Search Results

Search found 1900 results on 76 pages for 'xserve raid'.

Page 58/76 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Load Average runaway

  - by mewrei

  Is there any way to chase down lockups and runaway load averages? Every so often (pretty randomly) I'll get my load average spike up over 5 usually to around 10-15 and sometimes as high as 75 (dual core machine), and cause my system to lock for an indeterminate amount of time. The only thing I can possibly chase it to is using nVidia fakeraid (RAID-1) with JFS on top of that for my /home partition. Also I noticed that when my load averages spike, the power management system doesn't step up my processor speed from 1.6 to its maximum 2.13Ghz clock speed (not sure if this makes a huge difference with this problem). Any ideas?

  Read the article

• Can I flash a PCI-E device's Firmware in a VM if the VM has exclusive IOMMU access?

  - by RibaldEddie

  I have a PCI-E Dell Perc 6/i RAID card that I'd like to flash with the latest firmware. Apparently I need either a Redhat / Centos OS or Windows in order to flash the firmware, but I have a VMWare 5.0.1 ESX hypervisor installed on the box and a CentOS guest OS. My motherboard support IOMMU and I have successfully used VMWare's PCI Passthrough feature to give VMs exclusive access to a PCI-E device. Is it safe to flash the firmware of a PCI-E device if that device is passed through to a single VM using the passthrough feature of VMware? Or should I boot one of the supported OSes directly on the bare metal?

  Read the article

• many partitions on a single filegroup?¿ does it make sense?

  - by river0

  Hi, I'm designing a datawarehouse solution and I'm a newbie in disk configuration issues, let me explain you. Our storage is spread over 6 storage enlosures having each of them 5 raid-1 disk arrays, and having 2 LUNS defined per each disk array, which makes a total 48 LUNS (this is following Microsoft fast track recommendations for datawarehouse architectures). I would like to partition my data, on other projects I have worked before, we always followed a 1 partition - 1 filegroup rule. On the microsoft fast track recomendations it is advised to create a filegroup and then for that filegroup a data file per each lun... but I pretend to have a week level partitioning... if I apply that rule I think that I'll get too many files and a complex layout. I'm thinking of just creating just one filegroup (with the 48 lun data files), but still create the partitions since I want to keep soem of the benefits of partitions like partition switching... Is this scenario not recommended? What would you suggest?

  Read the article

• KVM slow guest i/o

  - by Akarot

  Host: Debian 6.0 (squeeze) with qemu-kvm and libvirt from squeeze-backports ii qemu-kvm 1.0+dfsg-8~bpo60+1 ii libvirt-bin 0.9.8-2~bpo60+2 Has 3TB sata drives with software raid and lvm. It has a sequential write speed of ~140MB/s measured with dd bs=1M count=512 if=/dev/zero of=test conv=fdatasync Elevator set to cfq Guest Debian 6.0 (squeeze) Uses LVM as storage. Drivers are virtio and cache='none' Sequential write speed is considerably slower with only 25-50MB/s Elevator set to noop I'm kind of running out of ideas for further tweaks but I'm sure that I/O speed should be much faster because many people are reporting almost native performance with lvm.

  Read the article

• Must partprobe before using drive?

  - by Jeff Welling

  This is a followup question to Cannot mount /dev/sdc1 on Debian 5.0, special device /dev/sdc1 doesn't exist Basically, I have 6 SATA hard drives in a machine and I'm trying to create a RAID6 array with them. When I try to run the mdadm command to create (with the verbose option) a raid array, I see messages like "mdadm: super1.x cannot open /dev/sdf1: No such device or address" which are resolved by doing partprobe /dev/sdf and then re-running the mdadm command. The problem is that I have to run partprobe after each reboot, and from experience I don't think this is normal behaviour -- on no other linux machine do I have to partprobe the device before I can use it. Something must be going wrong, but how do I troubleshoot this to find out what? Could this be caused by a hardware problem? Edit: Additional note - before I seemed to only have this problem with one drive, but now I'm having it with 3 drives.

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• NetApp and SQL Server?

  - by Edinor

  Do you have any good or bad experiences to share running SQL Server OLTP Systems on NetApp appliances? I have been working with a small, relatively low-volume cluster with a lower-end NetApp device, and I have found the environment to be generally unstable, at least compared to my experiences with other SANs, iSCSI arrays, and DAS setups. I struggle to believe that RAID DP and WAFL are more than fairy-dust technologies. A solution has been proposed to me that I just need a bigger, better NetApp, with PAM cards and other cool technology I've not heard of, and I feel like I would be better off spending a quarter of that on good direct-attached drives and a beefy server. At the same time, I feel that an Enterprise-class SAN should be something I can count on to be consistently a more stable, better performer than the less expensive solution I might propose. Are you a SQL Server DBA in an OLTP environment and love your NetApp? If you don't like them, why not?

  Read the article

• HP DL380 RAID5 Mistake

  - by Eddy

  I had drives fail in both logical drives on a server. When I replaced failed 146GB drive in Raid 5 array with four (4) 146GB drives. On reboot the Smart Array controller asked if I wanted to accept data loss. Guess mistake to choose yes. Can't seem to find a way to get system to repair RAID5 but it seems to want to just create a new partition. Is there anyway I can go back and get the system to restore the data from other three drives now that I said accept data loss?

  Read the article

• Best Solution for Load Balancing NFS File Access?

  - by DairyKnight

  I'm trying to find an optimum solution for accessing the NFS file share in my company. We have a central file server in North America and has 30GB~50GB of updated data everyday. And it's very slow for our Europe and Asia branches to access directly. Therefore, I'm trying to setup two replicate servers in those continents. I'm currently using rsync, but wonder if there exists a better solution acts more like a distributed RAID, which allows the user to transparently access the file whether synced or not. And user request will be dispatched to remote server if the file is not yet synced. I'm now looking into DRBD, but it seems not to have the functionality of auto-dispatching requests. Does anyone know if there's a better solution?

  Read the article

• SQL Server 2008 Hardware Recommendation;

  - by Jay

  Hi,I work for a large fortune 500 company. We have several SQL 2005 Servers running on DELL Poweredge 2950 with 8 GB RAM and 4 CPU's. Storage is DMX RAID 10. We are in the process of migrating to sql 2008. We are planning on consolidating multiple sql 2005 into single SQL 2008 Server.If anyone can suggest hardware I would appreciate. We have looked at DELL R710, I was wondering if there are other servers that are good for running SQL 2008. Thanks

  Read the article

• Tape Storage - How do I setup a tape backup system for use with my NAS

  - by John Himmelman

  I currently have a QNAP NAS with a raid 5 config (~600gb storage) but don't have a reliable backup solution. I've heard great things about tape backup systems (reliability, durability, etc..). How can I go about setting up a tape backup system? The tape drives seem very expensive (1k+ for a decent one, more than the price of my NAS). What are the important specs to compare and features to take into consideration? Edit: Does anyone have links to some good resources? There is a ton of articles, guides, and sites on this subject, not sure where to start.

  Read the article

• Can't get Intel drivers for ASUS P6T Deluxe

  - by Alex K

  Hi everybody, A few days back my Win7 Ultimate started bugging me to install the RAID drivers for my ASUS P6T Delux. Fine, I'm all for having up to date drivers even for stuff I don't use. The problem is that the drivers I download from both ASUS support site here and the ones I get directly from Intel (can't post the second link, since I have less than 10 rep, but it's the first hit for "Intel(R) Matrix Storage Manager Driver" on google) say that my system does not meet the minimum system requirements. Impossible, I would think, what with it having the X58 chipset and the Windows version is supported one. Has anyone encountered something like this before? Any clues on how to solve this would be much appreciated. Thanks!

  Read the article

• 19" Rackmountable fast storage arrays

  - by Eruditass

  I'm in need of some fast (15+ GB/s write) and somewhat large (50 TB+) storage subsystem with a standard storage interface. I'd prefer something other than Fibre Channel, which admittedly appears to be the most standard interface. RAID 5 is sufficient. What are the cheapest / smallest products from vendors to look at for building this subsystem? I've looked at DDN and TMS so far. Small: Under 20U Cheap: Under a million Edit: I'd really like to cut back costs as much as possible at the expense of capacity. How cheap can these bandwidth requirements be met?

  Read the article

• Intel 520 SSD drives not working with lsi controller on VMware esxi 5

  - by Michael

  We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Slow NFS transfer performance of small files

  - by Arie K

  I'm using Openfiler 2.3 on an HP ML370 G5, Smart Array P400, SAS disks combined using RAID 1+0. I set up an NFS share from ext3 partition using Openfiler's web based configuration, and I succeeded to mount the share from another host. Both host are connected using dedicated gigabit link. Simple benchmark using dd: $ dd if=/dev/zero of=outfile bs=1000 count=2000000 2000000+0 records in 2000000+0 records out 2000000000 bytes (2.0 GB) copied, 34.4737 s, 58.0 MB/s I see it can achieve moderate transfer speed (58.0 MB/s). But if I copy a directory containing many small files (.php and .jpg, around 1-4 kB per file) of total size ~300 MB, the cp process ends in about 10 minutes. Is NFS not suitable for small file transfer like above case? Or is there some parameters that must be adjusted?

  Read the article

• Barracuda spam filter alternative - virtualization/appliance friendly?

  - by ewwhite

  I've sold and deployed Barracuda spam and web filters for years. I've always thought that the functionality was good (Barracuda Central, easy interface, effective filtering), but the hardware on the entry to midrange units is a weak point. They have single power supplies, no RAID and limited monitoring support. Personally, I think Barracuda would make a killing selling their software as a VMWare appliance, but I'm looking for something similar that I can deploy as a consultant, but will be easy for customers to manage. It should have support for server-grade hardware or the ability to be deployed as a virtual machine. Is there anything out there that's close?

  Read the article

• SAN typical MTBF

  - by Adrian K

  We're using a SAN on a project at work, and there's a bit of debate around the fact that's technically it's a Single Point of Failure. No one seems to have any hard data. The SAN in question is a single physical box, but with internal redundant components (sorry - not sure3 what level of RAID it has, but I can find out). What's the tyopical MTBF for a SAN? The PM has it down on the projects risk register as "Quite Common' - I've never heard of a SAN going down, but I don't jhave any stats to show how likely it really is. Does anyone have any helpful info?

  Read the article

• Content server backups

  - by Dan Sosedoff

  What is the best way to backup data on content servers? For example, I have 15 servers that just have content, no applications running on it. Each server has a 250 GB hard drive. So, it's a pretty big amount of data. All the data have external access (via HTTP). So, the question is: what methodology is best in my case? The most useful method I know is cross-backup: when each server contains its own data and backup of one other server. But, there is significant reduction in total capacity. RAID?

  Read the article

• How do I use an internal SSD as a scratch disk for FCP X?

  - by andrewb

  I'm contemplating setting up my MacBook Air as a video editing machine. If I do this, I'll upgrade to a 256 GB SSD, and I should be able to keep around 100 GB or more free for video editing. The video files would of course be stored externally, but save purchasing some expensive Thunderbolt RAID device (which I suppose is gradually becoming more of an option), it will be slow for read/writes. How can I have a set up where I take advantage of my SSD's speed for a scratch disk/cache for FCP X, but still have the TB(s) of storage of externals? I don't want to have to be moving files constantly back and forth, this is about saving time not wasting it.

  Read the article

• AutoCAD 11 and network file shares

  - by gravyface

  Small network of perhaps half a dozen engineers, currently working on local copies of AutoCAD project files, which are then copied back up to file server (2008 Standard, 1-2 year old Dell server hardware, RAID 5 SAS disks (10k? not positive)) at end of day. To me, this sounds horribly inefficient and error-prone, however, I've been told that "AutoCAD and network files = bad idea" and this is gospel. The network is currently 10/100 (perhaps this is the reason for the "gospel") but all the workstations are within 2 years old and have GbE NICs so an upgrade of the core switch is long overdue. However, I know certain applications don't like network access, at all, and any sign of latency or disruption brings the whole thing crashing down. Anyone care to chime in?

  Read the article

• NAS + XBMC combination

  - by Hendrik

  I currently own a WD Sharespace and I am not too happy about it. It will freeze constantly and its rather slow. I've been thinking of replacing it. I also own a WD HD Live, and it works like it is supposed to, but recently I've seen XBMC in action and I was quite impressed. I've been wondering lately about the possibility of replacing both products with one new device: a fast reliable nas which I can install XBMC on and is capable of rendering video and has an HDMI out. Do any such devices exist for sale or is the only way to build one from scratch? I've seen HTPC's for sale but I've never seen any of them with a raid setup. I've also read about building your own NAS with freeNAS but those setups dont allow you to run XBMC. Does anyone have experience with this?

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

  Read the article

• Change programfiles variable on windows

  - by Fire-Dragon-DoL

  I have built a computer for a user that asked me for "speed": an SSD was the obvious solution because what he means by speed is "fast boot time". This solved the problem, however the user is not smart enough to remember that he must install programs on D rather than C (c is the ssd, D is an raid 1 hdd). The only solution that comes in my mind is changing programfiles variable such that will point to D rather than C by default. Otherwise, other solutions are ok but I really can't find anything else at the moment. Does anyone have recommendations for how to accomplish changing the default installation directory in Windows?

  Read the article

• How do i use storage spaces?

  - by Lucas

  I am planning on building a new windows 2012 server for a client and I have no experience in doing so. I have built many linux servers for them and setting up software raid during the install is a trivial matter. I have been unable to confirm that the windows 2012 install process has an analogous process for setting up Storage Spaces during the install. Can Storage Spaces be used as an installation target (configured during setup?) Is it capable of mirror+stripe (RAID10)? We have not ordered the hardware yet, so I'm looking for clarification.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >