development trunk - Page 409

Light shaped like a line

- by Michael

I am trying to figure out how line-shaped lights fit into the standard point light/spotlight/directional light scheme. The way I see it, there are two options: Seed the line with regular point lights and just deal with the artifacts. Easy, but seems wasteful. Make the line some kind of emissive material and apply a bloom effect. Sounds like it could work, but I can't test it in my engine yet. Is there a standard way to do this? Or for non-point lights in general?

Read the article

Lighting-Reflectance Models & Licensing Issues

- by codey

Generally, or specifically, is there any licensing issue with using any of the well known lighting/reflectance models (i.e. the BRDFs or other distribution or approximation functions): Phong, Blinn–Phong, Cook–Torrance, Blinn-Torrance-Sparrow, Lambert, Minnaert, Oren–Nayar, Ward, Strauss, Ashikhmin-Shirley and common modifications where applicable, such as: Beckmann distribution, Blinn distribution, Schlick's approximation, etc. in your shader code utilised in a commercial product? Or is it a non-issue?

Read the article

How to do geometric projection shadows?

- by John Murdoch

I have decided that since my game world is mostly flat I don't need better shadows than geometric projections - at least for now. The only problem is I don't even know how to do those properly - that is to produce a 4x4 matrix which would render shadows for my objects (that is, I guess, project them on a horizontal XZ plane). I would like a light source at infinity (e.g., the sun at some point in the sky) and thus parallel projection. My current code does something that looks almost right for small flying objects, but actually is a very rude approximation, as it doesn't project the objects onto the ground, but simply moves them there (I think). Also it always wrongly assumes the sun is always on the zenith (projecting straight down). Gdx.gl20.glEnable(GL10.GL_BLEND); Gdx.gl20.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); //shells shellTexture.bind(); shader.begin(); for (ShellState state : shellStates.values()) { transform.set(camera.combined); transform.mul(state.transform); shader.setUniformMatrix("u_worldView", transform); shader.setUniformi("u_texture", 0); shellMesh.render(shader, GL10.GL_TRIANGLES); } shader.end(); // shadows shader.begin(); for (ShellState state : shellStates.values()) { transform.set(camera.combined); m4.set(state.transform); state.transform.getTranslation(v3); m4.translate(0, -v3.y + 0.5f, 0); // TODO HACK: + 0.5f is a hack to ensure the shadow appears above the ground; this is overall a hack as we are just moving the shell to the surface instead of projecting it on the surface! transform.mul(m4); shader.setUniformMatrix("u_worldView", transform); shader.setUniformi("u_texture", 0); // TODO: make shadow black somehow shellMesh.render(shader, GL10.GL_TRIANGLES); } shader.end(); Gdx.gl.glDisable(GL10.GL_BLEND); So my questions are: a) What is the proper way to produce a Matrix4 to pass to openGL which would render the shadows for my objects? b) I am supposed to use another fragment shader for the shadows which would paint them in semi-transparent grey, correct? c) The limitation of this simplistic approach is that whenever there is some object on the ground (it is not flat) the shadows will not be drawn, correct? d) Do I need to add something very small to the y (up) coordinate to avoid z-fighting with ground textures? Or is the fact they will be semi-transparent enough to resolve that problem?

Read the article

Maya .IFF plugins for Gimp

- by Kara Marfia

Maya's preferred format for saving off a UV Snapshot is its own .IFF format, so I was hoping to find a plugin allowing Gimp 2 (Windows) to read it. I've found plenty of plugins for different linux distros, but none are win-friendly (that I can discern - admittedly I'm no whiz with Gimp). Does anyone know of one? Alternately, .tiff seems to work just fine, so if there's no good reason to bother fiddling with IFFs, I'd appreciate the input there, too. (sorry if this isn't on-topic)

Read the article

SpriteFont Exception, no such character?

- by Michal Bozydar Pawlowski

I have such spriteFont: <?xml version="1.0" encoding="utf-8"?>  <XnaContent xmlns:Graphics="Microsoft.Xna.Framework.Content.Pipeline.Graphics"> <Asset Type="Graphics:FontDescription">  <FontName>Segoe UI</FontName>  <Size>20</Size>  <Spacing>0</Spacing>  <UseKerning>true</UseKerning>  <Style>Regular</Style>    <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>Ұ</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> It has the character regions (32-1200) And I get this exception: A first chance exception of type 'System.ArgumentException' occurred in Microsoft.Xna.Framework.Graphics.ni.dll The character '?' (0x0441) is not available in this SpriteFont. If applicable, adjust the font's start and end CharacterRegions to include this character. Parameter name: character Why? I'm drawing the string like this: spriteBatch.DrawString(font24, zasadyText, zasadyTextPos, kolorCzcionki1, -0.05f, Vector2.Zero, 1.0f, SpriteEffects.None, 0.5f) I even changed the spriteFont to cyrillic: <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>ſ</End> </CharacterRegion> <CharacterRegion> <Start>А</Start> <End>ї</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> and it still doesn't work. I got the (0x441 = char) exception -- EDIT -- Ok, I got the solution. It was a letter mistake in language. I had this: if (jezyk == "ru_RU") { font14 = Content.Load<SpriteFont>("ru_font14"); font24 = Content.Load<SpriteFont>("ru_font24"); font12 = Content.Load<SpriteFont>("ru_czcionkaFloty"); font10 = Content.Load<SpriteFont>("ru_font10"); font28 = Content.Load<SpriteFont>("ru_font28"); font20 = Content.Load<SpriteFont>("ru_font20"); } else { font14 = Content.Load<SpriteFont>("font14"); font24 = Content.Load<SpriteFont>("font24"); font12 = Content.Load<SpriteFont>("czcionkaFloty"); font10 = Content.Load<SpriteFont>("font10"); font28 = Content.Load<SpriteFont>("font28"); font20 = Content.Load<SpriteFont>("font20"); } and there should be not "ru_RU" but "ru-RU" I have no idea. I changed the spriteFont to cyrillic: <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>ſ</End> </CharacterRegion> <CharacterRegion> <Start>А</Start> <End>ї</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> and it still doesn't work. I got the (0x441 = char) exception

Read the article

Box2D physics editor for complex bodies

- by Paul Manta

Is there any editor out there that would allow me to define complex entities, with joins connecting their multiple bodies, instead of regular single body entities? For example, an editor that would allow me to 'define' a car as having a main body with two circles as wheels, connected through joints. Clarification: I realize I haven't been clear enough about what I need. I'd like to make my engine data-driven, so all entities (and therefore their Box2D bodies) should be defined externally, not in code. I'm looking for a program like Code 'N' Web's PhysicsEditor, except that one only handles single body entities, no joints or anything like that. Like PhysicsEditor, the program should be configurable so that I can save the data in whatever format I want to. Does anyone know of any such software?

Read the article

How to port animation from one skeleton to another?

- by shawn

While I need to do this in a Blender3D modeler script, the math should be similar for other modelers or realtime engines. Blender3D specific terminology: Armature = skeleton EditBone = rest pose bone (stores the rest pose matrix) PoseBone = can store a different pose (animation matrix) for each frame of your animation I need to share animations (Blender Actions) between Armatures which have EditBones with same names and which have the same positions, but can have different (rest pose) angles and scales. Plus the Armatures might have different bone hierarchy (bone parenting/ no bone parenting). Why I need this: I've made an importer/exporter for a 3d format for a game. The format doesn't store enough info to connect/parent the bones, which makes posing/animating character models in a 3d modeller nearly impossible (original model files for the 3d modeler don't exist, this is for modding). As there are only 2 character skeleton types in the game, I decided to optionally allow to generate the bone from a hardcoded data in the model importer and undo that in the exporter. This allows to easily pose the model for checking weights, easily create weights, makes it easier for Blender to generate automatic weights and of course makes animating possible. This worked perfectly: the importer optionally generated the Armature itself and the exporter removed those changes, so the exported model works with existing animations in the game. But now I'm writing an importer and exporter for the game's animation format and here come the problems of: Trying to make original animations work in Blender with my "custom" (modified) Armature Trying to make animations created by using the "custom" (modified) Armature work with the original models in the game (and Blender). Constraints or bone snapping inside Blender won't work as they don't care that the bones have different angles in the rest pose, they will still face the same direction. It seems I just need to get the "difference" between the EditBone matrices of all EditBones for the two Armatures somehow and apply that difference to PoseBone matrices of all PoseBones, for all frames of my animation. I need to know how to get that difference and how to apply it. BTW, PoseBone matrices are relative to rest pose, they are by default [1.000000, 0.000000, 0.000000, 0.000000](matrix [row 0]) [0.000000, 1.000000, 0.000000, 0.000000](matrix [row 1]) [0.000000, 0.000000, 1.000000, 0.000000](matrix [row 2]) [0.000000, 0.000000, 0.000000, 1.000000](matrix [row 3]) So the question is: How to get the difference between two bone (EditBone) matrices to apply that difference to the animation matrices (PoseBone matrices)? Please be easy on the matrix math.

Read the article

3D Studio Max biped restrictions?

- by meds

I have a stock biped character in 3D studio max which has a jump animation. The problem I have with the jump animation is that there is actual y offset happening inside it which makes it awkward to play while the character is jumping since it's not only jumping in the game world but the jump animation is adding its own height offset. I'm tryuing to remove the jump animations height offset, so far I've found the root node and deleted all its key frames which has helped a bit. The problem I'm having now is that the character still has some height offset and if I try to lower it it has a fake 'ground' that isn't at 0 and the limbs sort of bend on the imaginary floor, si there a way to remove this restriction just for the jump animation? Here's what I mean: http://i.imgur.com/qoWIR.png Any idea for a fix? I'm using Unity 3D if that opens any other possibilities...

Read the article

Deferred rendering with both Clockwise and CounterClockwise culling

- by user1423893

I have a deferred rendering system that works well with objects that appear solid and drawn using CounterClockwise culling. I have a problem with Clockwise culled objects that are supposed to represent hollow that display their inside faces only. The image below shows a CounterClockwise culled object (left) Clockwise culled object (right). The Clockwise culled object faces display what would be displayed on the CounterClockwise face. How can I get the lighting to light the inner faces for Clockwise culled objects and continue lighting the outer CounterClockwise faces as normal? My lighting method is below private void DeferredLighting(GameTime gameTime) { // Set the render target for the lights game.GraphicsDevice.SetRenderTarget(lightMap); // Clear the render target to (0, 0, 0, 0) game.GraphicsDevice.Clear(Color.Transparent); // Set the render states game.GraphicsDevice.BlendState = BlendState.Additive; game.GraphicsDevice.DepthStencilState = DepthStencilState.None; game.GraphicsDevice.RasterizerState = RasterizerState.CullCounterClockwise; // Set sampler state to Point as the Surface type requires it in XNA 4.0 game.GraphicsDevice.SamplerStates[0] = SamplerState.PointClamp; // Set the camera properties for all lights BaseLight.SetCameraProperties(game.ActiveCamera); // Draw the lights int numLights = lights.Count; for (int i = 0; i < numLights; ++i) { if (lights[i].Diffuse.W > 0f) { lights[i].Render(gameTime, ref normalMap, ref depthMap, ref sgrMap); } } // Resolve the render target game.GraphicsDevice.SetRenderTarget(null); } I have tried adjusting the render states but no combination works for both objects.

Read the article

Updating scene graph in multithreaded game

- by user782220

In a game with a render thread and a game logic thread the game logic thread needs to update the scene graph used by the render thread. I've read about ideas such as a queue of updates. Can someone describe to a newbie at scene graphs what kind of interface the scene graph exports. Presumably it would be rather complicated. So then how does a queue of updates get implemented in C++ in a way that can handle the complexity of the interface of the scene graph while also being type safe and efficient. Again I'm a newbie at scene graphs and C++.

Read the article

Loading files during run time

- by NDraskovic

I made a content pipeline extension (using this tutorial) in XNA 4.0 game. I altered some aspects, so it serves my need better, but the basic idea still applies. Now I want to go a step further and enable my game to be changed during run time. The file I am loading trough my content pipeline extension is very simple, it only contains decimal numbers, so I want to enable the user to change that file at will and reload it while the game is running (without recompiling as I had to do so far). This file is a very simplified version of level editor, meaning that it contains rows like: 1 1,5 1,78 -3,6 Here, the first number determines the object that will be drawn to the scene, and the other 3 numbers are coordinates where that object will be placed. So, how can I change the file that contains these numbers so that the game loads it and redraws the scene accordingly? Thanks

Read the article

Light following me around the room. Something is wrong with my shader!

- by Robinson

I'm trying to do a spot (Blinn) light, with falloff and attenuation. It seems to be working OK except I have a bit of a space problem. That is, whenever I move the camera the light moves to maintain the same relative position, rather than changing with the camera. This results in the light moving around, i.e. not always falling on the same surfaces. It's as if there's a flashlight attached to the camera. I'm transforming the lights beforehand into view space, so Light_Position and Light_Direction are already in eye space (I hope!). I made a little movie of what it looks like here: My camera rotating around a point inside a box. The light is fixed in the centre up and its "look at" point in a fixed position in front of it. As you can see, as the camera rotates around the origin (always looking at the centre), so don't think the box is rotating (!). The lighting follows it around. To start, some code. This is how I'm transforming the light into view space (it gets passed into the shader already in view space): // Compute eye-space light position. Math::Vector3d eyeSpacePosition = MyCamera->ViewMatrix() * MyLightPosition; MyShaderVariables->Set(MyLightPositionIndex, eyeSpacePosition); // Compute eye-space light direction vector. Math::Vector3d eyeSpaceDirection = Math::Unit(MyLightLookAt - MyLightPosition); MyCamera->ViewMatrixInverseTranspose().TransformNormal(eyeSpaceDirection); MyShaderVariables->Set(MyLightDirectionIndex, eyeSpaceDirection); Can anyone give me a clue as to what I'm doing wrong here? I think the light should remain looking at a fixed point on the box, regardless of the camera orientation. Here are the vertex and pixel shaders: /////////////////////////////////////////////////// // Vertex Shader /////////////////////////////////////////////////// #version 420 /////////////////////////////////////////////////// // Uniform Buffer Structures /////////////////////////////////////////////////// // Camera. layout (std140) uniform Camera { mat4 Camera_View; mat4 Camera_ViewInverseTranspose; mat4 Camera_Projection; }; // Matrices per model. layout (std140) uniform Model { mat4 Model_World; mat4 Model_WorldView; mat4 Model_WorldViewInverseTranspose; mat4 Model_WorldViewProjection; }; // Spotlight. layout (std140) uniform OmniLight { float Light_Intensity; vec3 Light_Position; vec3 Light_Direction; vec4 Light_Ambient_Colour; vec4 Light_Diffuse_Colour; vec4 Light_Specular_Colour; float Light_Attenuation_Min; float Light_Attenuation_Max; float Light_Cone_Min; float Light_Cone_Max; }; /////////////////////////////////////////////////// // Streams (per vertex) /////////////////////////////////////////////////// layout(location = 0) in vec3 attrib_Position; layout(location = 1) in vec3 attrib_Normal; layout(location = 2) in vec3 attrib_Tangent; layout(location = 3) in vec3 attrib_BiNormal; layout(location = 4) in vec2 attrib_Texture; /////////////////////////////////////////////////// // Output streams (per vertex) /////////////////////////////////////////////////// out vec3 attrib_Fragment_Normal; out vec4 attrib_Fragment_Position; out vec2 attrib_Fragment_Texture; out vec3 attrib_Fragment_Light; out vec3 attrib_Fragment_Eye; /////////////////////////////////////////////////// // Main /////////////////////////////////////////////////// void main() { // Transform normal into eye space attrib_Fragment_Normal = (Model_WorldViewInverseTranspose * vec4(attrib_Normal, 0.0)).xyz; // Transform vertex into eye space (world * view * vertex = eye) vec4 position = Model_WorldView * vec4(attrib_Position, 1.0); // Compute vector from eye space vertex to light (light is in eye space already) attrib_Fragment_Light = Light_Position - position.xyz; // Compute vector from the vertex to the eye (which is now at the origin). attrib_Fragment_Eye = -position.xyz; // Output texture coord. attrib_Fragment_Texture = attrib_Texture; // Compute vertex position by applying camera projection. gl_Position = Camera_Projection * position; } and the pixel shader: /////////////////////////////////////////////////// // Pixel Shader /////////////////////////////////////////////////// #version 420 /////////////////////////////////////////////////// // Samplers /////////////////////////////////////////////////// uniform sampler2D Map_Diffuse; /////////////////////////////////////////////////// // Global Uniforms /////////////////////////////////////////////////// // Material. layout (std140) uniform Material { vec4 Material_Ambient_Colour; vec4 Material_Diffuse_Colour; vec4 Material_Specular_Colour; vec4 Material_Emissive_Colour; float Material_Shininess; float Material_Strength; }; // Spotlight. layout (std140) uniform OmniLight { float Light_Intensity; vec3 Light_Position; vec3 Light_Direction; vec4 Light_Ambient_Colour; vec4 Light_Diffuse_Colour; vec4 Light_Specular_Colour; float Light_Attenuation_Min; float Light_Attenuation_Max; float Light_Cone_Min; float Light_Cone_Max; }; /////////////////////////////////////////////////// // Input streams (per vertex) /////////////////////////////////////////////////// in vec3 attrib_Fragment_Normal; in vec3 attrib_Fragment_Position; in vec2 attrib_Fragment_Texture; in vec3 attrib_Fragment_Light; in vec3 attrib_Fragment_Eye; /////////////////////////////////////////////////// // Result /////////////////////////////////////////////////// out vec4 Out_Colour; /////////////////////////////////////////////////// // Main /////////////////////////////////////////////////// void main(void) { // Compute N dot L. vec3 N = normalize(attrib_Fragment_Normal); vec3 L = normalize(attrib_Fragment_Light); vec3 E = normalize(attrib_Fragment_Eye); vec3 H = normalize(L + E); float NdotL = clamp(dot(L,N), 0.0, 1.0); float NdotH = clamp(dot(N,H), 0.0, 1.0); // Compute ambient term. vec4 ambient = Material_Ambient_Colour * Light_Ambient_Colour; // Diffuse. vec4 diffuse = texture2D(Map_Diffuse, attrib_Fragment_Texture) * Light_Diffuse_Colour * Material_Diffuse_Colour * NdotL; // Specular. float specularIntensity = pow(NdotH, Material_Shininess) * Material_Strength; vec4 specular = Light_Specular_Colour * Material_Specular_Colour * specularIntensity; // Light attenuation (so we don't have to use 1 - x, we step between Max and Min). float d = length(-attrib_Fragment_Light); float attenuation = smoothstep(Light_Attenuation_Max, Light_Attenuation_Min, d); // Adjust attenuation based on light cone. float LdotS = dot(-L, Light_Direction), CosI = Light_Cone_Min - Light_Cone_Max; attenuation *= clamp((LdotS - Light_Cone_Max) / CosI, 0.0, 1.0); // Final colour. Out_Colour = (ambient + diffuse + specular) * Light_Intensity * attenuation; }

Read the article

Component-wise GLSL vector branching

- by Gustavo Maciel

I'm aware that it usually is a BAD idea to operate separately on GLSL vec's components separately. For example: //use instrinsic functions, they do the calculation on 4 components at a time. float dot = v1.x*v2.x + v1.y * v2.y + v1.z * v2.z; //NEVER float dot = dot(v1, v2); //YES //Multiply one by one is not good too, since the ALU can do the 4 components at a time too. vec3 mul = vec3(v1.x * v2.x, v1.y * v2.y, v1.z * v2.z); //NEVER vec3 mul = v1 * v2; I've been struggling thinking, are there equivalent operations for branching? For example: vec4 Overlay(vec4 v1, vec4 v2, vec4 opacity) { bvec4 less = lessThan(v1, vec4(0.5)); vec4 blend; for(int i = 0; i < 4; ++i) { if(less[i]) blend[i] = 2.0 * v1[i]*v2[i]; else blend[i] = 1.0 - 2.0 * (1.0 - v1[i])*(1.0 - v2[i]); } return v1 + (blend-v1)*opacity; } This is a Overlay operator that works component wise. I'm not sure if this is the best way to do it, since I'm afraid these for and if can be a bottleneck later. Tl;dr, Can I branch component wise? If yes, how can I optimize that Overlay function with it?

Read the article

Exporting XNA class library as a DLL file

- by Will Bagley

I have downloaded an open source project that I intend to use with my current game. The download came with all the class files from the original project as well as a pre-compiled DLL file representing the project. I was able to easily link this DLL with my current project and get it working just fine, no problems there. The problem I now have is that I want to make a couple of changes to the original libraries (extend its functionality a bit to better suit my needs) and re-export the class library as a DLL again, but I have no clue how to do this. Is there some simple way in VS where I can just take the class library and export/compile it as a DLL file again or is there more to it than that? This seems like something that should be pretty simple but my efforts to find an answer have so far come up with nothing. Thanks in advance.

Read the article

Calculating collision force with AfterCollision/NormalImpulse is unreliable when IgnoreCCD = false?

- by Michael

I'm using Farseer Physics Engine 3.3.1 in a very simple XNA 4 test game. (Note: I'm also tagging this Box2D, because Farseer is a direct port of Box2D and I will happily accept Box2D answers that solve this problem.) In this game, I'm creating two bodies. The first body is created using BodyFactory.CreateCircle and BodyType.Dynamic. This body can be moved around using the keyboard (which sets Body.LinearVelocity). The second body is created using BodyFactory.CreateRectangle and BodyType.Static. This body is static and never moves. Then I'm using this code to calculate the force of collision when the two bodies collide: staticBody.FixtureList[0].AfterCollision += new AfterCollisionEventHandler(AfterCollision); protected void AfterCollision(Fixture fixtureA, Fixture fixtureB, Contact contact) { float maxImpulse = 0f; for (int i = 0; i < contact.Manifold.PointCount; i++) maxImpulse = Math.Max(maxImpulse, contact.Manifold.Points[i].NormalImpulse); // maxImpulse should contain the force of the collision } This code works great if both of these bodies are set to IgnoreCCD=true. I can calculate the force of collision between them 100% reliably. Perfect. But here's the problem: If I set the bodies to IgnoreCCD=false, that code becomes wildly unpredictable. AfterCollision is called reliably, but for some reason the NormalImpulse is 0 about 75% of the time, so only about one in four collisions is registered. Worse still, the NormalImpulse seems to be zero for completely random reasons. The dynamic body can collide with the static body 10 times in a row in virtually exactly the same way, and only 2 or 3 of the hits will register with a NormalImpulse greater than zero. Setting IgnoreCCD=true on both bodies instantly solves the problem, but then I lose continuous physics detection. Why is this happening and how can I fix it? Here's a link to a simple XNA 4 solution that demonstrates this problem in action: http://www.mediafire.com/?a1w242q9sna54j4

Read the article

Anisotropic and trilinear filtering?

- by fedab

I'm confused about the usage of trilinear filtering and anisotropic filtering in SharpDX. As far as i understood, trilinear filtering does linear filtering to the textures and in a case of LOD-change it also interpolates between the too LODs to smooth the transition. Anisotropic filtering make the texture bigger. Now it is possible to use trilinear filtering to do the same thing, due to anisotropic filtering with bigger textures. This causes a lesser blurred image, when you use anisotropy, because the interpolation is better. Now, it should be possible to use trilinear filtering and anisotropic filtering at the same time. But in the SamplerState i can only choose Filter.Anisotropy or Filter.MinMagMipLinear (should be trilinear, right?). You can see all possible filters here: D3D11 Filter Enumeration. So my question: Can you use both techniques together, if yes, how can i archieve that in SharpDX with SamplerState?

Read the article

how to move the camera behind a model with the same angle? in XNA

- by Mehdi Bugnard

I meet are having difficulty in moving my camera behind an object in a 3D world. I would create two view mode. 1: for fps (first person). 2nd: external view behind the character (second person). I searched the net some example but it does not work in my project. Here is my code used to change view if F2 is pressed //Camera double X1 = this.camera.PositionX; double X2 = this.player.Position.X; double Z1 = this.camera.PositionZ; double Z2 = this.player.Position.Z; //Verify that the user must not let the press F2 if (!this.camera.IsF2TurnedInBoucle) { // If the view mode is the second person if (this.camera.ViewCamera_type == CameraSimples.ChangeView.SecondPerson) { this.camera.ViewCamera_type = CameraSimples.ChangeView.firstPerson; //Calcul position - ?? Here my problem double direction = Math.Atan2(X2 - X1, Z2 - Z1) * 180.0 / 3.14159265; //Calcul angle - ?? Here my problem this.camera.position = .. this.camera.rotation = .. this.camera.MouseRadian_LeftrightRot = (float)direction; } //IF mode view is first person else { //....

Read the article

How or why would this mechanic (not) work to bring game balance to a singleplayer RPG? [closed]

- by 0xFFF1

Mechanic details The player, the monsters, and the merchants act as three separate parties. The player needs to beat up monsters for exp points and resources to sell and to buy potions from merchants to continue to fight. The monsters need healing and reviving to survive (also bought from merchants) and the merchants need potion ingredients from the player and the monsters to make potions to sell. These potions are only able to be processed in such bulk by merchants thus their potions would be cheaper than making them yourself. Only the monsters can farm ingredients in bulk. Only the player is or has to be overly aggressive (in bulk). Monsters can farm and produce "Level up candies" that do the work of exp. they are eaten right away after they are made and are never stockpiled or held for fear of the player and merchants who want to sell to the player. The monsters will defend themselves. Reviving is very expensive. The merchants can be found either with a concerned expression or a grinning expression based on how much profit they are making compared to their morale standing. The economies of each monster town and merchant city are distinct but interconnected. Magic Swords are worth a lot. So what I need to know is what concerns would there be to design a game around this mechanic and/or design this mechanic around a developing game. which would fare better? Is game balance an issue here? (how strong the monsters get or how quickly they die off based on the player's input into the system), Or is game balance solely in the hands of the player? (he decides if he overkills monsters or get underleveled.) What do I need to think about to make sure it isn't too easy or too hard to swing the amount/strength of monsters compared to the player and the amount of profit the merchants get vs the player. Would indicating how out of whack things are getting in game help with this?

Read the article

Modern Shader Book?

- by Michael Stum

I'm interested in learning about Shaders: What are they, when/for what would I use them, and how to use them. (Specifically I'm interested in Water and Bloom effects, but I know close to 0 about Shaders, so I need a general introduction). I saw a lot of books that are a couple of years old, so I don't know if they still apply. I'm targeting XNA 4.0 at the moment (which I believe means HLSL Shaders for Shader Model 4.0), but anything that generally targets DirectX 11 and OpenGL 4 is helpful I guess.

Read the article

what making a good soundtrack for social game

- by Maged

there are many successful social games in Facebook and other social sites like brain buddies, who has the biggest brain and word challenge.both of them have a great soundtrack while playing and in the beginning of the game . my question is how to find a good soundtrack or what's i should look for to find a good soundtrack like this that's help to attract the user specially for games that need concentration ?

Read the article

Friction not working for Vehicle in BulletPhysics

- by Manmohan Bishnoi

I am creating a vehicle using bullet-physics engine (v 2.82). I created a ground ( btBoxShape ), a box and a vehicle (following the demo). But friction between ground and vehicle wheels seems not working. As soon as the vehicle is placed in 3d world, it starts moving forward. START : Steering works for the vehicle, but engineForce and brakingForce does not work (i.e. I cannot speed-up or stop the vehicle) : I create physics world like this : void initPhysics() { broadphase = new btDbvtBroadphase(); collisionConfiguration = new btDefaultCollisionConfiguration(); dispatcher = new btCollisionDispatcher(collisionConfiguration); solver = new btSequentialImpulseConstraintSolver(); dynamicsWorld = new btDiscreteDynamicsWorld(dispatcher, broadphase, solver, collisionConfiguration); dynamicsWorld->setGravity(btVector3(0, -9.81, 0)); // Debug Drawer bulletDebugugger.setDebugMode(btIDebugDraw::DBG_DrawWireframe); dynamicsWorld->setDebugDrawer(&bulletDebugugger); //groundShape = new btStaticPlaneShape(btVector3(0, 1, 0), 1); groundShape = new btBoxShape(btVector3(50, 3, 50)); fallShape = new btBoxShape(btVector3(1, 1, 1)); // Orientation and Position of Ground groundMotionState = new btDefaultMotionState(btTransform(btQuaternion(0, 0, 0, 1), btVector3(0, -3, 0))); btRigidBody::btRigidBodyConstructionInfo groundRigidBodyCI(0, groundMotionState, groundShape, btVector3(0, 0, 0)); groundRigidBody = new btRigidBody(groundRigidBodyCI); dynamicsWorld->addRigidBody(groundRigidBody); /////////////////////////////////////////////////////////////////////// // Vehicle Setup /////////////////////////////////////////////////////////////////////// vehicleChassisShape = new btBoxShape(btVector3(1.f, 0.5f, 2.f)); vehicleBody = new btCompoundShape(); localTrans.setIdentity(); localTrans.setOrigin(btVector3(0, 1, 0)); vehicleBody->addChildShape(localTrans, vehicleChassisShape); localTrans.setOrigin(btVector3(3, 0.f, 0)); vehicleMotionState = new btDefaultMotionState(localTrans); //vehicleMotionState = new btDefaultMotionState(btTransform(btQuaternion(0, 0, 0, 1), btVector3(3, 0, 0))); btVector3 vehicleInertia(0, 0, 0); vehicleBody->calculateLocalInertia(vehicleMass, vehicleInertia); btRigidBody::btRigidBodyConstructionInfo vehicleRigidBodyCI(vehicleMass, vehicleMotionState, vehicleBody, vehicleInertia); vehicleRigidBody = new btRigidBody(vehicleRigidBodyCI); dynamicsWorld->addRigidBody(vehicleRigidBody); wheelShape = new btCylinderShapeX(btVector3(wheelWidth, wheelRadius, wheelRadius)); { vehicleRayCaster = new btDefaultVehicleRaycaster(dynamicsWorld); vehicle = new btRaycastVehicle(vehicleTuning, vehicleRigidBody, vehicleRayCaster); // never deactivate vehicle vehicleRigidBody->setActivationState(DISABLE_DEACTIVATION); dynamicsWorld->addVehicle(vehicle); float connectionHeight = 1.2f; bool isFrontWheel = true; vehicle->setCoordinateSystem(rightIndex, upIndex, forwardIndex); // 0, 1, 2 // add wheels // front left btVector3 connectionPointCS0(CUBE_HALF_EXTENT-(0.3*wheelWidth), connectionHeight, 2*CUBE_HALF_EXTENT-wheelRadius); vehicle->addWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, vehicleTuning, isFrontWheel); // front right connectionPointCS0 = btVector3(-CUBE_HALF_EXTENT+(0.3*wheelWidth), connectionHeight, 2*CUBE_HALF_EXTENT-wheelRadius); vehicle->addWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, vehicleTuning, isFrontWheel); isFrontWheel = false; // rear right connectionPointCS0 = btVector3(-CUBE_HALF_EXTENT+(0.3*wheelWidth), connectionHeight, -2*CUBE_HALF_EXTENT+wheelRadius); vehicle->addWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, vehicleTuning, isFrontWheel); // rear left connectionPointCS0 = btVector3(CUBE_HALF_EXTENT-(0.3*wheelWidth), connectionHeight, -2*CUBE_HALF_EXTENT+wheelRadius); vehicle->addWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, vehicleTuning, isFrontWheel); for (int i = 0; i < vehicle->getNumWheels(); i++) { btWheelInfo& wheel = vehicle->getWheelInfo(i); wheel.m_suspensionStiffness = suspensionStiffness; wheel.m_wheelsDampingRelaxation = suspensionDamping; wheel.m_wheelsDampingCompression = suspensionCompression; wheel.m_frictionSlip = wheelFriction; wheel.m_rollInfluence = rollInfluence; } } /////////////////////////////////////////////////////////////////////// // Orientation and Position of Falling body fallMotionState = new btDefaultMotionState(btTransform(btQuaternion(0, 0, 0, 1), btVector3(-1, 5, 0))); btScalar mass = 1; btVector3 fallInertia(0, 0, 0); fallShape->calculateLocalInertia(mass, fallInertia); btRigidBody::btRigidBodyConstructionInfo fallRigidBodyCI(mass, fallMotionState, fallShape, fallInertia); fallRigidBody = new btRigidBody(fallRigidBodyCI); dynamicsWorld->addRigidBody(fallRigidBody); } I step physics world like this : // does not work vehicle->applyEngineForce(maxEngineForce, WHEEL_REARLEFT); vehicle->applyEngineForce(maxEngineForce, WHEEL_REARRIGHT); // these also do not work vehicle->setBrake(gBreakingForce, WHEEL_REARLEFT); vehicle->setBrake(gBreakingForce, WHEEL_REARRIGHT); // this works vehicle->setSteeringValue(gVehicleSteering, WHEEL_FRONTLEFT); vehicle->setSteeringValue(gVehicleSteering, WHEEL_FRONTRIGHT); dynamicsWorld->stepSimulation(1 / 60.0f, 10); However If I apply brakingForce to all 4 wheels (i.e. including WHEEL_FRONTLEFT and WHEEL_FRONTRIGHT), then my vehicle stops, but keeps sliding/moving forward very very slowly. How do I fix this ?

Read the article

how to define a field of view for the entire map for shadow?

- by Mehdi Bugnard

I recently added "Shadow Mapping" in my XNA games to include shadows. I followed the nice and famous tutorial from "Riemers" : http://www.riemers.net/eng/Tutorials/XNA/Csharp/Series3/Shadow_map.php . This code work nice and I can see my source of light and shadow. But the problem is that my light source does not match the field of view that I created. I want the light covers the entire map of my game. I don't know why , but the light only affect 2-3 cubes of my map. ScreenShot: (the emission of light illuminates only 2-3 blocks and not the full map) Here is my code i create the fieldOfView for LightviewProjection Matrix: Vector3 lightDir = new Vector3(10, 52, 10); lightPos = new Vector3(10, 52, 10); Matrix lightsView = Matrix.CreateLookAt(lightPos, new Vector3(105, 50, 105), new Vector3(0, 1, 0)); Matrix lightsProjection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver2, 1f, 20f, 1000f); lightsViewProjectionMatrix = lightsView * lightsProjection; As you can see , my nearPlane and FarPlane are set to 20f and 100f . So i don't know why the light stop after 2 cubes. it's should be bigger Here is set the value to my custom effect HLSL in the shader file /* SHADOW VALUE */ effectWorld.Parameters["LightDirection"].SetValue(lightDir); effectWorld.Parameters["xLightsWorldViewProjection"].SetValue(Matrix.Identity * .lightsViewProjectionMatrix); effectWorld.Parameters["xWorldViewProjection"].SetValue(Matrix.Identity * arcadia.camera.View * arcadia.camera.Projection); effectWorld.Parameters["xLightPower"].SetValue(1f); effectWorld.Parameters["xAmbient"].SetValue(0.3f); Here is my custom HLSL shader effect file "*.fx" // This sample uses a simple Lambert lighting model. float3 LightDirection = normalize(float3(-1, -1, -1)); float3 DiffuseLight = 1.25; float3 AmbientLight = 0.25; uniform const float3 DiffuseColor = 1; uniform const float Alpha = 1; uniform const float3 EmissiveColor = 0; uniform const float3 SpecularColor = 1; uniform const float SpecularPower = 16; uniform const float3 EyePosition; // FOG attribut uniform const float FogEnabled ; uniform const float FogStart ; uniform const float FogEnd ; uniform const float3 FogColor ; float3 cameraPos : CAMERAPOS; texture Texture; sampler Sampler = sampler_state { Texture = (Texture); magfilter = LINEAR; minfilter = LINEAR; mipfilter = LINEAR; AddressU = mirror; AddressV = mirror; }; texture xShadowMap; sampler ShadowMapSampler = sampler_state { Texture = <xShadowMap>; magfilter = LINEAR; minfilter = LINEAR; mipfilter = LINEAR; AddressU = clamp; AddressV = clamp; }; /* *************** */ /* SHADOW MAP CODE */ /* *************** */ struct SMapVertexToPixel { float4 Position : POSITION; float4 Position2D : TEXCOORD0; }; struct SMapPixelToFrame { float4 Color : COLOR0; }; struct SSceneVertexToPixel { float4 Position : POSITION; float4 Pos2DAsSeenByLight : TEXCOORD0; float2 TexCoords : TEXCOORD1; float3 Normal : TEXCOORD2; float4 Position3D : TEXCOORD3; }; struct SScenePixelToFrame { float4 Color : COLOR0; }; float DotProduct(float3 lightPos, float3 pos3D, float3 normal) { float3 lightDir = normalize(pos3D - lightPos); return dot(-lightDir, normal); } SSceneVertexToPixel ShadowedSceneVertexShader(float4 inPos : POSITION, float2 inTexCoords : TEXCOORD0, float3 inNormal : NORMAL) { SSceneVertexToPixel Output = (SSceneVertexToPixel)0; Output.Position = mul(inPos, xWorldViewProjection); Output.Pos2DAsSeenByLight = mul(inPos, xLightsWorldViewProjection); Output.Normal = normalize(mul(inNormal, (float3x3)World)); Output.Position3D = mul(inPos, World); Output.TexCoords = inTexCoords; return Output; } SScenePixelToFrame ShadowedScenePixelShader(SSceneVertexToPixel PSIn) { SScenePixelToFrame Output = (SScenePixelToFrame)0; float2 ProjectedTexCoords; ProjectedTexCoords[0] = PSIn.Pos2DAsSeenByLight.x / PSIn.Pos2DAsSeenByLight.w / 2.0f + 0.5f; ProjectedTexCoords[1] = -PSIn.Pos2DAsSeenByLight.y / PSIn.Pos2DAsSeenByLight.w / 2.0f + 0.5f; float diffuseLightingFactor = 0; if ((saturate(ProjectedTexCoords).x == ProjectedTexCoords.x) && (saturate(ProjectedTexCoords).y == ProjectedTexCoords.y)) { float depthStoredInShadowMap = tex2D(ShadowMapSampler, ProjectedTexCoords).r; float realDistance = PSIn.Pos2DAsSeenByLight.z / PSIn.Pos2DAsSeenByLight.w; if ((realDistance - 1.0f / 100.0f) <= depthStoredInShadowMap) { diffuseLightingFactor = DotProduct(xLightPos, PSIn.Position3D, PSIn.Normal); diffuseLightingFactor = saturate(diffuseLightingFactor); diffuseLightingFactor *= xLightPower; } } float4 baseColor = tex2D(Sampler, PSIn.TexCoords); Output.Color = baseColor*(diffuseLightingFactor + xAmbient); return Output; } SMapVertexToPixel ShadowMapVertexShader(float4 inPos : POSITION) { SMapVertexToPixel Output = (SMapVertexToPixel)0; Output.Position = mul(inPos, xLightsWorldViewProjection); Output.Position2D = Output.Position; return Output; } SMapPixelToFrame ShadowMapPixelShader(SMapVertexToPixel PSIn) { SMapPixelToFrame Output = (SMapPixelToFrame)0; Output.Color = PSIn.Position2D.z / PSIn.Position2D.w; return Output; } /* ******************* */ /* END SHADOW MAP CODE */ /* ******************* */ / For rendering without instancing. technique ShadowMap { pass Pass0 { VertexShader = compile vs_2_0 ShadowMapVertexShader(); PixelShader = compile ps_2_0 ShadowMapPixelShader(); } } technique ShadowedScene { /* pass Pass0 { VertexShader = compile vs_2_0 VSBasicTx(); PixelShader = compile ps_2_0 PSBasicTx(); } */ pass Pass1 { VertexShader = compile vs_2_0 ShadowedSceneVertexShader(); PixelShader = compile ps_2_0 ShadowedScenePixelShader(); } } technique SimpleFog { pass Pass0 { VertexShader = compile vs_2_0 VSBasicTx(); PixelShader = compile ps_2_0 PSBasicTx(); } } I edited my fx file , for show you only information and functions about the shadow ;-)

Read the article

Setting Anchor Point

- by Siddharth

I want to set anchor point for the sprite like cocos2d has done for their implementation. I do not found any thing like that in andengine so please provide guidance on that. I want to move the sprite on touch so I use following code but that does not work for me. super.setPosition(pX - this.getWidthScaled() / 2, pY - this.getHeightScaled() / 2); Because I touch on the corner of the image but automatically it comes at center of the image because of above code. I want to remain the touch at desire position and drag it. For me the anchor point became useful. But I don't found anything in andengine.

Read the article

If I use my own normal values, should I turn off winding order culling?

- by Phil

I've discovered that I managed to program a series of boxes with indexed vertices in such a way that every other triangle (Half of each face) has a backwards winding order. As a result, XNA is culling half of them. However, my Vertex objects contain normal data that I have explicitly set, and I am going to implement my own backface culling shortly to reduce the size of the VertexBuffer. Should I turn off winding order culling and manage it myself, or should I make sure the winding order is consistent and let XNA handle it?

Read the article

Time calculation between openGL update calls.

- by Vijayendra

In XNA, the system calls update and draw function with the time information. This contains information such as how much time has passed since last update was called. This makes easy to integrate time and do animation calculation accordingly. But I dont see any such mechanism in openGL. I see openGL requires programmers to have their own implementation which could be buggy or inefficient. Is there any standard (and efficient) code that demonstrate this practice in openGL?

Search Results

Search found 26043 results on 1042 pages for 'development trunk'.

Page 409/1042 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416 | Next Page >

- by Michael

- by codey

- by John Murdoch

- by Kara Marfia

- by Michal Bozydar Pawlowski

- by Paul Manta

- by shawn

- by meds

- by user1423893

- by user782220

- by NDraskovic

- by Robinson

- by Gustavo Maciel

- by Will Bagley

- by Michael

- by fedab

- by Mehdi Bugnard

- by 0xFFF1

- by Michael Stum

- by Maged

- by Manmohan Bishnoi

- by Mehdi Bugnard

- by Siddharth

- by Phil

- by Vijayendra

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416 | Next Page >