Search Results

Search found 9381 results on 376 pages for 'wireless driver'.

Page 18/376 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • No firmware found for b43 wireless controlloer (BCM4318) on a Dell Latitude D610

    - by Stanton.Sculpture
    Trying to get my 03:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) working. I just reformated and installed 12.04 on this old Windows XP machine, and I don't know where to get the firmware for this. This is what I got when I typed sudo lshw -c network: http://pastebin.ubuntu.com/1041161/ Also, when I go to additional drivers in the system settings, no proprietary drivers show up. Any help I can get on this would be Great, Thanks!

    Read the article

  • installed ubuntu 12.04 and no wireless internet at all

    - by Memoq
    I'm extremely new to ubuntu. I installed 12.04 on a laptop that had no os. I've tried following these forums to troubleshoot my internet problems only to be confused by all the steps. I need help. I'm willing to follow any instruction as long as they make sense. Any help would be nice. The equipment i have is a Dell inspiron 1100 laptop wireless card is D link 2.4 dwl -g650 product ar5212/ar5313

    Read the article

  • Looking for wireless product

    - by Belinda
    Can anyone suggest some options for me? I would like to provide our maintenance department with a view-only monitor showing our common Outlook calendars. I'm guessing it would have to have some touch-screen capabilities since they would need to be able to toggle between several calendars. We do have a cobbled together, building wide wireless network. I don't want anything that needs to be "wired or cabled" just plugged into a power source and mounted on the wall.

    Read the article

  • Ubuntu, No wireless networks found after correctly installed madwifi

    - by Peter
    Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

    Read the article

  • How do I install a driver for an Atheros AR9285?

    - by Fernando
    How to install the driver for Atheros AR9285 in Ubuntu 11.10. Still no package for 11.10 according to this https://help.ubuntu.com/community/WifiDocs/Device/Atheros/AR9285 Here is the output of the commands marc@fer-VPCYA1V9E:~$ sudo lshw -class network *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 4c:0f:6e:d6:65:cc width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.0.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:d3400000-d340ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: 54:42:49:a2:1f:bc capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:d2400000-d243ffff ioport:1000(size=128) And the second command marc@fer-VPCYA1V9E:~$ rfkill list 0: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no 4: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Is there a way to make it work?

    Read the article

  • Cannot find wireless driver for HP laptop

    - by rodey
    I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

    Read the article

  • Intel Dual Band Wireless-AC 7260 keeps dropping wifi

    - by Rick T
    My wifi Intel Dual Band Wireless-AC 7260 keeps dropping wificonnection drops and the network to which I was connected disappears from the list of available networks in network manager. The only way to fix it is to disable wifi and re-enable it How can I fix this. I'm using ubuntu 14.04 64bit. It mostly drops connections on the 5ghz network. My other devices don't drop connections over wifi. see logs and versions rt@simon:~$ uname -a Linux simon 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux rt@simon:~$ rt@simon:~$ dmesg | grep iwl [ 3.370777] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.381089] iwlwifi 0000:03:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm [ 3.414637] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 3.414695] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.414913] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S rt@simon:~$ cat /var/log/syslog | grep -e iwl -e 80211 | tail -n25 Aug 14 08:13:02 simon kernel: [ 3.452780] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:13:02 simon kernel: [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Aug 14 08:13:06 simon NetworkManager[1125]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi) Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): using nl80211 for WiFi device control Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Aug 14 08:13:06 simon kernel: [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:13:06 simon kernel: [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:14:18 simon kernel: [ 81.230162] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:14:18 simon kernel: [ 81.232330] cfg80211: World regulatory domain updated: Aug 14 08:14:18 simon kernel: [ 81.232332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:14:18 simon kernel: [ 81.232333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232334] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232335] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:02 simon kernel: [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:02 simon kernel: [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:18 simon kernel: [ 621.223905] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:23:18 simon kernel: [ 621.228945] cfg80211: World regulatory domain updated: Aug 14 08:23:18 simon kernel: [ 621.228950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:23:18 simon kernel: [ 621.228954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228956] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228961] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228963] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

    Read the article

  • Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

    - by Lucas
    I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

    Read the article

  • Why is my wi-fi STILL not working?

    - by Alex Grantham
    i have 10.10, and have gotten ndiswrapper and the proper driver, it installed properly, but still my wi-fi isn't working. In terminal it say its disabled, but its enabled EVERYWHERE... even when I exited windows. Right now i'm left to use an Ethernet cord and a second computer... please help. My windows isn't in good condition and I would love to switch to Ubuntu... but wi-fi is definitely a need. FYI, I have a toshiba satellite a505d-s6958 with the realtek rtl819[somehting something something]... but I have the driver from their webisite... I really just need to get my wifi to work

    Read the article

  • RTL8192SU-based Wi-Fi adapter disconnects permanently

    - by leventov
    I've already tried all possible (http://ubuntuforums.org/showpost.php?p=10129571&postcount=43) solutions, no progress. I'm in despair. In Windows (on the same machine) this adapter works stably. Device: Trendnet TEW-649UB. System details: Ubuntu 11.10; leventov@leventov-ubuntu:~$ uname -a Linux leventov-ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux leventov@leventov-ubuntu:~$ lsusb ... Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter ... leventov@leventov-ubuntu:~$ dmesg | grep 8712 #current driver [ 8.146510] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.147113] r8712u: DriverVersion: v7_0.20100831 [ 8.147124] r8712u: register rtl8712_netdev_ops to netdev_ops [ 8.147127] r8712u: USB_SPEED_HIGH with 4 endpoints [ 8.147478] r8712u: Boot from EFUSE: Autoload OK [ 8.551272] r8712u: CustomerID = 0x0000 [ 8.551275] r8712u: MAC Address from efuse = 00:14:d1:6c:52:19 [ 8.551625] usbcore: registered new interface driver r8712u [ 9.501351] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 10.160471] r8712u: 1 RCR=0x153f00e [ 10.161241] r8712u: 2 RCR=0x553f00e leventov@leventov-ubuntu:~$ lsmod | grep 8712 r8712u 189049 0 t

    Read the article

  • Ubuntu 11.10 to 12.04 results in loss of N network capability - how to restore?

    - by user74273
    On Ubuntu 11.10, I had zero issues with N network detection and speed. I cannot remember whether the old driver was iwlagn or iwlwifi. This was with Ubuntu repository Linux kernel 3.0.0-22. Upon upgrading to Ubuntu 12.04, iwlwifi is the available driver and while it detects N networks, upon connection, the speed is cripplingly low and DNS look-ups do not occur (impossible to browse). This is with Ubuntu repository Linux kernel 3.2.0-26. Please note that the 11n_disable flag for the iwlwifi module cannot work for me as I require N network access. Is there another solution? Perhaps, is there a way to easily patch the new kernel with the old wireless module (just copy-and-paste the iwlagn module into the new kernel source and re-compile)? Relevant hardware specs: Dell Inspiron N5110 Network Adapter: Intel® Centrino® Wireless-N 1030

    Read the article

  • ATI proprietary driver performance?

    - by Axel
    I'm about to (at least, want to..) buy a laptop with an ATI Radeon HD 4250, and I haven't a good opinion on ATI's drivers. How is the actual performance of the open/proprietary driver (currently I have nVidia, and I'm very satisfied)? The intended use for the laptop is: watching videos, programming in Java/PHP/maybe Qt... but, I like to know if Compiz runs well. Yes, I'm a hardcore (?) programmer that uses Compiz. :P Someone has this GPU? Experiences? Thoughts? Thanks! :D

    Read the article

  • How to set wifi driver settings to prefer 5 GHz channel above 2.4 GHz

    - by Wouter
    Currently I'm in a new building of my university. In this building my wifi often breaks down and then restores connection again. This is really irritating since it happens a lot. Now as a coincidence there were some tech guys running around here and where asking everyone if the wifi was doing fine. I told them that my wifi tears down all the time and then reconnects. They figured out that my wifi is switching all the time between the 2.4 GHz channel and 5 GHz channel. They asked me if I could acces the driver settings of my wireless card. Unfortunately I don't know how to do this is in either Linux or Windows. And unfortunately again they only knew the windows solution xD. So I hope somebody can tell me how I tell my wifi that it should stay on the 5 GHz network and not disconnect and switch to the 2.4 GHz channel?

    Read the article

  • Wireless device not working...supposed problem with b43 driver

    - by Francesco
    I just installed Xubuntu 11.10 onto an old Acer Aspire 3003wlmi. The wireless card is not working. I did all the passages illustrated in the troubleshooting guide but I came up with nothing. It says that driver is b43, but when I booted from the installation cd I noted down some messages saying "Error - b43/ucode " and "Error b43/phy_...something". I had Ubuntu 10.10 installed before and I remember I had similar problems but I don't remember how to solve it. If you please can help me. thanks a lot. Francesco

    Read the article

  • Broadcom STA driver doesn't work well with BCM4313

    - by Oli
    Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

    Read the article

  • Ubuntu 12.10 64bit fresh install, wireless issue!

    - by Dave
    Just installed a fresh Ubuntu 12.10 64bit on my laptop, run the update manager, restarted and suddenly I can't use my wifi anymore. Ubuntu software center installed automatically the wifi additional driver as you can see in my screenshot. If I mark the option "Do not use the device" and apply changes, restarting Ubuntu my wifi is back and I can use it. If I run iwconfig my terminal is showing this Now if I use Ubuntu for more than 20 minutes surfing the web my wifi it keeps to be connected but I don't receive any signal from it. Any page I try to open it simply don't open (just waiting icon). If I disconnect my wifi and connect it again, same issue, it doesn't work. The only way to make it work again is to restart Ubuntu. And the same story it happens again after aprox. 20, 30 minutes. WIFI device details: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Thanks, Dave

    Read the article

  • Ubuntu won't use my nvidia driver

    - by Spencer
    I'm running Ubuntu 12.10 on a laptop that has both Intel Integrated Graphics and an Nvidia Geforce 540m. I installed the drivers properly, but I can't manage to actually use them. I'm stuck in 640x480 resolution and the drivers aren't detected anywhere. Each time I open the Nvidia settings menu it says: "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (Just run 'nvidia-xconfig' as root), and restart the X server." ^Doing so does not help. Anybody have any ideas?

    Read the article

  • Could not connect to wireless unitl reboot (nl80211)

    - by user107410
    I'm using Samsung NP900X3C. I have problem with occasionally connecting to WIFI, with Ubuntu 12.10. Sometimes my computer could not connect to WIFI "blab", neither after reboot computer. Only solution is to restart WIFI hotspot. It's public WIFI, used by many users, that don't have that problem. My /var/log/syslog: Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.908610] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:39 k15 kernel: [ 8.915032] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.916753] wlan0: authenticated Nov 12 10:09:39 k15 kernel: [ 8.916839] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.386212] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.389114] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:42 k15 kernel: [ 12.391021] wlan0: authenticated Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:42 k15 kernel: [ 12.391332] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:46 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) and after restart WiFi, I could connect: Nov 12 10:11:51 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: inactive -> scanning Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 kernel: [ 144.445154] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.453994] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:11:55 k15 kernel: [ 144.455860] wlan0: authenticated Nov 12 10:11:55 k15 kernel: [ 144.458681] wlan0: associate with 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:11:55 k15 kernel: [ 144.462799] wlan0: RX AssocResp from 64:70:02:89:7c:d7 (capab=0x431 status=0 aid=9) Nov 12 10:11:55 k15 kernel: [ 144.486368] wlan0: associated Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Associated with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.487435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> associated Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake This problem is appearing regulary. My WiFi device control is nl80211. Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): using nl80211 for WiFi device control Nov 12 10:09:32 k15 NetworkManager[1004]: <warn> (wlan0): driver supports Access Point (AP) mode Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): now managed Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): bringing up device.

    Read the article

  • Install reliance Driver software in ubuntu 14.04

    - by A Umar Mukthar
    I'm Using Huawei ec 150 dongle. I need to install driver software It is quiet a big task for begineers in linux. So i took this matter over here. EDIT Output of lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 12d1:140b Huawei Technologies Co., Ltd. EC1260 Wireless Data Modem HSD USB Card Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 002 Device 002: ID 046d:c31d Logitech, Inc. Media Keyboard K200 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Read the article

  • Wireless speed drops over time and doesn't get up if not reconnected

    - by Vili Lehto
    I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

    Read the article

  • Cisco Linksys AE2500 wireless adapter not working

    - by makuto
    I have a Cisco AE2500 I've used with my laptop to get internet. I had to install the drivers by following this forum: http://ubuntuforums.org/showthread.php?t=1805830 But now the blue light on the adapter doesn't turn on at all, but ndiswrapper reports it is connected. I have no connection to the internet on my laptop, and the adapter doesn't show it's blue light on any of the USB ports of my computer or on the 4 port hub I have. Is there some way I can reset something so that the blue light will show again? I'm using Ubuntu 11.10 on a Dell Latitude D505 laptop. EDIT: I deleted and reinstalled the same exact driver and everything worked again.

    Read the article

  • wireless driver error after install

    - by James
    after following this command to update wifi drivers:1- Boot into Ubuntu 2- Open a terminal by pressing Ctrl+Alt+T 3- Type in the following (verbatim!) sudo apt-get update && sudo apt-get upgrade press Enter, the command will prompt for your password (the one you use to login into Ubuntu), type it and press Enter. Wait for it to finish updating your system. Now type: sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer Wait for the command to finish installing the driver, when done restart your computer. i get a message after the first command when installing has done saying not enough space so it aborts! what do i do to fix this

    Read the article

  • Installing wireless drivers without internet access [closed]

    - by Lucas Jones
    Possible Duplicate: How can I install and download drivers without internet? (This is related to my other question; my approach there didn't work.) My friend has (I'm quite sure) a Broadcom wireless chipset. However, he doesn't have any wired internet access on the machine, so his only option is to boot into Windows (he is using Wubi) and download packages there. This means we can't use the Hardware Drivers dialog to install the drivers. He can't fetch the repository information, so the Broadcom driver packages aren't showing up in Synaptic. Is there any way to get Wi-Fi working?

    Read the article

  • how to find available wireless networks

    - by Quinn
    I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >