Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 122/215 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Broadcom bluetooth driver for Windows 7 on MacBook Pro

  - by Sergiy Byelozyorov

  I have installed Windows 7 on MacBook Pro using BootCamp. Usually when turning my Bluetooth headset on and trying to pair it with Mac for the first time, Windows would fail to install drivers and open solution in Action Center, which suggests to download the driver from the Broadcom webpage. This worked before and drivers would install and work. However now, when I start driver installer, it would get stuck at "Detecting Bluetooth Device" stage. Below the steps there is also a warning with text, which says "Please plug in or turn ob your Bluetooth device". This is how the installer looks like when it's stuck: I have tried turning my headset on/off, bringing it into pairing mode, installing/uninstalling device to/from the Bluetooth Devices. None of these worked. Any ideas?

  Read the article

• Linksys EA3500 : use WAN port as WAN + LAN possible?

  - by Dough

  I'm waiting for deliver of a Linksys EA3500 router. I was wondering if it was possible to get the WAN port act as normal WAN port (Internet IP) + LAN switch ? My problem is that my Internet box is in a room with NAS and PC, and the router will be in another room with TV, PS3 and PC. The Internet box have a 4 port Gigabit switch so one cable will plug from there to the router's WAN in the other room. The router will get the Internet IP from the Internet box, but will it be possible to have private network through this link too ? I could have a first network between the Internet box and the router, and another network form router and devices but that will do double NAT for nothing... Thanks for reading me and your help !

  Read the article

• Cannot access SWITCH thru VPN

  - by MadBoy

  I've VPN connection set up that i connect to company with. I can connect to all devices (other switches, routers, servers from same subnet with same settings just diffrent ip) but I can't connect to NetGear Router GS748Tv3. Settings on switch: IP address 192.168.1.8 Subnet mask 255.255.255.0 Default gateway 192.168.1.1 Management VLAN ID: 0 (1 - 4094 or 0) (0 means all VLANs) Switch has 2 VLAN's configured 1 and 2. I can access this switch thru VPN if i log in to server and from server to switch but this is a little bit slower then normal way. Anything I'm missing?

  Read the article

• How to automatically show USB camera or memory stick contents in Icewm?

  - by darenw

  I normally use a very lightweight Linux setup. No desktop like Gnome or KDE, just Icewm as the windows manager and nothing else that normal users might consider essential. Well, I do need a file manager - I use Thunar. Recently I've been trying Gnome. Whenever I shove a memory stick into a USB port, or connect my digital camera, it can automatically pop up a file manager showing all the goodies on that device. KDE does this too. I like this. Although quick at the command line, I like not having to go sudo to mount the device and all that. If I want to stick with a lightweight setup using Icewm+Thunar, is there something non-huge I can install to make external devices fire up a Thunar window, or otherwise make access to the contents brainlessly easy?

  Read the article

• Unable to sync the Zune software with my HTC HD7

  - by Varpi

  I have a brand new HTC HD7 with Windows Phone 7, with no Software installed. I am running on Windows 7 64 bit. Whenever I try to sync my Mobile Device with Zune- I get this message: Can't connect to your phone. Disconnect it, restart it, then try connecting again I've downloaded latest Zune software and all updates. I don't have any certificates on my personal certificates. My phone is listed under Portable devices in Device manager (It shows as phone with driver version 4.7.965.0). I've restarted both my computer and the mobile device few times. I tried unlocking the device during the Zune sync Any ideas as to how I can sync my phone ?

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

  - by Adam Ryczkowski

  I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

  Read the article

• Logitech M185 Wirless Mouse issue

  - by Elliot Harrison

  An issue with a Logitech M185 mouse today. A user is unable to use the device. The device works perfectly fine on my PC (It appears as HID-compliant mouse), but not on her laptop. It does not appear in her device manager on the 'Mice and other pointing devices' section. I did notice an unknown device in the Universal Serial Bus Controllers section, but when I try to update the driver, it says it has the most up to date driver. We've tried plugging in the dongle in multiple USB slots but no luck. Any advice? It's a HP 620 Laptop on Windows 7. Thank you :)

  Read the article

• Just bought Logitech G35 headset, want to enable/disable headet in one action

  - by Roy Rico

  Hello, Just bought Logitech G35 USB headset, want to enable/disable headet in one action. I have windows 7 64 bit, and currently, to switch from the headset to my spakers (or vice versa) without unplugging the headset, i have to go thru this steps: right click on the sound icon select "sounds" select the "Playback" tab right click headset and hit enable right click speakers and hit disable same steps when wanting to switch back I have to disable the devices, because not all of the programs which are outputting sound will switch immediately if I just set either device to default. I am looking for this to be a single action (either a batch script or a windows shortcut to some action with parameters?) Thanks!

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

• Laptop stopped recognizing USB hard drive

  - by vahokif

  Hi, My Packard Bell EasyNote TX86 laptop stopped recognizing my 1 TB Toshiba Store Art hard drive. It worked fine until now, and it still works on other computers. Other USB devices (including storage) work, and I've tried plugging it in every port, to no avail. When I plug it in it spins up, but Windows doesn't react at all (it's not in disk management), Linux doesn't write anything in dmesg and I can't see it in BIOS setup. I didn't use it at all today, apart from plugging it into a freshly-installed Windows 7 machine once (where it worked). What can I do? Which device is to blame here? EDIT: One more thing. I unplugged the drive while the laptop was hibernated. Google says this might be the problem and it might have something to do with resetting the USB Host Controller.

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Can I change the image associated with my computer when it's sharing as a media server?

  - by animuson

  I currently have my computer setup to share its videos, music, and pictures as a media server so I can easily access all of my stuff from my PS3 and play it on my TV (since I can't connect my computer directly to my TV). However, my dad also has his laptop setup as a media server, for whatever reason, and both of them use the same "Windows Media Player" icon in the list. It's not a huge issue, but I was wondering if it was possible to somehow change what icon gets sent out by your computer to other devices when it's acting as a media server, and how?

  Read the article

• In TCP/IP terms, how does a download speed limiter in an office work?

  - by TessellatingHeckler

  Assume an office of people, they want to limit HTTP downloads to a max of 40% bandwidth of their internet connection speed so that it doesn't block other traffic. We say "it's not supported in your firewall", and they say the inevitable line "we used to be able to do it with our Netgear/DLink/DrayTek". Thinking about it, a download is like this: HTTP GET request Server sends file data as TCP packets Client acknowledges receipt of TCP packets Repeat until download finished. The speed is determined by how fast the server sends data to you, and how fast you acknowledge it. So, to limit download speed, you have two choices: 1) Instruct the server to send data to you more slowly - and I don't think there's any protocol feature to request that in TCP or HTTP. 2) Acknowledge packets more slowly by limiting your upload speed, and also ruin your upload speed. How do devices do this limiting? Is there a standard way?

  Read the article

• Backup drivers for a device in Windows 7

  - by Moses

  If I can't find a driver on the internet when I prep for a reinstall of Windows 7, I figure if the driver is already installed, why not back it up and reinstall later? The only method I know of is going through Device Manager Device Properties Driver Details. This gives me a nice list of all the files, but then I need to go manually retrieve all of them. For devices with a lot of driver files, this is inefficient. Is there a better way to accomplish this?

  Read the article

• Why does the EFI shell not detect my Windows DVD?

  - by Oliver Salzburg

  I'm currently looking into (U)EFI for the first time and am already really confused. I insert the Windows Server 2008 R2 Enterprise disc into the DVD-ROM and boot into the EFI shell. The shell will automatically list all detected devices, which are: blk0 :CDRom - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master)/CDROM(Entry0) blk1 :BlockDevice - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master) To my understanding, it should have already detected the filesystem on blk0 and should have mounted it as fs0. Why is that not happening? If I insert a USB drive, it gets mounted just fine. The board is an Intel S5520HC in case that makes a difference.

  Read the article

• When connected through a router, a new gateway appears, and I lose my internet connection.

  - by idan315

  I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. (Just to be clear: the computer using Windows XP can connect to the internet without any problem). This entire question is about the PC using Windows 7. The only symptom of this problem is that when I see my network devices, in addition to my router (which appears as "Network 4", or something of the sort), I also see an "Unidentified Network". When using ipconfig to check the problem, I see a second gateway, with the IP 0.0.0.0, in addition to the IP of my router.

  Read the article

• basic device that can connect to internet

  - by Hellnar

  Hello, I am looking for a cheap solution to my problem: I need to find either an already existing common device (that is used in restaurants, bars clubs) or a cheap new device that I will distribute to those places, which can connect to internet (via the already existing ethernet or wireless based internet) and do HTTP request/receive response and retrieve information ? (For instance can a POS device connect to internet?) For a project, I need to do identity validation on several restaurants and bars and not all of them have computers. So I will be giving "cheap and easy to use devices" and non-IT personal can use it to do http request to my server and get response. All I can think of is Cell phones and SMS.

  Read the article

• Excel - graphing mean and standard deviation

  - by joe_shmoe

  Hi all, I have measurements for multiple devices, and have their mean and sd values. I would like to produce a chart that would show these values, and I think the best would be if I could have something that looks like a bar chart(-ish) - the device names in x axis, values in y axis, and for each device to have a 'floating' bar that would represent values (mean - sd :: mean + sd), and some marker in the middle to show the actual mean value. is it doable? or would you suggest some other chart? Thanks a lot

  Read the article

• How to disable internet access at night on the router?

  - by izb

  I have an internet connection that I'd like to be enabled only during the day. With multiple household internet devices, this would need to be something disabled at the level of the router. I don't believe the router offers this sort of functionality, but I'm reasonably familiar with setting up web servers and the like, and I'm wondering if I can set up some sort of proxy server on the internet that the router must go through and have that proxy only active at certain times of day. It's a bit vague I know, but is something like this even possible? If not, are there other solutions to the problem?

  Read the article

• How to Shutdown PC by Pressing Power Button

  - by AgA

  I always Hibernate my PC. Sometimes when I boot, it does not recognize the mouse/keyboard or any USB devices. I've also setup it to go in sleep in 5 minutes. In that case I can't restart the PC so that USB starts working. When I press the Power button then it starts shutdown but asks confirmation twice one is for shutdown by force confirmation and then there is one more. When my USB is disabled I can't input these options. So I switch off the power. What I want is that upon pressing Power Button it should at once start shutdown without asking any more confirmations System details: Win-7 Home Premium 64 bit Intel i3 530 Asus P montherboard EDIT: It is Desktop PC

  Read the article

• Backup database from default (unnamed) sql server instance with powershell.

  - by sparks

  Trying to connect to an instance of SQL Server 2008 on a server we'll call Sputnik. There are no firewalls in between the two devices. Right now I'm just trying to list databases [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoExtended") | Out-Null [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.ConnectionInfo") | Out-Null [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoEnum") | Out-Null $servername = "Sputnik" $remoteServer = New-Object("Microsoft.SqlServer.Management.Smo.Server") $servername $remoteServer.databases The following error message occurs: The following exception was thrown when trying to enumerate the collection: "Failed to connect to server Sputnik.". At line:1 char:15 + $remoteServer. <<<< databases + CategoryInfo : NotSpecified: (:) [], ExtendedTypeSystemException + FullyQualifiedErrorId : ExceptionInGetEnumerator

  Read the article

• How to crop black bars or zoom on Youtube and other Video websites?

  - by cloneman

  Many desktop software (VLC, MPC) and have an option to 'zoom in' , 'crop black bars', or crop to a specific aspect ratio. How can we do this in Fullscreen on Youtube or other flash Video sites? I am the viewer, NOT the video's creator/publisher. iOS Can do this (double tap to zoom, which removes black bars, zoom depth not configurable). afaik, Desktop computers (and android devices), cannot do this on the fly. The only 'workaround' I've found is F11 and zooming of the entire web page - basically a fake full screen and zooming the web page beyond the screen size. Use Case: watching 4:3 flash videos from the web on a widescreen monitor. Looking for all creative solutions, including any software that accesses YouTube without using a web browser.

  Read the article

• Question about the linux root file system.

  - by smwikipedia

  I read the manual page of the "mount" command, at it reads as below: All files accessible in a Unix system are arranged in one big tree, the file hierarchy, rooted at /. These files can be spread out over several devices. The mount command serves to attach the file system found on some device to the big file tree. My questions are: Where is this "big tree" located? Suppose I have 2 disks, if I mount them onto some point in the "big tree", does linux place some "special marks" in the mount point to indicate that these 2 "mount directories" are indeed seperate disks?

  Read the article

• Watch TV/recorded shows from my Comcast cable box on my Mac?

  - by IVR Avenger

  Hi, all. I've got a MacBook that's about three years old (it's the first generation that had a dual core CPU), running Leopard. I've got a Comcast DVR/HD Cable box. Is there something that I can install in between these devices that will let me watch TV from the Cable box on the Mac's display? The Cable box is in one room, but my tush and the Mac are in the other (fixing code on another machine that can't be part of the equation). Any ideas? Thanks! IVR Avenger

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >