimpleXMLElement Object ( [@attributes] => Array ( [title] => Young & Reckless [name] => young-n-reckless [url] => http://young-n-reckless.tumblr.com/ [timezone] => US/Eastern [avatar-url-16] => http://24.media.tumblr.com/avatar_424f776dd55c_16.png [avatar-url-24] => http://24.media.tumblr.com/avatar_424f776dd55c_24.png [avatar-url-30] => http://24.media.tumblr.com/avatar_424f776dd55c_30.png [avatar-url-40] => http://25.media.tumblr.com/avatar_424f776dd55c_40.png [avatar-url-48] => http://24.media.tumblr.com/avatar_424f776dd55c_48.png [avatar-url-64] => http://26.media.tumblr.com/avatar_424f776dd55c_64.png [avatar-url-96] => http://25.media.tumblr.com/avatar_424f776dd55c_96.png [avatar-url-128] => http://24.media.tumblr.com/avatar_424f776dd55c_128.png [avatar-url-512] => http://29.media.tumblr.com/avatar_424f776dd55c_512.png ) ) [photo-link-url] => http://www.flickr.com/photos/katiemabey/3429588812/ [photo-url] => Array ( [0] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [1] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [2] => http://25.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_400.jpg [3] => http://28.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_250.jpg [4] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_100.jpg [5] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_75sq.jpg ) ) Any help would be greatly appreciated, and thanks in advance. Warren

  Read the article

• How can I properly implement inetcpl.cpl as an external dll?

  - by Kyt

  I have the following 2 sets of code, both of which produce the same results: using System.Linq; using System.Runtime.InteropServices; using System.Text; using System.Threading.Tasks; using System.Windows.Forms; namespace ResetIE { class Program { [DllImport("InetCpl.cpl", SetLastError=true, CharSet=CharSet.Unicode, EntryPoint="ClearMyTracksByProcessW")] public static extern long ClearMyTracksByProcess(IntPtr hwnd, IntPtr hinst, ref TargetHistory lpszCmdLine, FormWindowState nCmdShow); static void Main(string[] args) { TargetHistory th = TargetHistory.CLEAR_TEMPORARY_INTERNET_FILES; ClearMyTracksByProcessW(Process.GetCurrentProcess().Handle, Marshal.GetHINSTANCE(typeof(Program).Module), ref th, FormWindowState.Maximized); Console.WriteLine("Done."); } } and ... static class NativeMethods { [DllImport("kernel32.dll")] public static extern IntPtr LoadLibrary(string dllToLoad); [DllImport("kernel32.dll")] public static extern IntPtr GetProcAddress(IntPtr hModule, string procedureName); [DllImport("kernel32.dll")] public static extern bool FreeLibrary(IntPtr hModule); } public class CallExternalDLL { [UnmanagedFunctionPointer(CallingConvention.Cdecl)] public delegate long ClearMyTracksByProcessW(IntPtr hwnd, IntPtr hinst, ref TargetHistory lpszCmdLine, FormWindowState nCmdShow); public static void Clear_IE_Cache() { IntPtr pDll = NativeMethods.LoadLibrary(@"C:\Windows\System32\inetcpl.cpl"); if (pDll == IntPtr.Zero) { Console.WriteLine("An Error has Occurred."); } IntPtr pAddressOfFunctionToCall = NativeMethods.GetProcAddress(pDll, "ClearMyTracksByProcessW"); if (pAddressOfFunctionToCall == IntPtr.Zero) { Console.WriteLine("Function Not Found."); } ClearMyTracksByProcessW cmtbp = (ClearMyTracksByProcessW)Marshal.GetDelegateForFunctionPointer(pAddressOfFunctionToCall, typeof(ClearMyTracksByProcessW)); TargetHistory q = TargetHistory.CLEAR_TEMPORARY_INTERNET_FILES; long result = cmtbp(Process.GetCurrentProcess().Handle, Marshal.GetHINSTANCE(typeof(ClearMyTracksByProcessW).Module), ref q, FormWindowState.Normal); } } both use the following Enum: public enum TargetHistory { CLEAR_ALL = 0xFF, CLEAR_ALL_WITH_ADDONS = 0x10FF, CLEAR_HISTORY = 0x1, CLEAR_COOKIES = 0x2, CLEAR_TEMPORARY_INTERNET_FILES = 0x8, CLEAR_FORM_DATA = 0x10, CLEAR_PASSWORDS = 0x20 } Both methods of doing this compile and run just fine, offering no errors, but both churn endlessly never returning from their work. The PInvoke code was ported from the following VB, which was fairly difficult to track down: Option Explicit Private Enum TargetHistory CLEAR_ALL = &HFF& CLEAR_ALL_WITH_ADDONS = &H10FF& CLEAR_HISTORY = &H1& CLEAR_COOKIES = &H2& CLEAR_TEMPORARY_INTERNET_FILES = &H8& CLEAR_FORM_DATA = &H10& CLEAR_PASSWORDS = &H20& End Enum Private Declare Function ClearMyTracksByProcessW Lib "InetCpl.cpl" _ (ByVal hwnd As OLE_HANDLE, _ ByVal hinst As OLE_HANDLE, _ ByRef lpszCmdLine As Byte, _ ByVal nCmdShow As VbAppWinStyle) As Long Private Sub Command1_Click() Dim b() As Byte Dim o As OptionButton For Each o In Option1 If o.Value Then b = o.Tag ClearMyTracksByProcessW Me.hwnd, App.hInstance, b(0), vbNormalFocus Exit For End If Next End Sub Private Sub Form_Load() Command1.Caption = "??" Option1(0).Caption = "?????????????" Option1(0).Tag = CStr(CLEAR_TEMPORARY_INTERNET_FILES) Option1(1).Caption = "Cookie" Option1(1).Tag = CStr(CLEAR_COOKIES) Option1(2).Caption = "??" Option1(2).Tag = CStr(CLEAR_HISTORY) Option1(3).Caption = "???? ???" Option1(3).Tag = CStr(CLEAR_HISTORY) Option1(4).Caption = "?????" Option1(4).Tag = CStr(CLEAR_PASSWORDS) Option1(5).Caption = "?????" Option1(5).Tag = CStr(CLEAR_ALL) Option1(2).Value = True End Sub The question is simply what am I doing wrong? I need to clear the internet cache, and would prefer to use this method as I know it does what I want it to when it works (rundll32 inetcpl.cpl,ClearMyTracksByProcess 8 works fine). I've tried running both as normal user and admin to no avail. This project is written using C# in VS2012 and compiled against .NET3.5 (must remain at 3.5 due to client restrictions)

  Read the article

• Incremental PCA

  - by smichak

  Hi, Lately, I've been looking into an implementation of an incremental PCA algorithm in python - I couldn't find something that would meet my needs so I did some reading and implemented an algorithm I found in some paper. Here is the module's code - the relevant paper on which it is based is mentioned in the module's documentation. I would appreciate any feedback from people who are interested in this. Micha #!/usr/bin/env python """ Incremental PCA calculation module. Based on P.Hall, D. Marshall and R. Martin "Incremental Eigenalysis for Classification" which appeared in British Machine Vision Conference, volume 1, pages 286-295, September 1998. Principal components are updated sequentially as new observations are introduced. Each new observation (x) is projected on the eigenspace spanned by the current principal components (U) and the residual vector (r = x - U(U.T*x)) is used as a new principal component (U' = [U r]). The new principal components are then rotated by a rotation matrix (R) whose columns are the eigenvectors of the transformed covariance matrix (D=U'.T*C*U) to yield p + 1 principal components. From those, only the first p are selected. """ __author__ = "Micha Kalfon" import numpy as np _ZERO_THRESHOLD = 1e-9 # Everything below this is zero class IPCA(object): """Incremental PCA calculation object. General Parameters: m - Number of variables per observation n - Number of observations p - Dimension to which the data should be reduced """ def __init__(self, m, p): """Creates an incremental PCA object for m-dimensional observations in order to reduce them to a p-dimensional subspace. @param m: Number of variables per observation. @param p: Number of principle components. @return: An IPCA object. """ self._m = float(m) self._n = 0.0 self._p = float(p) self._mean = np.matrix(np.zeros((m , 1), dtype=np.float64)) self._covariance = np.matrix(np.zeros((m, m), dtype=np.float64)) self._eigenvectors = np.matrix(np.zeros((m, p), dtype=np.float64)) self._eigenvalues = np.matrix(np.zeros((1, p), dtype=np.float64)) def update(self, x): """Updates with a new observation vector x. @param x: Next observation as a column vector (m x 1). """ m = self._m n = self._n p = self._p mean = self._mean C = self._covariance U = self._eigenvectors E = self._eigenvalues if type(x) is not np.matrix or x.shape != (m, 1): raise TypeError('Input is not a matrix (%d, 1)' % int(m)) # Update covariance matrix and mean vector and centralize input around # new mean oldmean = mean mean = (n*mean + x) / (n + 1.0) C = (n*C + x*x.T + n*oldmean*oldmean.T - (n+1)*mean*mean.T) / (n + 1.0) x -= mean # Project new input on current p-dimensional subspace and calculate # the normalized residual vector g = U.T*x r = x - (U*g) r = (r / np.linalg.norm(r)) if not _is_zero(r) else np.zeros_like(r) # Extend the transformation matrix with the residual vector and find # the rotation matrix by solving the eigenproblem DR=RE U = np.concatenate((U, r), 1) D = U.T*C*U (E, R) = np.linalg.eigh(D) # Sort eigenvalues and eigenvectors from largest to smallest to get the # rotation matrix R sorter = list(reversed(E.argsort(0))) E = E[sorter] R = R[:,sorter] # Apply the rotation matrix U = U*R # Select only p largest eigenvectors and values and update state self._n += 1.0 self._mean = mean self._covariance = C self._eigenvectors = U[:, 0:p] self._eigenvalues = E[0:p] @property def components(self): """Returns a matrix with the current principal components as columns. """ return self._eigenvectors @property def variances(self): """Returns a list with the appropriate variance along each principal component. """ return self._eigenvalues def _is_zero(x): """Return a boolean indicating whether the given vector is a zero vector up to a threshold. """ return np.fabs(x).min() < _ZERO_THRESHOLD if __name__ == '__main__': import sys def pca_svd(X): X = X - X.mean(0).repeat(X.shape[0], 0) [_, _, V] = np.linalg.svd(X) return V N = 1000 obs = np.matrix([np.random.normal(size=10) for _ in xrange(N)]) V = pca_svd(obs) print V[0:2] pca = IPCA(obs.shape[1], 2) for i in xrange(obs.shape[0]): x = obs[i,:].transpose() pca.update(x) U = pca.components print U

  Read the article

• Explain the Peak and Flag Algorithm

  - by Isaac Levin

  EDIT Just was pointed that the requirements state peaks cannot be ends of Arrays. So I ran across this site http://codility.com/ Which gives you programming problems and gives you certificates if you can solve them in 2 hours. The very first question is one I have seen before, typically called the Peaks and Flags question. If you are not familiar A non-empty zero-indexed array A consisting of N integers is given. A peak is an array element which is larger than its neighbours. More precisely, it is an index P such that 0 < P < N - 1 and A[P - 1] < A[P] A[P + 1] . For example, the following array A: A[0] = 1 A[1] = 5 A[2] = 3 A[3] = 4 A[4] = 3 A[5] = 4 A[6] = 1 A[7] = 2 A[8] = 3 A[9] = 4 A[10] = 6 A[11] = 2 has exactly four peaks: elements 1, 3, 5 and 10. You are going on a trip to a range of mountains whose relative heights are represented by array A. You have to choose how many flags you should take with you. The goal is to set the maximum number of flags on the peaks, according to certain rules. Flags can only be set on peaks. What's more, if you take K flags, then the distance between any two flags should be greater than or equal to K. The distance between indices P and Q is the absolute value |P - Q|. For example, given the mountain range represented by array A, above, with N = 12, if you take: two flags, you can set them on peaks 1 and 5; three flags, you can set them on peaks 1, 5 and 10; four flags, you can set only three flags, on peaks 1, 5 and 10. You can therefore set a maximum of three flags in this case. Write a function that, given a non-empty zero-indexed array A of N integers, returns the maximum number of flags that can be set on the peaks of the array. For example, given the array above the function should return 3, as explained above. Assume that: N is an integer within the range [1..100,000]; each element of array A is an integer within the range [0..1,000,000,000]. Complexity: expected worst-case time complexity is O(N); expected worst-case space complexity is O(N), beyond input storage (not counting the storage required for input arguments). Elements of input arrays can be modified. So this makes sense, but I failed it using this code public int GetFlags(int[] A) { List<int> peakList = new List<int>(); for (int i = 0; i <= A.Length - 1; i++) { if ((A[i] > A[i + 1] && A[i] > A[i - 1])) { peakList.Add(i); } } List<int> flagList = new List<int>(); int distance = peakList.Count; flagList.Add(peakList[0]); for (int i = 1, j = 0, max = peakList.Count; i < max; i++) { if (Math.Abs(Convert.ToDecimal(peakList[j]) - Convert.ToDecimal(peakList[i])) >= distance) { flagList.Add(peakList[i]); j = i; } } return flagList.Count; } EDIT int[] A = new int[] { 7, 10, 4, 5, 7, 4, 6, 1, 4, 3, 3, 7 }; The correct answer is 3, but my application says 2 This I do not get, since there are 4 peaks (indices 1,4,6,8) and from that, you should be able to place a flag at 2 of the peaks (1 and 6) Am I missing something here? Obviously my assumption is that the beginning or end of an Array can be a peak, is this not the case? If this needs to go in Stack Exchange Programmers, I will move it, but thought dialog here would be helpful. EDIT

  Read the article

• Does JUnit4 testclasses require a public no arg constructor?

  - by Thomas Baun

  I have a test class, written in JUnit4 syntax, that can be run in eclipse with the "run as junit test" option without failing. When I run the same test via an ant target I get this error: java.lang.Exception: Test class should have public zero-argument constructor at org.junit.internal.runners.MethodValidator.validateNoArgConstructor(MethodValidator.java:54) at org.junit.internal.runners.MethodValidator.validateAllMethods(MethodValidator.java:39) at org.junit.internal.runners.TestClassRunner.validate(TestClassRunner.java:33) at org.junit.internal.runners.TestClassRunner.<init>(TestClassRunner.java:27) at org.junit.internal.runners.TestClassRunner.<init>(TestClassRunner.java:20) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at org.junit.internal.requests.ClassRequest.getRunner(ClassRequest.java:26) at junit.framework.JUnit4TestAdapter.<init>(JUnit4TestAdapter.java:24) at junit.framework.JUnit4TestAdapter.<init>(JUnit4TestAdapter.java:17) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:386) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:911) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:768) Caused by: java.lang.NoSuchMethodException: dk.gensam.gaia.business.bonusregulering.TestBonusregulerAftale$Test1Reader.<init>() at java.lang.Class.getConstructor0(Class.java:2706) at java.lang.Class.getConstructor(Class.java:1657) at org.junit.internal.runners.MethodValidator.validateNoArgConstructor(MethodValidator.java:52) I have no public no arg constructor in the class, but is this really necessary? This is my ant target <target name="junit" description="Execute unit tests" depends="compile, jar-test"> <delete dir="tmp/rawtestoutput"/> <delete dir="test-reports"/> <mkdir dir="tmp/rawtestoutput"/> <junit printsummary="true" failureproperty="junit.failure" fork="true"> <classpath refid="class.path.test"/> <classpath refid="class.path.model"/> <classpath refid="class.path.gui"/> <classpath refid="class.path.jfreereport"/> <classpath path="tmp/${test.jar}"></classpath> <batchtest todir="tmp/rawtestoutput"> <fileset dir="${build}/test"> <include name="**/*Test.class" /> <include name="**/Test*.class" /> </fileset> </batchtest> </junit> <junitreport todir="tmp"> <fileset dir="tmp/rawtestoutput"/> <report todir="test-reports"/> </junitreport> <fail if="junit. failure" message="Unit test(s) failed. See reports!"/> </target> The test class have no constructors, but it has an inner class with default modifier. It also have an anonymouse inner class. Both inner classes gives the "Test class should have public zero-argument constructor error". I am using Ant version 1.7.1 and JUnit 4.7

  Read the article

• Efficient representation of Hierarchies in Hibernate.

  - by Alison G

  I'm having some trouble representing an object hierarchy in Hibernate. I've searched around, and haven't managed to find any examples doing this or similar - you have my apologies if this is a common question. I have two types which I'd like to persist using Hibernate: Groups and Items. * Groups are identified uniquely by a combination of their name and their parent. * The groups are arranged in a number of trees, such that every Group has zero or one parent Group. * Each Item can be a member of zero or more Groups. Ideally, I'd like a bi-directional relationship allowing me to get: * all Groups that an Item is a member of * all Items that are a member of a particular Group or its descendants. I also need to be able to traverse the Group tree from the top in order to display it on the UI. The basic object structure would ideally look like this: class Group { ... /** @return all items in this group and its descendants */ Set<Item> getAllItems() { ... } /** @return all direct children of this group */ Set<Group> getChildren() { ... } ... } class Item { ... /** @return all groups that this Item is a direct member of */ Set<Group> getGroups() { ... } ... } Originally, I had just made a simple bi-directional many-to-many relationship between Items and Groups, such that fetching all items in a group hierarchy required recursion down the tree, and fetching groups for an Item was a simple getter, i.e.: class Group { ... private Set<Item> items; private Set<Group> children; ... /** @return all items in this group and its descendants */ Set<Item> getAllItems() { Set<Item> allItems = new HashSet<Item>(); allItems.addAll(this.items); for(Group child : this.getChildren()) { allItems.addAll(child.getAllItems()); } return allItems; } /** @return all direct children of this group */ Set<Group> getChildren() { return this.children; } ... } class Item { ... private Set<Group> groups; /** @return all groups that this Item is a direct member of */ Set<Group> getGroups() { return this.groups; } ... } However, this resulted in multiple database requests to fetch the Items in a Group with many descendants, or for retrieving the entire Group tree to display in the UI. This seems very inefficient, especially with deeper, larger group trees. Is there a better or standard way of representing this relationship in Hibernate? Am I doing anything obviously wrong or stupid? My only other thought so far was this: Replace the group's id, parent and name fields with a unique "path" String which specifies the whole ancestry of a group, e.g.: /rootGroup /rootGroup/aChild /rootGroup/aChild/aGrandChild The join table between Groups and Items would then contain group_path and item_id. This immediately solves the two issues I was suffering previously: 1. The entire group hierarchy can be fetched from the database in a single query and reconstructed in-memory. 2. To retrieve all Items in a group or its descendants, we can select from group_item where group_path='N' or group_path like 'N/%' However, this seems to defeat the point of using Hibernate. All thoughts welcome!

  Read the article

• Getting value of LSB from Hex (C code)

  - by Rjff

  Hi - first post here :) I've got a code like this in C: unsigned char const data[ ] = {0x0a, 0x1d, 0xf0, 0x07}; I need to extract it such that the final value is: 0xa1df7 I have only been able to extract and get it working if the hex values that have at least 1 zero: unsigned char const data[ ] = {0x0a, 0xd0, 0xf0, 0x07}; using the code below: for(int i = 0; i < SIZE; ++i) { tmp = data[i]; if ( (data[i] <= 0x0F) && (((data[i] & 0x0F) == 0) || (data[i] & 0xF0) == 0)) // one of the hex is zero { tmp = ((tmp << 4) >> 4) << N[i]; std::cout << "foo: " << std::hex << tmp << ":" << std::endl; } else if ((data[i] >= 0x0F) && (((data[i] & 0x0F) == 0) || (data[i] & 0xF0) == 0) ) { tmp = (tmp >> 4) << N[i]; std::cout << "bar: " << std::hex << tmp << ":" << std::endl; } else { std::cout << "result: " << std::hex << result << ":" << std::endl; std::cout << "tmp << 8: " << std::hex << (tmp << 8)<< ":" << std::endl; result = result | (tmp << 8); std::cout << "result |= (tmp << 8): " << std::hex << result << ":" << std::endl; } result |= tmp; std::cout << "boo: " << std::hex << result << ":" << std::endl; } It seems the last else {...} block is troublesome for me. Any ideas? Thanks!

  Read the article

• .NET GDI+ image size - file codec limitations

  - by roygbiv

  Is there a limit on the size of image that can be encoded using the image file codecs available from .NET? I'm trying to encode images 4GB in size, but it simply does not work (or does not work properly i.e. writes out an unreadable file) with .bmp, .jpg, .png or the .tif encoders. When I lower the image size to < 2GB it does work with the .jpg but not the .bmp, .tif or .png. My next attempt would be to try libtiff because I know tiff files are meant for large images. What is a good file format for large images? or am I just hitting the file format limitations? Random r = new Random((int)DateTime.Now.Ticks); int width = 64000; int height = 64000; int stride = (width % 4) > 0 ? width + (width % 4) : width; UIntPtr dataSize = new UIntPtr((ulong)stride * (ulong)height); IntPtr p = Program.VirtualAlloc(IntPtr.Zero, dataSize, Program.AllocationType.COMMIT | Program.AllocationType.RESERVE, Program.MemoryProtection.READWRITE); Bitmap bmp = new Bitmap(width, height, stride, PixelFormat.Format8bppIndexed, p); BitmapData bd = bmp.LockBits(new Rectangle(0, 0, bmp.Width, bmp.Height), ImageLockMode.ReadWrite, bmp.PixelFormat); ColorPalette cp = bmp.Palette; for (int i = 0; i < cp.Entries.Length; i++) { cp.Entries[i] = Color.FromArgb(i, i, i); } bmp.Palette = cp; unsafe { for (int y = 0; y < bd.Height; y++) { byte* row = (byte*)bd.Scan0.ToPointer() + (y * bd.Stride); for (int x = 0; x < bd.Width; x++) { *(row + x) = (byte)r.Next(256); } } } bmp.UnlockBits(bd); bmp.Save(@"c:\test.jpg", ImageFormat.Jpeg); bmp.Dispose(); Program.VirtualFree(p, UIntPtr.Zero, 0x8000); I have also tried using a pinned GC memory region, but this is limited to < 2GB. Random r = new Random((int)DateTime.Now.Ticks); int bytesPerPixel = 4; int width = 4000; int height = 4000; int padding = 4 - ((width * bytesPerPixel) % 4); padding = (padding == 4 ? 0 : padding); int stride = (width * bytesPerPixel) + padding; UInt32[] pixels = new UInt32[width * height]; GCHandle gchPixels = GCHandle.Alloc(pixels, GCHandleType.Pinned); using (Bitmap bmp = new Bitmap(width, height, stride, PixelFormat.Format32bppPArgb, gchPixels.AddrOfPinnedObject())) { for (int y = 0; y < height; y++) { int row = (y * width); for (int x = 0; x < width; x++) { pixels[row + x] = (uint)r.Next(); } } bmp.Save(@"c:\test.jpg", ImageFormat.Jpeg); } gchPixels.Free();

  Read the article

• Generating strongly biased radom numbers for tests

  - by nobody

  I want to run tests with randomized inputs and need to generate 'sensible' random numbers, that is, numbers that match good enough to pass the tested function's preconditions, but hopefully wreak havoc deeper inside its code. math.random() (I'm using Lua) produces uniformly distributed random numbers. Scaling these up will give far more big numbers than small numbers, and there will be very few integers. I would like to skew the random numbers (or generate new ones using the old function as a randomness source) in a way that strongly favors 'simple' numbers, but will still cover the whole range, I.e. extending up to positive/negative infinity (or ±1e309 for double). This means: numbers up to, say, ten should be most common, integers should be more common than fractions, numbers ending in 0.5 should be the most common fractions, followed by 0.25 and 0.75; then 0.125, and so on. A different description: Fix a base probability x such that probabilities will sum to one and define the probability of a number n as xk where k is the generation in which n is constructed as a surreal number1. That assigns x to 0, x2 to -1 and +1, x3 to -2, -1/2, +1/2 and +2, and so on. This gives a nice description of something close to what I want (it skews a bit too much), but is near-unusable for computing random numbers. The resulting distribution is nowhere continuous (it's fractal!), I'm not sure how to determine the base probability x (I think for infinite precision it would be zero), and computing numbers based on this by iteration is awfully slow (spending near-infinite time to construct large numbers). Does anyone know of a simple approximation that, given a uniformly distributed randomness source, produces random numbers very roughly distributed as described above? I would like to run thousands of randomized tests, quantity/speed is more important than quality. Still, better numbers mean less inputs get rejected. Lua has a JIT, so performance can't be reasonably predicted. Jumps based on randomness will break every prediction, and many calls to math.random() will be slow, too. This means a closed formula will be better than an iterative or recursive one. 1 Wikipedia has an article on surreal numbers, with a nice picture. A surreal number is a pair of two surreal numbers, i.e. x := {n|m}, and its value is the number in the middle of the pair, i.e. (for finite numbers) {n|m} = (n+m)/2 (as rational). If one side of the pair is empty, that's interpreted as increment (or decrement, if right is empty) by one. If both sides are empty, that's zero. Initially, there are no numbers, so the only number one can build is 0 := { | }. In generation two one can build numbers {0| } =: 1 and { |0} =: -1, in three we get {1| } =: 2, {|1} =: -2, {0|1} =: 1/2 and {-1|0} =: -1/2 (plus some more complex representations of known numbers, e.g. {-1|1} ? 0). Note that e.g. 1/3 is never generated by finite numbers because it is an infinite fraction – the same goes for floats, 1/3 is never represented exactly.

  Read the article

• simplify in declaring variables value in php

  - by Robert John Concepcion

  $jan5 = 0; $feb5 = 0; $mar5 = 0; $apr5 = 0; $may5 = 0; $jun5 = 0; $jul5 = 0; $aug5 = 0; $sep5 = 0; $oct5 = 0; $nov5 = 0; $dec5 = 0; $jan4 = 0; $feb4 = 0; $mar4 = 0; $apr4 = 0; $may4 = 0; $jun4 = 0; $jul4 = 0; $aug4 = 0; $sep4 = 0; $oct4 = 0; $nov4 = 0; $dec4 = 0; $jan3 = 0; $feb3 = 0; $mar3 = 0; $apr3 = 0; $may3 = 0; $jun3 = 0; $jul3 = 0; $aug3 = 0; $sep3 = 0; $oct3 = 0; $nov3 = 0; $dec3 = 0; this is the most time consuming code when i try to make for example i want the default value of $jan5 is equal to zero.. can some one teach me how to make this short? thank you so much for reading $date = 'smi_initialdate'; $level = 'smi_level'; $year = '2012'; $result1 = mysql_query("SELECT *, DATE_FORMAT( $date, '%m' ) As monthz FROM eis_mngt_sales_iti WHERE year($date) = '$year' ORDER BY $date"); while($row=mysql_fetch_array($result1)) { $count++; if($row['smi_level']=='5star') { if($row['monthz']==1) { $jan++; }elseif($row['monthz']==2) { $feb++; }elseif($row['monthz']==3) { $mar++; }elseif($row['monthz']==4) { $apr++; }elseif($row['monthz']==5) { $may++; }elseif($row['monthz']==6) { $jun++; }elseif($row['monthz']==7) { $jul++; }elseif($row['monthz']==8) { $aug++; }elseif($row['monthz']==9) { $sep++; }elseif($row['monthz']==10) { $oct++; }elseif($row['monthz']==11) { $nov++; }elseif($row['monthz']==12) { $dec++; } } } i decide to put this $jan5 = 0;$feb5 = 0;$mar5 = 0;$apr5 = 0;$may5 = 0;$jun5 = 0;$jul5 = 0; so that if the data did not pass to this condition if($row['smi_level']=='5star') they have the return value of zero(0). so that my output can adapt in this code [<?php echo$jan5.",".$feb5.",".$mar5.",".$apr5.",".$may5.",".$jun5.",".$jul5.",".$aug5.",".$sep5.",".$oct5.",".$nov5.",".$dec5; ?] if a dont use the above code the $jan5 = 0;$feb5 = 0;$mar5 = 0;$apr5 = 0;$may5 = 0;$jun5 = 0;$jul5 = 0;................ when i echo or print it i look like this 1,2,5,11,12 but with the use of that(the first sample code above) the output will be 1,0,0,0,0,0,0,1,2,5,11,12. thank, sorry if this became confusing, sorry about my grammar

  Read the article

• Oracle Linux Forum

  - by rickramsey

  This forum includes live chat so you can tell Wim, Lenz, and the gang what you really think. Linux Forum - Tuesday March 27 Since Oracle recently made Release 2 of its Unbreakable Enterprise Kernel available (see Lenz's blog), we're following up with an online forum with Oracle's Linux executives and engineers. Topics will be: 9:30 - 9:45 am PT Oracle's Linux Strategy Edward Screven, Oracle's Chief Corporate Architect and Wim Coekaerts, Senior VP of Linux and Virtualization Engineering, will explain Oracle's Linux strategy, the benefits of Oracle Linux, Oracle's role in the Linux community, and the Oracle Linux roadmap. 9:45 - 10:00 am PT Why Progressive Insurance Chose Oracle Linux John Dome, Lead Systems Engineer at Progressive Insurance, outlines why they selected Oracle Linux with the Unbreakable Enterprise Kernel to reduce cost and increase the performance of database applications. 10:00 - 11:00 am PT What's New in Oracle Linux Oracle engineers walk you through new features in Oracle Linux, including zero-downtime updates with Ksplice, Btrfs and OCFS2, DTrace for Linux, Linux Containers, vSwitch and T-Mem. 11:00 am - 12:00 pm PT Get More Value from your Linux Vendor Why Oracle Linux delivers more value than Red Hat Enterprise Linux, including better support at lower cost, best practices for deployments, extreme performance for cloud deployments and engineered systems, and more. Date: Tuesday, March 27, 2012 Time: 9:30 AM PT / 12:30 PM ET Duration: 2.5 hours Register here. - Rick

  Read the article

• Smithsonian Showcases Video Game History with The Art of Video Games [Video]

  - by Jason Fitzpatrick

  The Art of Video Games is the Smithsonian’s look at the history of video games; check out this video trailer to see what the exhibition is all about and hear from some notable folks. From the Smithsonian listing for the exhibition: The Art of Video Games is one of the first exhibitions to explore the forty-year evolution of video games as an artistic medium, with a focus on striking visual effects and the creative use of new technologies. It features some of the most influential artists and designers during five eras of game technology, from early pioneers to contemporary designers. The exhibition focuses on the interplay of graphics, technology and storytelling through some of the best games for twenty gaming systems ranging from the Atari VCS to the PlayStation 3. The exhibit will be at the Smithsonian until the end of September and will then begin touring the country. Hit up the link below for more information. The Art of Video Games Tour [via Neatorama] How To Properly Scan a Photograph (And Get An Even Better Image) The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume Make Your Own Windows 8 Start Button with Zero Memory Usage

  Read the article

• FileNameColumnName property, Flat File Source Adapter : SSIS Nugget

  - by jamiet

  I saw a question on MSDN’s SSIS forum the other day that went something like this: I’m loading data into a table from a flat file but I want to be able to store the name of that file as well. Is there a way of doing that? I don’t want to come across as disrespecting those who took the time to reply but there was a few answers along the lines of “loop over the files using a For Each, store the file name in a variable yadda yadda yadda” when in fact there is a much much simpler way of accomplishing this; it just happens to be a little hidden away as I shall now explain! The Flat File Source Adapter has a property called FileNameColumnName which for some reason it isn’t exposed through the Flat File Source editor, it is however exposed via the Advanced Properties: You’ll see in the screenshot above that I have set FileNameColumnName=“Filename” (it doesn’t matter what name you use, anything except a non-zero string will work). What this will do is create a new column in our dataflow called “Filename” that contains, unsurprisingly, the name of the file from which the row was sourced. All very simple. This is particularly useful if you are extracting data from multiple files using the MultiFlatFile Connection Manager as it allows you to differentiate between data from each of the files as you can see in the following screenshot: So there you have it, the FileNameColumnName property; a little known secret of SSIS. I hope it proves to be useful to someone out there. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Z axis in isometric tilemap

  - by gyhgowvi

  I'm experimenting with isometric tile maps in JavaScript and HTML5 Canvas. I'm storing tile map data in JavaScript 2D array. // 0 - Grass // 1 - Dirt // ... var mapData = [ [0, 0, 0, 0, 0], [0, 0, 1, 0, 0, ... ] and draw for(var i = 0; i < mapData.length; i++) { for(var j = 0; j < mapData[i].length; j++) { var p = iso2screen(i, j, 0); // X, Y, Z context.drawImage(tileArray[mapData[i][j]], p.x, p.y); } } but this function mean's all tile Z axis is equal to zero. var p = iso2screen(i, j, 0); Maybe anyone have idea and how to do something like mapData[0][0] Z axis equal to 3 mapData[5][5] Z axis equal to 5? I have idea: Write function for grass, dirt and store this function to 2D array and draw and later mapData[0][0].setZ(3); But it is good idea to write functions for each tiles?

  Read the article

• Zipcodes in CSV Generation

  - by BRADINO

  When exporting to CSV format, then opening in a spreadsheet program like Excel zipcodes that start with a zero or zeroes have the preceding zeros stripped off. Obviously it is because the spreadsheet sees that column as integers and preceding zeros in integers are useless. A quick and dirty trick to force Excel (hopefully you are using OpenOffice) to display the full zipcode, we wrap it in double quotes and put an equal sign in front of it, to force it to be a string like this: $zipcode = 00123; $data = '="' . $zipcode . '"' ; So if you are doing the straight query to CSV export, using the fputcsv function it would look something like this. Basically just overwrite the value in the row and then continue along. while ($row = mysql_fetch_assoc($query)){         $row['zipcode'] = '="'.$row['zipcode'].'"';     fputcsv($output, $row); } php csv zipcode csv number csv force string

  Read the article

• FileNameColumnName property, Flat File Source Adapter : SSIS Nugget

  - by jamiet

  I saw a question on MSDN’s SSIS forum the other day that went something like this: I’m loading data into a table from a flat file but I want to be able to store the name of that file as well. Is there a way of doing that? I don’t want to come across as disrespecting those who took the time to reply but there was a few answers along the lines of “loop over the files using a For Each, store the file name in a variable yadda yadda yadda” when in fact there is a much much simpler way of accomplishing this; it just happens to be a little hidden away as I shall now explain! The Flat File Source Adapter has a property called FileNameColumnName which for some reason it isn’t exposed through the Flat File Source editor, it is however exposed via the Advanced Properties: You’ll see in the screenshot above that I have set FileNameColumnName=“Filename” (it doesn’t matter what name you use, anything except a non-zero string will work). What this will do is create a new column in our dataflow called “Filename” that contains, unsurprisingly, the name of the file from which the row was sourced. All very simple. This is particularly useful if you are extracting data from multiple files using the MultiFlatFile Connection Manager as it allows you to differentiate between data from each of the files as you can see in the following screenshot: So there you have it, the FileNameColumnName property; a little known secret of SSIS. I hope it proves to be useful to someone out there. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Queued Loadtest to remove Concurrency issues using Shared Data Service in OpenScript

  - by stefan.thieme(at)oracle.com

  Queued Processing to remove Concurrency issues in Loadtest ScriptsSome scripts act on information returned by the server, e.g. act on first item in the returned list of pending tasks/actions. This may lead to concurrency issues if the virtual users simulated in a load test scenario are not synchronized in some way.As the load test cases should be carried out in a comparable and straight forward manner simply cancel a transaction in case a collision occurs is clearly not an option. In case you increase the number of virtual users this approach would lead to a high number of requests for the early steps in your transaction (e.g. login, retrieve list of action points, assign an action point to the virtual user) but later steps would be rarely visited successfully or at all, depending on the application logic.A way to tackle this problem is to enqueue the virtual users in a Shared Data Service queue. Only the first virtual user in this queue will be allowed to carry out the critical steps (retrieve list of action points, assign an action point to the virtual user) in your transaction at any one time.Once a virtual user has passed the critical path it will dequeue himself from the head of the queue and continue with his actions. This does theoretically allow virtual users to run in parallel all steps of the transaction which are not part of the critical path.In practice it has been seen this is rarely the case, though it does not allow adding more than N users to perform a transaction without causing delays due to virtual users waiting in the queue. N being the time of the total transaction divided by the sum of the time of all critical steps in this transaction.While this problem can be circumvented by allowing multiple queues to act on individual segments of the list of actions, e.g. per country filter, ends with 0..9 filter, etc.This would require additional handling of these additional queues of slots for the virtual users at the head of the queue in order to maintain the mutually exclusive access to the first element in the list returned by the server at any one time of the load test. Such an improved handling of multiple queues and/or multiple slots is above the subject of this paper.Shared Data Services Pre-RequisitesStart WebLogic Server to host Shared Data ServicesYou will have to make sure that your WebLogic server is installed and started. Shared Data Services may not work if you installed only the minimal installation package for OpenScript. If however you installed the default package including OLT and OTM, you may follow the instructions below to start and verify WebLogic installation.To start the WebLogic Server deployed underneath of Oracle Load Testing and/or Oracle Test Manager you can go to your Start menu, Oracle Application Testing Suite and select the Restart Oracle Application Testing Suite Application Service entry from the Tools submenu.To verify the service has been started you can run the Microsoft Management Console for Services by Selecting Run from the Start Menu and entering services.msc. Look for the entry that reads Oracle Application Testing Suite Application Service, once it has changed it status from Starting to Started you can proceed to verify the login. Please note that this may take several minutes, I would say up to 10 minutes depending on the strength of your CPU horse-power.Verify WebLogic Server user credentialsYou will have to make sure that your WebLogic Server is installed and started. Next open the Oracle WebLogic Server Adminstration Console on http://localhost:8088/console.It may take a while until the application is deployed and started. It may display the following until the Administration Console has been deployed on the fly.Afterwards you can login using the username oats and the password that you selected during install time for your Application Testing Suite administrative purposes.This will bring up the Home page of you WebLogic Server. You have actually verified that you are able to login with these credentials already. However if you want to check the details, navigate to Security Realms, myrealm, Users and Groups tab.Here you could add users to your WebLogic Server which could be used in the later steps. Details on the Groups required for such a custom user to work are exceeding this quick overview and have to be selected with the WebLogic Server Adminstration Guide in mind.Shared Data Services pre-requisites for Load testingOpenScript Preferences have to be set to enable Encryption and provide a default Shared Data Service Connection for Playback.These are pre-requisites you want to use for load testing with Shared Data Services.Please note that the usage of the Connection Parameters (individual directive in the script) for Shared Data Services did not playback reliably in the current version 9.20.0370 of Oracle Load Testing (OLT) and encryption of credentials still seemed to be mandatory as well.General Encryption settingsSelect OpenScript Preferences from the View menu and navigate to the General, Encryption entry in the tree on the left. Select the Encrypt script data option from the list and enter the same password that you used for securing your WebLogic Server Administration Console.Enable global shared data access credentialsSelect OpenScript Preferences from the View menu and navigate to the Playback, Shared Data entry in the tree on the left. Enable the global shared data access credentials and enter the Address, User name and Password determined for your WebLogic Server to host Shared Data Services.Please note, that you may want to replace the localhost in Address with the hosts realname in case you plan to run load tests with Loadtest Agents running on remote systems.Queued Processing of TransactionsEnable Shared Data Services Module in Script PropertiesThe Shared Data Services Module has to be enabled for each Script that wants to employ the Shared Data Service Queue functionality in OpenScript. It can be enabled under the Script menu selecting Script Properties. On the Script Properties Dialog select the Modules section and check Shared Data to enable Shared Data Service Module for your script. Checking the Shared Data Services option will effectively add a line to your script code that adds the sharedData ScriptService to your script class of IteratingVUserScript.@ScriptService oracle.oats.scripting.modules.sharedData.api.SharedDataService sharedData;Record your scriptRecord your script as usual and then add the following things for Queue handling in the Initialize code block, before the first step and after the last step of your critical path and in the Finalize code block.The java code to be added at individual locations is explained in the following sections in full detail.Create a Shared Data Queue in InitializeTo create a Shared Data Queue go to the Java view of your script and enter the following statements to the initialize() code block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);This will create an instantiation of the Shared Data Queue object named queueA which is maintained for upto 120 minutes.If you want to use the code for multiple scripts, make sure to use a different queue name for each one here and in the subsequent steps. You may even consider to use a dynamic queueName based on filters of your result list being concurrently accessed.Prepare a unique id for each IterationIn order to keep track of individual virtual users in our queue we need to create a unique identifier from the virtual user id and the used username right after retrieving the next record from our databank file.getDatabank("Usernames").getNextDatabankRecord();getVariables().set("usernameValue1","VU_{{@vuid}}_{{@iterationnum}}_{{db.Usernames.Username}}_{{@timestamp}}_{{@random(10000)}}");String usernameValue = getVariables().get("usernameValue1");info("Now running virtual user " + usernameValue);As you can see from the above code block, we have set the OpenScript variable usernameValue1 to VU_{{@vuid}}_{{@iterationnum}}_{{db.Usernames.Username}}_{{@timestamp}}_{{@random(10000)}} which is a concatenation of the virtual user id and the iterationnumber for general uniqueness; as well as the username from our databank, the timestamp and a random number for making it further unique and ease spotting of errors.Not all of these fields are actually required to make it really unique, but adding the queue name may also be considered to help troubleshoot multiple queues.The value is then retrieved with the getVariables.get() method call and assigned to the usernameValue String used throughout the script.Please note that moving the getDatabank("Usernames").getNextDatabankRecord(); call to the initialize block was later considered to remove concurrency of multiple virtual users running with the same userid and therefor accessing the same "My Inbox" in step 6. This will effectively give each virtual user a userid from the databank file. Make sure you have enough userids to remove this second hurdle.Enqueue and attend Queue before Critical PathTo maintain the right order of virtual users being allowed into the critical path of the transaction the following pseudo step has to be added in front of the first critical step. In the case of this example this is right in front of the step where we retrieve the list of actions from which we select the first to be assigned to us.beginStep("[0] Waiting in the Queue", 0);{info("Enqueued virtual user " + usernameValue + " at the end of queueA");sharedData.offerLast("queueA", usernameValue);info("Wait until the user is the first in queueA");String queueValue1 = null;do {// we wait for at least 0.7 seconds before we check the head of the// queue. This is the time it takes one user to move through the// critical path, i.e. pass steps [5] Enter country and [6] Assign// to meThread.sleep(700);queueValue1 = (String) sharedData.peekFirst("queueA");info("The first user in queueA is currently: '" + queueValue1 + "' " + queueValue1.getClass() + " length " + queueValue1.length() );info("The current user is '"+ usernameValue + "' " + usernameValue.getClass() + " length " + usernameValue.length() + ": indexOf " + usernameValue.indexOf(queueValue1) + " equals " + usernameValue.equals(queueValue1) );} while ( queueValue1.indexOf(usernameValue) < 0 );info("Now the user is the first in queueA");}endStep();This will enqueue the username to the tail of our Queue. It will will wait for at least 700 milliseconds, the time it takes for one user to exit the critical path and then compare the head of our queue with it's username. This last step will be repeated while the two are not equal (indexOf less than zero). If they are equal the indexOf will yield a value of zero or larger and we will perform the critical steps.Dequeue after Critical PathAfter the virtual user has left the critical path and complete its last step the following code block needs to dequeue the virtual user. In the case of our example this is right after the action has been actually assigned to the virtual user. This will allow the next virtual user to retrieve the list of actions still available and in turn let him make his selection/assignment.info("Get and remove the current user from the head of queueA");String pollValue1 = (String) sharedData.pollFirst("queueA");The current user is removed from the head of the queue. The next one will now be able to match his username against the head of the queue.Clear and Destroy Queue for FinishWhen the script has completed, it should clear and destroy the queue. This code block can be put in the finish block of your script and/or in a separate script in order to clear and remove the queue in case you have spotted an error or want to reset the queue for some reason.info("Clear queueA");sharedData.clearQueue("queueA");info("Destroy queueA");sharedData.destroyQueue("queueA");The users waiting in queueA are cleared and the queue is destroyed. If you have scripts still executing they will be caught in a loop.I found it better to maintain a separate Reset Queue script which contained only the following code in the initialize() block. I use to call this script to make sure the queue is cleared in between multiple Loadtest runs. This script could also even be added as the first in a larger scenario, which would execute it only once at very start of the Loadtest and make sure the queues do not contain any stale entries.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);info("Clear queueA");sharedData.clearQueue("queueA");This will create a Shared Data Queue instance of queueA and clear all entries from this queue.Monitoring QueueWhile creating the scripts it was useful to monitor the contents, i.e. the current first user in the Queue. The following code block will make sure the Shared Data Queue is accessible in the initialize() block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);In the run() block the following code will continuously monitor the first element of the Queue and write an informational message with the current username Value to the Result window.info("Monitor the first users in queueA");String queueValue1 = null;do {queueValue1 = (String) sharedData.peekFirst("queueA");if (queueValue1 != null)info("The first user in queueA is currently: '" + queueValue1 + "' " + queueValue1.getClass() + " length " + queueValue1.length() );} while ( true );This script can be run from OpenScript parallel to a loadtest performed by the Oracle Load Test.However it is not recommend to run this in a production loadtest as the performance impact is unknown. Accessing the Queue's head with the peekFirst() method has been reported with about 2 seconds response time by both OpenScript and OTL. It is advised to log a Service Request to see if this could be lowered in future releases of Application Testing Suite, as the pollFirst() and even offerLast() writing to the tail of the Queue usually returned after an average 0.1 seconds.Debugging QueueWhile debugging the scripts the following was useful to remove single entries from its head, i.e. the current first user in the Queue. The following code block will make sure the Shared Data Queue is accessible in the initialize() block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);In the run() block the following code will remove the first element of the Queue and write an informational message with the current username Value to the Result window.info("Get and remove the current user from the head of queueA");String pollValue1 = (String) sharedData.pollFirst("queueA");info("The first user in queueA was currently: '" + pollValue1 + "' " + pollValue1.getClass() + " length " + pollValue1.length() );ReferencesOracle Functional Testing OpenScript User's Guide Version 9.20 [E15488-05]Chapter 17 Using the Shared Data Modulehttp://download.oracle.com/otn/nt/apptesting/oats-docs-9.21.0030.zipOracle Fusion Middleware Oracle WebLogic Server Administration Console Online Help 11g Release 1 (10.3.4) [E13952-04]Administration Console Online Help - Manage users and groupshttp://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/security/ManageUsersAndGroups.htm

  Read the article

• Quotas - Using quotas on ZFSSA shares and projects and users

  - by Steve Tunstall

  So you don't want your users to fill up your entire storage pool with their MP3 files, right? Good idea to make some quotas. There's some good tips and tricks here, including a helpful workflow (a script) that will allow you to set a default quota on all of the users of a share at once. Let's start with some basics. I mad a project called "small" and inside it I made a share called "Share1". You can set quotas on the project level, which will affect all of the shares in it, or you can do it on the share level like I am here. Go the the share's General property page. First, I'm using a Windows client, so I need to make sure I have my SMB mountpoint. Do you know this trick yet? Go to the Protocol page of the share. See the SMB section? It needs a resource name to make the UNC path for the SMB (Windows) users. You do NOT have to type this name in for every share you make! Do this at the Project level. Before you make any shares, go to the Protocol properties of the Project, and set the SMB Resource name to "On". This special code will automatically make the SMB resource name of every share in the project the same as the share name. Note the UNC path name I got below. Since I did this at the Project level, I didn't have to lift a finger for it to work on every share I make in this project. Simple. So I have now mapped my Windows "Z:" drive to this Share1. I logged in as the user "Joe". Note that my computer shows my Z: drive as 34GB, which is the entire size of my Pool that this share is in. Right now, Joe could fill this drive up and it would fill up my pool.  Now, go back to the General properties of Share1. In the "Space Usage" area, over on the right, click on the "Show All" text under the Users & Groups section. Sure enough, Joe and some other users are in here and have some data. Note this is also a handy window to use just to see how much space your users are using in any given share.  Ok, Joe owes us money from lunch last week, so we want to give him a quota of 100MB. Type his name in the Users box. Notice how it now shows you how much data he's currently using. Go ahead and give him a 100M quota and hit the Apply button. If I go back to "Show All", I can see that Joe now has a quota, and no one else does. Sure enough, as soon as I refresh my screen back on Joe's client, he sees that his Z: drive is now only 100MB, and he's more than half way full.  That was easy enough, but what if you wanted to make the whole share have a quota, so that the share itself, no matter who uses it, can only grow to a certain size? That's even easier. Just use the Quota box on the left hand side. Here, I use a Quota on the share of 300MB.  So now I log off as Joe, and log in as Steve. Even though Steve does NOT have a quota, it is showing my Z: drive as 300MB. This would effect anyone, INCLUDING the ROOT user, becuase you specified the Quota to be on the SHARE, not on a person.  Note that back in the Share, if you click the "Show All" text, the window does NOT show Steve, or anyone else, to have a quota of 300MB. Yet we do, because it's on the share itself, not on any user, so this panel does not see that. Ok, here is where it gets FUN.... Let's say you do NOT want a quota on the SHARE, because you want SOME people, like Root and yourself, to have FULL access to it and you want the ability to fill the whole thing up if you darn well feel like it. HOWEVER, you want to give the other users a quota. HOWEVER you have, say, 200 users, and you do NOT feel like typing in each of their names and giving them each a quota, and they are not all members of a AD global group you could use or anything like that.  Hmmmmmm.... No worries, mate. We have a handy-dandy script that can do this for us. Now, this script was written a few years back by Tim Graves, one of our ZFSSA engineers out of the UK. This is not my script. It is NOT supported by Oracle support in any way. It does work fine with the 2011.1.4 code as best as I can tell, but Oracle, and I, are NOT responsible for ANYTHING that you do with this script. Furthermore, I will NOT give you this script, so do not ask me for it. You need to get this from your local Oracle storage SC. I will give it to them. I want this only going to my fellow SCs, who can then work with you to have it and show you how it works.  Here's what it does...Once you add this workflow to the Maintenance-->Workflows section, you click it once to run it. Nothing seems to happen at this point, but something did.   Go back to any share or project. You will see that you now have four new, custom properties on the bottom.  Do NOT touch the bottom two properties, EVER. Only touch the top two. Here, I'm going to give my users a default quota of about 40MB each. The beauty of this script is that it will only effect users that do NOT already have any kind of personal quota. It will only change people who have no quota at all. It does not effect the Root user.  After I hit Apply on the Share screen. Nothing will happen until I go back and run the script again. The first time you run it, it creates the custom properties. The second and all subsequent times you run it, it checks the shares for any users, and applies your quota number to each one of them, UNLESS they already have one set. Notice in the readout below how it did NOT apply to my Joe user, since Joe had a quota set.  Sure enough, when I go back to the "Show All" in the share properties, all of the users who did not have a quota, now have one for 39.1MB. Hmmm... I did my math wrong, didn't I?    That's OK, I'll just change the number of the Custom Default quota again. Here, I am adding a zero on the end.  After I click Apply, and then run the script again, all of my users, except Joe, now have a quota of 391MB  You can customize a person at any time. Here, I took the Steve user, and specifically gave him a Quota of zero. Now when I run the script again, he is different from the rest, so he is no longer effected by the script. Under Show All, I see that Joe is at 100, and Steve has no Quota at all. I can do this all day long. es, you will have to re-run the script every time new users get added. The script only applies the default quota to users that are present at the time the script is ran. However, it would be a simple thing to schedule the script to run each night, or to make an alert to run the script when certain events occur.  For you power users, if you ever want to delete these custom properties and remove the script completely, you will find these properties under the "Schema" section under the Shares section. You can remove them here. There's no need to, however, they don't hurt a thing if you just don't use them.  I hope these tips have helped you out there. Quotas can be fun. 

  Read the article

• 2.5D game development

  - by ne5tebiu

  2.5D ("two-and-a-half-dimensional"), 3/4 perspective and pseudo-3D are terms used to describe either: graphical projections and techniques which cause a series of images or scenes to fake or appear to be three-dimensional (3D) when in fact they are not, or gameplay in an otherwise three-dimensional video game that is restricted to a two-dimensional plane. (Information taken from Wikipedia.org) I have a question based on 2.5D game development. As stated before, 2.5D uses graphical projections and techniques to make fake 3d or a gameplay restricted to a two-dimensional plane. A good example is a TQ Digital made game: Zero Online (screenshot) the whole map is made of 2d images and only NPCs and players are 3d. The maps were drawn manually by hand without any 3d software rendering. As I'm playing the game I feel like I'm going from a lower part of the map (ground) to a higher one (some metal platform) and it feels like I'm moving in 3 dimensions. But when I look closely, I see that the player size didn't change and the shadow too but I'm still feeling like I'm somehow higher then before (I had rendered a simple map myself that I made in 3dmax but it didn't quite give the result I wanted). How to accomplish such an effect?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >