Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 124/215 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

  • What prevents Windows from entering standby?

    - by Arne
    Is there a tool or method to find out, what prevents Windows Vista 32 bit from entering the standby mode? My home pc is set to standby after a certain time of inactivity. But quite often it just stays awake and I have know idea why. I know of things that will keep it awake and already checked devices and network to no avail. I suspect there is some application or service that tells the os to stay active and I hope there is some tool to find the culprit.

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Is there some standard way to publish a calendar feed?

    - by CMP
    For a web application I am working on, I would like to be able to give the user a single url that they can enter into the calendar application of their choosing to have events from our application show up in their calendar. Most other sites I have seen that do similar things will have a one time download of an .ics file that can be imported. If I have to require my users to download a new file every time the schedule changes, it sort of defeats the purpose of having the feed at all. The calendar can change many many times a day. What I would really like is something like rss where their calendar program can look up a url and automatically see the most recent data. Does anything like this exist? Our main target is mobile devices, so it really should be supported by iCal and google Calendar. Anything else is bonus.

    Read the article

  • Is DevCon.exe still the best way to restart/power cycle USB ports after resuming from hibernation in

    - by ProfessionalAmateur
    I have a USB broadband card on my Windows 7 laptop. It loathes resuming from hibernation properly. Back in the XP days I would issue a call devcon.exe from the command prompt and restart the selected ports (Saves you having to manually unplug and plug back in your USB devices). Ive been trying this is Windows 7, but the UAC keeps getting in the way. I'll start a command prompt. Issue the devcon command, but UAC asks me if I really want to do this, when I click yes it opens a different command prompt and launches the command. After the command completed this new prompt window closes faster than the speed of light and I cannot see the results. So Im thinking there has to be a better way to do this in the Vista/Win7 world...?

    Read the article

  • Linux USB/Serial port won't create a tty device in /dev

    - by Dave
    I am connecting a USB to serial driver port to my system and I get about halfway to where I need to go. When it is plugged in dmesg indicates: <6>usb 2-1: new full speed USB device using sl811-hcd and address 4 <6>usb 2-1: configuration #1 chosen from 1 choice and lsusb Bus 2 Device 4: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 2 Device 1: ID 0000:0000 Bus 1 Device 1: ID 0000:0000 I get a series of usbdev2.4 (usbdev2.4, usbdev2.4_ep00, etc) devices in dev but no ttyUSB0 or anything that I can open with minicom. How do I get the system to create the /dev device? Thanks Dave

    Read the article

  • Desktop notifcations for IMAP subfolders in Outlook 2013

    - by hplieninger
    I use Outlook 2013 and an IMAP account for my mails. I have configured several filters (rules) directly in the webmail application of my provider in order to deliver certain mails, e.g., from my boss, into certain folders other then the "inbox". Note that I did not define any rules in Outlook itself and I also do not want to do so (because I want these mails being delivered into the folders not only in Outlook but also on other devices). The problem is that that I receive desktop notifications only for incoming mails in the main folder ("Inbox") but not for mails in any of the other folders.

    Read the article

  • Troubleshooting USB Hub on Snow Leopard MacOSX

    - by calmcajun
    I just bought a Belkin F5U701-BLK 7-port USB Hub and when I plug it into my iMac it does not seem to recognize it. Do I need to reboot my machine or install a driver? If I have to install a driver where do I get it from? I tried going to Belkin's website to search for drivers and and support info for the hub but I could not find anything. Edit: The USB hub is powering the other devices but my iMac does not recognize both hard drives.

    Read the article

  • Home Media Streaming Server

    - by sharjeel
    I'm looking for a Home Media Server which can stream videos to various devices including iPhone, iPad, Windows Machines, Android etc. I wouldn't want to install any client on any device; a web interface will be preferred. Also, it should be able to read videos of as many formats as possible and should stream by transcoding the resolution and format according to device's specifications. I have a fairly powerful machine on which I'm free to install Windows 7 or Linux. The streaming will be done over a g/n WiFi router or Ethernet locally. What is the suggested solution in my case?

    Read the article

  • How do I recover lost/inacessible data from my storage device?

    - by TomWij
    What steps can I take to try to recover lost or inaccessible data from any storage device? Answers: This applies to any main storage devices; eg. internal/external hard drive, USB stick, Flash memory. The most important thing is to STOP using it, any type of I/O can ruin your chances of a recovery. Click here in case you suspect corruption or bad sectors. Click here in case you suspect mechanical issues.

    Read the article

  • new ubuntu server installation - java server not receiving packets

    - by James
    I have developed a Java server which listens for UDP packets which come from mobile devices. At the moment, it works correctly if I run my Server on my windows PC. I can receive and respond to the UDP packets sent from my phone (over 3g, not wifi). However, I am trying to run the Server on a different computer which I found lying around my house. I have basically done a clean install of Ubuntu Server edition, updated it, installed the java run time environment and configured port forwarding to allow connections on the appropriate port. I have also tried to disable the firewall. The problem is, it doesn't appear as if the server is receiving any packets and I've exhausted my brain thinking on how to solve/debug the problem. Can anyone suggest to me what the problem might be? or more likely something I can do to help me find out more information about what is going wrong.

    Read the article

  • How to increase signal/range of your Wi-Fi antenna-less repeater/booster over the network?

    - by kenorb
    I've BT Home Hub in the upper flat (2-3 walls behind) and I'm using WPS Wireless-N Wifi Range Router Repeater Extender in my flat where I'm using my laptop. These are antenna-less devices. Are there any life-hack tricks to increase signal/range of my repeater without buying the new more powerful repeater? I've tried already to move my repeater closer to the ceiling or putting the aluminium foil underneath, but it didn't help. Are there any methods, specific plates or materials which can boost the signal? Specification: Model: WN518W2 Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER / 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm

    Read the article

  • "Always available offline" option missing on one network drive in Windows 7

    - by Rynardt
    My network setup at home has 2 network storage devices on the network. The one is for media content on a Popcorn Hour A-110 and the other is a D-Link DNS-320 in RAID 1 configuration for business files. When I access these network drives and right click a folder the following context menu appears for the A-110 device, but not for the D-link. I have tested this in both Windows 7 32bit and Windows Vista 64bit. In both instances the "Always available offline" option is only available for the A-110 storage device, and not for the D-link. How do I get this option for the D-link? Any advice or ideas are welcome.

    Read the article

  • Setting up dual wireless routers

    - by JasCav
    I have two wireless routers (one is the router supplied by Verizon - MI424-WR ActionTek and the other is DD-WRT Buffalo router). I want to set them up so that I have the second router (Buffalo) on its own subnet and two SSIDs so I can put different devices on different routers and so I can put my web server on the first router and put most of my other computers behind the second router for a little extra protection in case of a compromise. From my understanding, I have to hook the two routers together so that the LAN from the Verizon router plugs into the WAN port of the Buffalo router. This is where I get stuck. What settings do I need to look for to setup the Buffalo on its own subnet? Do I need to do anything with the Verizon router, or are the configuration changes done to the Buffalo?

    Read the article

  • WesternDigital SmartWare - still problematic?

    - by FrustratedWithFormsDesigner
    I've seen a lot of bad press on WD SmartWare (I think it comes on most WD backup devices now, such as their MyBook product line), mostly related to how it's impossible to remove properly or replace. There are allegations (I couldn't tell how true they were) that it has/is a rootkit, as well. Most of the articles are a couple of years old, so I'm wondering if SmartWare is still just as problematic as it was. Does it still have a nasty rootkit reputation and should I just stick with the Windows 7 built-in backup system, or is the current SmartWare generation improved and better behaved?

    Read the article

  • Why Standards Place Limits on Data Transfer Rates?

    - by Mehrdad
    This is a rather general question about hardware and standards in general: Why do they place limits on data transfer rates, and disallow manufacturers from exceeding those rates? (E.g. 100 Mbit/s for Wireless G, 150 Mbit/s for Wireless N, ...) Why not allow for some sort of handshake protocol, whereby the devices being connected agree upon the maximum throughput that they each support, and use that value instead? Why does there have to be a hard-coded limit, which would require a new standard for every single improvement to a data rate?

    Read the article

  • Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

    - by gil b.
    Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

    Read the article

  • Replacing sick NTP server source and re-synching (with internal time currently 2 minutes late)

    - by l0c0b0x
    One of the external NTP servers (the primary one--currently) we're using as source seems to not be responding to NTP calls. Unfortunately, on our core router (Cisco 6509), the NTP functionality hasn't switched to the secondary NTP external server as it was expected. As a result, our core router which is pretty much our main internal NTP source is 2 minutes late. I'm planning to fix the external router issue by making the external NTP source be the one currently working. I'm wondering, how much will a 2 minute change affect my users and services? Specially since these days, we're heavily relying on certificate-based authentication. We're a Windows/Cisco shop. Internal NTP setup: [Core Router 1 / Cisco 6509]: looking out to two external NTP servers (in which the primary one is not responding to NTP calls) [Core Router 2]: Synching with Core router 1 (primary), working external router (secondary) [Other Cisco network devices]: Synching with Core router 1 (primary), core router 2 (secondary) [Domain controller(s)]: Synching with Core router 1 [All windows clients/servers]: Synching with domain controllers

    Read the article

  • Win 7: Share internet connection via Ethernet and WiFi

    - by Anvaka
    I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

    Read the article

  • Win 7: Share internet connection via Ethernet and WiFi

    - by Anvaka
    I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

    Read the article

  • What is automatic service location on the network?

    - by Roman
    I know that zeroconf does automatic service location on the local network. But what does it mean? For example there is a printer (printing is the service that it does). This printer choose randomly an IP for itself. It asks other devices if this IP is already occupied. If not, the printer occupies this IP. Then printer says to "everybody" that "printing" service is associated with this IP. Is it "automatic service location"? Or I got something wrong?

    Read the article

  • using nmap to guess remote OS and probe service details on a single port only

    - by WoJ
    I am looking at scanning with nmap a large network in order to identify the OS of devices (-O--osscan-limit) probe for details of a service on a single port (I would have used -sV for all open ports) The problem is that -sV will probe all the ports (which I do not want to do for performance reasons) and I cannot use -p to limit the ports to the one I am interested in as this impacts the OS fingerprinting. I could not find anything in the manual to limit the service probing. Thank you for any ideas (including other approaches outside of nmap, though I would prefer to stick to nmap)

    Read the article

  • wireless repeater vs wireless bridge?

    - by Kossel
    Scenario: I have a ADSL modem inside the studio which is connected with some wired/wireless devices. but when I'm in the backyard with my laptop the wireless signal is very poor, so the connection is very unstable. I have an old belkin wireless router and I read that it can be useful in this scenario. after some search, it's compatible with DD-WRT, and seems setting it both wireless repeater or wireless bridge can do the job. but which is better for speed and stability or for my purpose they are the same? wireless repeater wireless bridge

    Read the article

  • Webcam microphone input in Gnome/pulseaudio

    - by sdaau
    Just got a "Trust" webcam, which gets recognized on my Ubuntu Lucid. It has a built in microphone - which also gets recognized - however, I cannot really get it to act as the system microphone input? Here are some screenshots of what is shown by gnome-volume-control: The default window shows Trust webcam - which has two profiles: "Analog Mono Input" and "Off" - of course, I have it on "Analog Mono Input": However, on the "Input" tab - there is no matching "device for sound input" - neither a matching connector: Then I installed pavucontrol - but that doesn't show that much more; it tells first that gnome-volume-control reads from "Internal Audio Analog Stereo": Then in "Input devices" tab, there is again nothing resembling the mic input from webcam: Finally, under "Configuration" tab, the "Trust" webcam shows, but even if its profile is on "Analog Mono Input", nothing much happens:   So, does anyone know how I could get this webcam microphone to be recognized as the system input? Many thanks in advance for any answers, Cheers!

    Read the article

  • What is the best solution for letting both Macs and PCs access digital images and videos on a networ

    - by Gertbert
    I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >