Search Results

Search found 24814 results on 993 pages for 'linux distro'.

Page 254/993 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• Build of expect v5.43 fails with Tcl v8.5.8

  - by E Brown

  Hi, I'm trying to build "expect" from source v5.43, using Tcl built from source v8.5.8 on Redhat Linux. Tcl built fine, but my attempt to build expect fails. I run configure, then make, which gives me the error: `TCL_REG_BOSONLY' undeclared when compiling exp_inter.c. I did some digging around, and found the TCL_REG_BOSONLY value defined in Tcl file tclInt.h, but there is no #include for that in the exp_inter.c file. My question is, can "expect" be built from source with Tcl version 8.5.8, or does it require an earlier version? Version 5.43 is the latest for "expect" that I can find, and the current Tcl version is 8.5.8, but something doesn't seem compatible between the two. Any help appreciated.

  Read the article

• Is it my motherboard?

  - by jarodrussell

  Early this week my home server (a Linux machine) threw a kernel panic. Yesterday is happened a couple of times. Then all of a sudden, when I plugged a USB stick in to run a memory test, the monitor stopped coming on. Now whenever I turn it on, the system gets power...I heard the drives spin, I see the processor fan spin, and the hard drive light comes on...but nothing happens. I put a video card in the AGP slot, but still nothing. The light on the power button that usually comes on stopped coming on. I took the memory out to see if it would beep, but nothing beeped. It's like it's getting power, but it's not coming on. Does this sound like a motherboard problem to anyone else? I think it is, but a second opinion would be greatly appreciated. Thanks.

  Read the article

• to measure throughput of testing device connect to server via AP

  - by samantha

  Description of project- I have a test tool to which DUT connects. The test tool has an access point in it and once DUT get connected to it via mac address we check RSSI and some other features of WiFi of DUT. Now I am wondering is there is any way I can measure throughput of Device under test via mac address of DUT from server side. Test-tool has LINUX fedora 11 in it and major coding is done in c/C++ and json command. Previously, I have tried to install ftp server on test-tool and DUT can connect to it and we can measure the throughput or data transfer rate, but this is not feasible solution as it requires lot of intervention from DUT. What I am interested in is 1) To run some script on server side /test tool and it gives me throughput of bandwidth of connected device may be via mac address of DUT OR 2) Server script transfer some files/packets to DUT and we can measure the throughput. Coding is not a major challenge at this stage , I just need some tool which requires minimum intervention from DUT.

  Read the article

• TTL and traceroute showing different values for same domain

  - by Cray XT3

  y am i getting two different output for tracert and ping. Ping Result showing total hops of 20 and tracert showing 8. default ttl value on my linux machine 64,icmp echo reply ttl value 44. 64-44=20 but tracert is showing only 8 hops. What can be the reason? If tracert is implemented using ttl then why am i getting different values for same domain.no matter how many times i tried. Fo google and google services,ttl value and tracrt are same,but for other domains its different.

  Read the article

• My datacenter is unable to add PTR/rDNS record, then how can I prevent the mail outgoing from going to spam folder?

  - by gilzero

  I am having problem that mail sent out from my server all goes to recipient's spam folder. I am running Drupal sites on Linux server. CentOS w/ cPanel. Our users cannot receive email as the mail went to the spam folder. (such as registration email, contact form email) I was advised that I need to have PTR/rDNS record added for my host. I then contact my datacenter to add PTR/rDNS thing, unfortunately, the datacenter said they are unable to do it. So what can I do? Any other ways I can fix the problem? Thank you!

  Read the article

• Networking conflict - What is the most common default computer name?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "Dell(omitted)" logged on.) I've never been at a wifi spot that you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (I read via Google that Redhat linux default to "localhost" and Toshiba laptops default to "Toshiba.") Somebody probably keeps statistics. (I was referred here from serverfault.com) Thanks

  Read the article

• Suphp connection reset by peer in error logs

  - by trante

  In my Linux server's logs I have this record nearly every 5 minutes. I couldn't find the reason for two weeks and I would be very happy if you can recommend me a way to diagnose the problem. It is inside error_log file. I use php 5.3.8 and litespeed. 2012-09-03 16:01:28.399 [INFO] [95.7.223.91:63814-0#APVH_example.com] connection to [/tmp/lshttpd/ APVH_example.com_Suphp.sock. 781] on request #151, confirmed, 0, associated process: 845244, running: 0, error: Connection reset by peer!

