Search Results

Search found 20021 results on 801 pages for 'software engeneering learner'.

Page 583/801 | < Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590 | Next Page >

Remote Control Home PC from Corporate Work PC

- by muncherelli

Here is my situation: I am currently on a Windows XP workstation at work. I have an android tablet that I use to splashtop into my home PC. I would like to be able to use my work keyboard and mouse to control my home PC while I am splashtop'd into it using my tablet. My work PC is on a corporate LAN, and not on the same network as my tablet. The company I work for provides wifi for personal devices, but they are not accessable to the internal network. I thought about going the Synergy route, however that would require my home PC to be able to connect to my work PC which isn't really possible. The opposite would work though, if I could reverse connect the server to the client, but the Synergy software doesn't really support that. I do have a couple linux boxes running at home, so I can ssh into my home network and tunnel ports via SSH if needed. With what I have, how can I accomplish seamless keyboard and mouse sharing between my work PC and either my home PC or my android tablet?

Read the article
FTP error when doing file transfer

- by Ernie

I'm running vsftpd version 3.0.2 over FTPeS, and I'm having a bit of trouble with file transfers. It seems to work fine when I'm on the LAN, but not from an external IP address. I have the control port and data ports open on my server's software firewall and my router's firewall. When I'm using the service from an external IP address, it seems like sometimes a file transfer will complete, but it times out and I always get the client error: "426 Failure writing network stream". I've tried several clients. I'm thinking there is some sort of data sabotage either at the router or some server policy; maybe because I'm using passive ftp? Suggestions?

Read the article
Windows Storage Server 2003: Shadow Copy (VSS) enabled for volume, but Previous Version not visible

- by Jaap

Windows Storage Server 2003 We have Shadow Copy (VSS) enabled for one volume. However Previous Version tab is not visible on the server on properties dialogs on any file or folder on that volume. We don't want this tab to be visible on the clients, just on the server. I've checked the VSS settings and they're definitly enabled for the volume. I'm stuck! Do I have to install the client-software on the server? The folder \%systemroot%\system32\clients\twclient contains 3 empty subdirs (location copies from docs)...

Read the article
how to start with unmanaged vps?

- by GaVrA

Hello! I have a managed VPS, so whatever i need i can just ask my support, and they will do it for me. Now i plan to migrate to unmanaged VPS, so i need some guides, tips on how and where to start learning. I will have more specific questions once i start using it, but now i just need some general answers about this topic. Thanks. Update: Ok, i have decided to go for unmanaged VPS with cPanel. OS is CentOS-5. I contacted support only for some small(i think) things like creating new account in whm, some database importing, installing new software(rare)... What i will be using is apache, php, mysql. I think i will be able to cope with upgrading to new versions, so the thing that interests me the most is security i guess.

Read the article
Linux: disbale USB without disabling power

- by Ergot

TLDR I want toggle between the following usages of a usb-port via the terminal: use like a normal usb-port only supply energy to charge Story I recently got me something like a magna doodle that can save your drawings to pdf, which can be moved to your computer via usb afterwards. Now the thing is that you can't save anything while it's plugged in. Because it's the only way to charge it, it bugs me that I can't find a software solution and laziness I want to keep it plugged in and toggle the connection to the computer only when needed. I noticed that it's charging and usable when it is plugged in and the computer is shut down or suspened. So I guess that there's a way to do it. Tech info computer: ThinkPad X201 Linux Kernel: 3.14.5-1-ARCH "Magna doodle": Boogie Board Sync

Read the article
Discovery methods

- by Owen Allen

In Ops Center, asset discovery is a process in which the software determines what assets exist in your environment. You can't monitor an asset, or do anything to it through Ops Center, until it's discovered. I've seen a couple of questions about how to discover various types of asset, so I thought I'd explain the discovery methods and what they each do. Find Assets - This discovery method searches for service tags on all known networks. Service tags are small files on some hardware and operating systems that provide basic identification info. Once a service tag has been found, you provide credentials to manage the asset. This method can discover assets quickly, but only if the target assets have service tags. Add Assets with discovery profile - This method lets you specify targets by providing IP addresses, IP ranges, or hostnames, as well as the credentials needed to connect to and manage these assets. You can create discovery profiles for any type of asset. Declare asset - This method lets you specify the details of a server, with or without a configured service processor. You can then use Ops Center to install a new operating system or configure the SP. This method works well for new hardware. These methods are all discussed in more detail in the Asset Management chapter of the Feature Reference guide.

Read the article
OpenVPN Configuration - Windows 7 client & debian server

- by Guillaume

I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

Read the article
Visual annotator for large images

- by pts

I have a few hundred images of 30000 x 10000 pixels in size. Each image has lots of text (rendered as pixels) on it. I'd like to translate all text to another language. I speak both languages, and it's fine for me to translate each phrase manually. I need an image editor which can open these images quickly (faster than Inkscape, which needs about 60 seconds to open such an image), lets me zoom and rotate by 90 degrees, lets me erase (i.e. change the color of a selected rectangle to solid white), lets me add text, and lets me save the file as quickly as possible. I'd like to minimize the time I have to wait for the software to load, render and save images. Which is the best program for that on Windows? On Linux?

Read the article
Filtering serial port io

- by mr odus

I am currently working on a project where I communicate with hardware via a com port on its respective pc(win xp or 7) It is a fairly large project and sifting through the log file can be a bit of pain. This is my current setup. I use putty to do the actual serial communication, and write it to a log file. Then using MinGW Msys I filter it using tail -f "puttyLog" | grep -i "search term" Is there a better way to do this? I mean specifically filtering the input in realtime. Not that mine is terrible, but it still involves having to read from a log and sometimes there have been hangups where it will be delayed for a minute or 2. I have used software in the past with a main io window and then internal filter panels, but can no longer remember or find it.

Read the article
Is there a precedent for the license on a compiler restricting the kind of development you can use it for?

- by Jim McKeeth

It was recently let slip that the new EULA for Delphi XE3 will prohibit Client Server development with the Professional edition without the additional purchase of a Client Server license pack. This is not to say the Professional version will lack the features, but the license will specifically prohibit the developer from using the compiler for a specific class of development, even with 3rd party or home grown solutions. So my question is if there is a precedent of a compiler or similar creative tool prohibiting the class of work you can use it for. Specifically a commercially licensed "professional" tool like Delphi XE3. Also, would such a restriction be legally enforceable? I know there have been educational edition or starter edition tools in the past that have restricted their use for commercial purposes, but those were not sold as "professional" tools. Also I know that a lot of computing software and equipment will have a disclaimer that it is not for use in "life support equipment" or "nuclear power" but that is more of avoiding liability than prohibiting activity. Seems like I recall Microsoft putting a restriction in FrontPage that you couldn't use it to create a web site that reflected poorly on Microsoft, but they pulled that restriction before it could be tested legally.

Read the article
IRQ Conflicts Causing Video Card and Boot Problems?

- by sanpatricio

tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

Read the article
How to install a "virtual" network card on a virtual server?

- by vikp

Hi, We have purchased an unmanaged VPS windows hosting solution from one of the UK based companies. We have Windows Server 2008 Standard Edition. We need to install certain third party applications on that server. Unfortunatelly, one of the applications requires a MAC address to be present at all times - this is their way of making sure that software is not pirated (which it isn't). We have tried installing a virtual loopback network card, but this has brought the server down - i.e. we couldn't connect using remote desktop any longer. At the moment we are limited with what we can try. This is an unmanaged solution, therefore any support including restarts is rather costly. Are you aware of any low-risk solutions? Thank you

Read the article
Remember way back when we had a free decompiler?

- by Justin Jones

I, like probably so many of the rest of you, was mortified when Reflector was sold to RedGate. I knew where it was going. Suddenly you had to install it instead of just download and run it. I had a deep down feeling that one of the most useful tools in my arsenal was about to become a corporate product and no longer belong to the world of free tools. Sure enough it did. For a while now I’ve limped by without my favorite decompiler. This was made a little easier by the fact that you can now debug into the .net framework, but I still missed Reflector. JetBrains, makers of the superawesome and well worth the cost ReSharper (no it’s not free) have made their own decompiler that is comparable with Reflector, and it’s free. It’s still a corporate product, and JetBrains isn’t exactly known for making free software, but for now we have an option back on the table until some other industrious developer makes the next Reflector. dotPeek can be downloaded here. http://www.jetbrains.com/decompiler/

Read the article
How *NAT* was Implemented in Home Based Routers ? [closed]

- by Sumit Arora

Different Types of Home-Based Routers Exist, and those routers provide NAT Feature as well e.g; and most of them are Port Restricted. Q-1 : What kind of Base Softwares Manufactures use to develop NAT Functionality ? Q-2 : Is that Technology Proprietary ? Or some Open-Source used to develop that e.g; Firehol ? Q-3 : I am looking for a software which works exactly like a NAT,and by doing very basic configuration it should work either Symmetric NAT, Port Restricted NAT or Address Restricted NAT ? So that I can test some of my Network Application which are dependent on NAT via this way on same PC ? e.g; I can test my developed ICE Algorithms

Read the article
Emulating CP/M under Linux

- by gh403

I need to be able to run a very old piece of software -- the HI-TECH z80 C Compiler for CP/M. It has been released as freeware by HI-TECH. Alas, it only runs on CP/M. After a lot of Googling, I found a page of utilities for UZIX. One of those utilities is a script to abstract away the emulation of a CP/M machine, thus allowing you to use the compiler as you would any other UNIX program. The problem with this script is that it depends on their own CP/M emulator, which unfortunately will not compile on a modern (x64) system. My question: is there a usable CP/M emulator for Linux that could be used in a similar fashion? Specifically, I need to be able to somehow have it access files from the host system, a la DOSBox. I'm willing to rewrite a script (I don't have to re-use the UZIX one); I just need an emulator. Thanks for any help!

Read the article
Highly robust and scalable search server needed for managing and analyze files

- by ChrisBenyamin

Hi everybody, I am looking for a professional search server system with functionality, like e.g. solr http://lucene.apache.org/solr/ holds. Place of action should be a centralized location, whereon many hosts would request data. Furthermore the system should be extensible for implementing statistical procedures. (e.g. a kind of heatmap (or common diagrams) of a (or more) file(s) (which has a guid), that is spread on different hosts.) This software doesn't have to be opensource. thanks. chris

Read the article
My laptop can connect to every wireless network except fios

- by going crazy

I have always been able to connect to every wireless router secured or unsecured wep or wpa. I had Fios installed and could not connect. Verizon suggested it was my computer and gave me an outside wirless drive to use, it worked. I got rid of fios and went back to comcast and threw out the drive, but now 2 years later, I am sitting at my friends house haveing the same problem. My tech savy friend told me it is a firewall setting or something in my antivirus software, but I disabled them both and still nothing works........Funny it is only FIOS

Read the article
I can't program because the code I am using uses old coding styles. Is this normal to programmers? [closed]

- by Renato Dinhani Conceição

I'm in my first real job as programmer, but I can't solve any problems because of the coding style used. The code here: Does not have comments Does not have functions (50, 100, 200, 300 or more lines executed in sequence) Uses a lot of if statements with a lot of paths Has variables that make no sense (eg.: cf_cfop, CF_Natop, lnom, r_procod) Uses an old language (Visual FoxPro 8 from 2002), but there are new releases from 2007. I feel like I have gone back to 1970. Is it normal for a programmer familiar with OOP, clean-code, design patterns, etc. to have trouble with coding in this old-fashion way? EDIT: All the answers are very good. For my (un)hope, appears that there are a lot of this kind of code bases around the world. A point mentioned to all answers is refactor the code. Yeah, I really like to do it. In my personal project, I always do this, but... I can't refactor the code. Programmers are only allowed to change the files in the task that they are designed for. Every change in old code must be keep commented in the code (even with Subversion as version control), plus meta informations (date, programmer, task) related to that change (this became a mess, there are code with 3 used lines and 50 old lines commented). I'm thinking that is not only a code problem, but a management of software development problem.

Read the article
Using video ports 'backwards'

- by ACarter

If I want to connect my laptop, which has a VGA output, to a monitor, I plug a VGA cable into both ends. The output being my laptop, and the input the monitor VGA output sockets are the same as VGA input sockets however, so what if I want to use my laptop as the monitor, with the video being outputted from somewhere else? As I said, VGA's output is the same as input, so in theory, I have the hardware in my laptop to do this. But presumably I need some software. So can I use the VGA port on a laptop as a video input? (And also, can this be done with HDMI?)

Read the article
What rights does an employer have to the employee's computer?

- by Terrence Brannon

What access rights should an employee grant an employer for a work computer? For instance, let's assume that the business people come to the IT lab late at night for discussions with the CIO and they use my computer for reading email and general web surfing. In a sense, this means that they are taking full or partial responsibility for any security issues that crop up that get traced back to the employee's machine. Perhaps the proper way to provide a computer to an employee is to give him full and exclusive use of it while employed. Only supervised access (such as hardware/software maintenance) should be acceptable.

Read the article
I've inherited 200K lines of spaghetti code -- what now?

- by kmote

I hope this isn't too general of a question; I could really use some seasoned advice. I am newly employed as the sole "SW Engineer" in a fairly small shop of scientists who have spent the last 10-20 years cobbling together a vast code base. (It was written in a virtually obsolete language: G2 -- think Pascal with graphics). The program itself is a physical model of a complex chemical processing plant; the team that wrote it have incredibly deep domain knowledge but little or no formal training in programming fundamentals. They've recently learned some hard lessons about the consequences of non-existant configuration management. Their maintenance efforts are also greatly hampered by the vast accumulation of undocumented "sludge" in the code itself. I will spare you the "politics" of the situation (there's always politics!), but suffice to say, there is not a consensus of opinion about what is needed for the path ahead. They have asked me to begin presenting to the team some of the principles of modern software development. They want me to introduce some of the industry-standard practices and strategies regarding coding conventions, lifecycle management, high-level design patterns, and source control. Frankly, it's a fairly daunting task and I'm not sure where to begin. Initially, I'm inclined to tutor them in some of the central concepts of The Pragmatic Programmer, or Fowler's Refactoring ("Code Smells", etc). I also hope to introduce a number of Agile methodologies. But ultimately, to be effective, I think I'm going to need to hone in on 5-7 core fundamentals; in other words, what are the most important principles or practices that they can realistically start implementing that will give them the most "bang for the buck". So that's my question: What would you include in your list of the most effective strategies to help straighten out the spaghetti (and prevent it in the future)?

Read the article
JavaOne LAD Call for Papers

- by Tori Wieldt

JavaOne LAD Call for Papers closes next Friday, October 4. Here are Java Evangelist Steven Chin's top three reasons why you submit a session:1) Imagine a parallel world where Java is king. Where the government has mandated that all software be open-source and recognized Java as an official platform. That is exactly what happened in Brazil and it shows in all aspects of their country from government systems to TV standards.2) A JUG in Every Village - Brazil has the most user groups of any country in the world by a significant margin. "I've stayed after JavaOne to visit several cities and gotten a great audience whether it was a large city like Brasilia or Goiania, or a coastal town like Fortaleza, Salvador, or Maceio," Chin explains.3) A Community-Supported Conference - SouJava and the entire Brazilian user group community is active and involved with JavaOne Brazil, making it a really engaging regional JavaOne conference. Submissions should be: From the community, all proposals should be non-Oracle. Java-related topics (not technologies such as Flex, .NET, Objective C, etc... unless it's specifically a topic about how such things INTEGRATE with Java) Non-product pitches Interesting/innovative uses of Java Practical relevant case studies/examples/practices/etc. The call for papers will close on Friday, October 4, 2012 at 11:59 pm local time. We look forward to hearing from you!

Read the article
HP dv9000 Vista laptop won't boot from CD/DVD drive

- by ScottEdwards2000

My HP dv9000 Vista laptop recently got the BSOD with error 0x0000c1f5. The only way to fix this error is to be able to boot from CD/DVD and use some repair software I have. The problem is that the laptop REFUSES to boot from any CD/DVD I try. I've changed the boot order so the CD/DVD is first, and I can hear the drive spin up a bit upon power-up, but after a second, it spins down and then the laptop tries to boot from hard drive. Any ideas? (I've tried lots of CDs so it's not the media itself) Thanks much!

Read the article
Netgear VPN can't access specific server

- by Critologist

I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

Read the article
Video problem with Windows 7 Games

- by Jordan 1GT

I have a Dell xps M1330 which originally ran Vista, but I upgraded to Windows 7. When I try to run a Win 7 game like spider solitaire I receive the following message: "The game is running in software rendering mode. Hardware acceleration is either disabled or not supported by your video card driver which could slow down game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on." I confirmed that hardware acceleration is turned on. When I go to Dell's site, I'm told there is no later video driver. When I run the game it runs very choppy. I wouldn't care, but I loaded a .pptx file which is doing strange things in normal view and I suspect may be related to the same video problem. Any ideas?

Read the article

< Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590 | Next Page >