  Read the article

• Why does a redirect from a local IP address assume localhost?

  - by Jeremy

  I am developing a web application on my desktop and it is running on port 80. I am able to access the application from my laptop connected to the LAN by entering my desktop's LAN IP address 192.168.1.8. Now, my application sends a redirect after login, but my laptop assumes the final address is localhost/login. If I manually type in the IP address and URI for any page, it shows that I am logged in, so it works as expected. So, why does the redirect assume localhost? Both of my machines are linux-based. The laptop being Chrome OS. I am running nginx which proxies non-static file requests to jetty on port 8080.

  Read the article

• Tool for purging unneeded backups

  - by Dana the Sane

  I'm in the common situation where the one of the linux servers I use for storing backups is filling up. I'm wondering what tools are available for doing this. Ideally, what I would like is something that keeps nightlies for the previous month, weeklies for the 2nd to 5th preceding months and retains monthlies (well, every 3rd week) for an indefinite period. Everything that falls outside of that would be deleted after the backups are run. I could write a script to do this, but I feel like there must be a standard tool for this task.

  Read the article

• Best filesystem for an external drive? ExFAT?

  - by GiH

  What is the best filesystem for use with multiple OS's? I saw this question but its old and doesn't take into account ExFAT. Here is what I know from my findings: NTFS - Can't write from Mac FAT32 - Doesn't support files larger than 4GB HFS - Only mac ExFAT - ??? I don't know much about this but it seems like it got rid of the 4GB limit of FAT32 and can be read on Windows, Mac, and Linux. Is ExFAT the best bet? I tried formatting the drive in ExFAT just now, but on Windows XP SP3 it was showing up as not formatted... It seems to me like FAT32 is still the best, but I wanted to see what other people had to say.

  Read the article

• Kernel appears to have no modules

  - by George Reith

  Useful info: OS: CentOS 5.8 final Kernel: 2.6.32-042stab056.8 My kernel came prebuilt with the server, I don't know anything about kernels and not a lot about linux however as far as I do know I should have some modules loaded by the kernel. I came across this problem because I am unable to run iscsi as it is expecting certain modules to be loaded. lsmod returns nothing. depmod -a returns: WARNING: Couldn't open directory /lib/modules/2.6.32-042stab056.8: No such file or directory FATAL: Could not open /lib/modules/2.6.32-042stab056.8/modules.dep.temp for writing: No such file or directory I have rebooted and nothing has changed. Does anyone know why this is happening?

  Read the article

• Virtual Hosting in RHEL5

  - by Kumar P

  We having RHEL5 linux server with few windows xp clients. We providing web development in php. Now my developers as for common local php server for keep their projects in same place. Currently proxy server and samba sharing are running in RHEL5 server. I installed httpd,php,MySQL in server. And i would like to configure virtual hosting too for LAN. What i want do for it ? In server we have 2 Ethernet ports, 1 for local connection and another one for Internet. Internet provided by ADSL provider. (192.168.0.0 series for ADSL modem connection and 10.1.1.0 for LAN connection. If i want to use virtual hosting , am i want to setup local DNS server ? My requirements are, setup php with mySQL server for Local clients with multiple hosting , without disturbing proxy and samba. Help me to solve it.

  Read the article

• How to delete folder of owner/group 99 99

  - by Aakash Chakravarthy

  I am using wordpress with wp-super-cache plugin. This plugin automatically created a cache folder in my site for storing the cached files. But unusually it created folder with owner/group 99 99. It was created automatically. Due to this, i am not able to delete that folder or change the CHMOD of that folder. This really a headache. I searched google, but none gave me a good answer. Please help me delete or change the CHMOD of that folder ? I am on Linux server.

  Read the article

• how to design network for connectivity between private and corporate LANs?

  - by maruti

  there is a bunch of servers connected to shared storage in a private LAN (10.x.x.x). this privateLAN is managed by a windows server (DHCP, DNS and directory services) these hosts need to be from outside of the datacenter Eg. Remote desktop. can the NIC2 on each of the hosts be connected to the other public LAN (compromising speed or security? what are improtant considerations: additional hardware? like switches? routing&DNS software? currently available hardware : Dell Powerconnect 6224 switch .... planning this for storage network. software: windows 2003 server for DHCP, DNS, A/D ? would it be more flexible to use Linux distributions like IPCOP, Untangle etc? all that I am looking for is good isolation between private and other networks, avoid DHCP, DNS, AD clashes.

  Read the article

• Do large folder sizes slow down IO performance?

  - by Aaron

  We have a Linux server process that writes a few thousand files to a directory, deletes the files, and then writes a few thousand more files to the same directory without deleting the directory. What I'm starting to see is that the process doing the writing is getting slower and slower. My question is this: The directory size of the folder has grown from 4096 to over 200000 as see by this output of ls -l. root@ad57rs0b# ls -l 15000PN5AIA3I6_B total 232 drwxr-xr-x 2 chef chef 233472 May 30 21:35 barcodes On ext3, can these large directory sizes slow down performance? Thanks. Aaron

  Read the article

• Wine not finding some files

  - by Levans

  I'm having strange issues with Wine : If I look a C:\windows\system32\drivers\ in wine explorer, the directory looks empty, while the directory ~/.wine/drive_c/windows/system32/drivers is not. Plus, having the H: drive mapped to my home directory, I can look at H:\.wine\drive_c\windows\system32\drivers and it is not empty, the files are here ! Thus it seems Wine has the rights to access these files. So why don't they appear on the C: drive ? Some of my programs need them. I'm using Gentoo Linux, and Wine is version 1.7.0 compiled with these useflags (from eix) : X alsa cups fontconfig gecko jpeg lcms ldap mono mp3 ncurses nls openal opengl perl png prelink run-exes ssl threads truetype udisks xcomposite xinerama xml -capi -custom-cflags -dos -gphoto2 -gsm -gstreamer -odbc -opencl -osmesa -oss -pulseaudio -samba -scanner -selinux -test -v4l ABI_MIPS="-n32 -n64 -o32" ABI_X86="32 64 -x32" ELIBC="glibc" EDIT: I just updated to wine 1.7.4 and nothing changed.

  Read the article

• /data/tmp on database server?

  - by Mellon

  I am on a Linux ubuntu machine with MySQL installed. My teacher gave out an assignment which mentioned "copy cars.dat to /data/tmp on the MySQL database server" without any explanations, I do not know what is the "/data/tmp on database server" means exactly? Basically after that I need to execute SQL statement like LOAD DATA INFILE '/data/tmp/cars.dat' INTO TABLE cars So, what does copy cars.dat to /data/tmp on the database server means as there is no /data/tmp directory even? Personally, I checked /etc/mysql/my.cnf file, inside which there are definitions of : ... basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp ... Does it mean to copy cars.dat to the tmpdir which is just /tmp under root directory??

  Read the article

• FBReader: How do I get it to display partial images?

  - by someguy

  I've been using FBReader so far for reading e-books, but my problem with it is how it handles images. Whenever there's an image, it isn't displayed until all of it can be displayed (i.e. it won't show if you haven't scrolled down far enough) and scrolling isn't smooth because the image is treated as one line. Is there a way to change this so that it displays the partially visible images? If there is not a way to change this, I am open to software suggestions to use as an alternative (I'm using Linux). I have already tried Calibre, but I find that it's too bloated. It takes ages to start up, and I don't want a directory for all my e-books...

  Read the article

• Why can't mplayer/libdvdcss/whatever play my DVDs?

  - by che

  To put it bluntly, mplayer is unable to correctly play video DVDs. It seems to correctly find the title and everything, but the picture is broken or not displayed at all, with messages like: a52: CRC check failed! a52: error at resampling [mpeg1video @ 0xa8d840]sequence header damaged [mpeg1video @ 0xa8d840]Missing picture start code Now, this all is on amd64 Gentoo Linux system. I believe the problem is not in mplayer itself, since the playback also breaks in VLC or when i copy the VOBs via vobcopy and try to play them afterwards. I use libdvdcss-1.2.10 and libdvdread-4.1.3_p1168 (current stable in Gentoo), and tried previous versions of both libs, but it didn't change a thing. The DVDs I have tried play fine in regular DVD player or on a Windows laptop. I remember the playback used to work about a year ago and I don't know what to try next. Any hints would be welcome.

  Read the article

• ARP replies contain wrong MAC address

  - by Jayen

  I've got a robot running linux with wired and wireless adapters. When I boot up, it connects to the wireless fine. When I assign an IP to the wired (either statically or with DHCP), it looks like it works. As in, ifconfig shows a proper IP and route shows proper routes. However, when I do an ARP request of the wired IP, the ARP reply contains the wireless MAC. ??? There's no bridge running on the robot, so why don't I get the wired MAC??? When the wire is disconnected, the wired IP replies to ping... Why is the robot replying over the wireless interface to IP requests on the wired???

  Read the article

• Can KVM roll back changes to Virtual Disks automatically?

  - by Cygon

  I'm currently using VirtualBox on my Linux server to run a small Windows guest OS. I've configured its main virtual hard drive as what VBox calls "Immutable" - meaning that any changes to it are written into a differencing image that is discarded when the system reboots. Can KVM do something similar? I've read about snapshots via "savevm", "loadvm" but I believe that's saved states, not differencing images. What I ultimately want is a VM with two drives: one reverts on each reboot, one keeps its changes. Ideally, the unchangeable drive image should be stored with only read access granted to the user running KVM.

  Read the article

• How do I associate server traffic to a domain hosted on that server?

  - by morley

  I have three or four Linux servers, each of which hosts anywhere from 5 to 50 domains. Each domain has its own folder: /www/projectname/web/ Logs go in: /www/projectname/log However, if there's a traffic spike (or, as I see it on my end, a memory usage spike), I'm not sure how to figure out which domain is responsible for the traffic without running tail -f on each of the projects and making an educated guess based on how fast things scroll. There's got to be a better way! There probably is, but I haven't seen it. And the last time I checked, bandwidth monitors only report system-wide load. So if anyone knows how to do this the right way, please let me know. Thanks!

  Read the article

• Giving a permission to write and read from /var/www

  - by mako

  I need that directory, as I want to put my sites there, so that apache can run them.. It is my virtual directory path.. and I am new to linux.. I just want to read and write from that directory.. How do I enable creating/saving/reading files/folders from that directory? What command do I give? I tried a few, but I think I need to be a super user to make the folder writtable readable. Note that I dont care about security.

  Read the article

• Creating a file server - How can I use a large VHD file in Hyper-V? (700GB)

  - by barfoon

  Hey everyone, After a few discussions (here, here, and here), I am still unable to create a simple VM that will be used as a fileserver hosted on my Hyper-V box. I have created a fixed 700GB SCSI drive (.vhd file), as I have learned an IDE drive of this size is not possible. Not to sound too cynical, but its blown me away at how much trouble its been to create a large amount of space and start using it. What is the best way to create a fileserver with a drive of this size hosted on Hyper-V Server 2008, and how can I get it going??? Inclusion of OS, driver, integration tools etc, anything you feel is required would be greatly appreciated. Extra information I am using the stand-alone version of Hyper-V server, and not Windows Server 2008. I have tried loading the Linux Integration Tools (linked in the comments of the last link above) onto a SUSE 11 VM and the installation fails, the machine cannot see the vhd at all. Thanks very much,

  Read the article

• Finding proof of server being compromised by Black Hole Toolkit exploit

  - by cosmicsafari

  I recently took over maintenance of a company server. (Just Host, C Panel, Linux server), theres a tonne of websites on it which i know nothing about. It had came to my attention that a client had attempted to access one of the websites hosted on this server and was met with a warning from windows defender. It had blocked access because it said the website had been compromised by the Black Hole Toolkit or something to that effect. Anyway I went in and updated various plugins and deleted some old suspect websites. I have since ran the website in question through a few online malware scanners and its comes up clean everytime. However im not convinced. Do any of you guys know extensive ways i can check that the server isn't still compromised. I have no way to install any malware scanners or anti virus programs on the server as it is horribly locked down by Just Host.

  Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >