Search Results

Search found 33291 results on 1332 pages for 'development environment'.

Page 440/1332 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

• What are the cons of using DrawableGameComponent for every instance of a game object?

  - by Kensai

  I've read in many places that DrawableGameComponents should be saved for things like "levels" or some kind of managers instead of using them, for example, for characters or tiles (Like this guy says here). But I don't understand why this is so. I read this post and it made a lot of sense to me, but these are the minority. I usually wouldn't pay too much attention to things like these, but in this case I would like to know why the apparent majority believes this is not the way to go. Maybe I'm missing something.

  Read the article

• Pitch camera around model

  - by ChocoMan

  Currently, my camera rotates with my model's Y-Axis (yaw) perfectly. What I'm having trouble with is rotating the X-Axis (pitch) along with it. I've tried the same method for cameraYaw() in the form of cameraPitch(), while adjusting the axis to Vector.Right, but the camera wouldn't pitch at all in accordance to the Y-Axes of the controller. Is there a way similar to this to get the same effect for pitching the camera around the model? // Rotates model on its own Y-axis public void modelRotMovement(GamePadState pController) { Yaw = pController.ThumbSticks.Right.X * MathHelper.ToRadians(speedAngleMAX); AddRotation = Quaternion.CreateFromYawPitchRoll(Yaw, 0, 0); ModelLoad.MRotation *= AddRotation; MOrientation = Matrix.CreateFromQuaternion(ModelLoad.MRotation); } // Orbit (yaw) Camera around model public void cameraYaw(Vector3 axis, float yaw, float pitch) { Pitch = pController.ThumbSticks.Right.Y * MathHelper.ToRadians(speedAngleMAX); ModelLoad.CameraPos = Vector3.Transform(ModelLoad.CameraPos - ModelLoad.camTarget, Matrix.CreateFromAxisAngle(axis, yaw)) + ModelLoad.camTarget; } public void updateCamera() { cameraYaw(Vector3.Up, Yaw); }

  Read the article

• Raycasting mouse coordinates to rotated object?

  - by SPL

  I am trying to cast a ray from my mouse to a plane at a specified position with a known width and length and height. I know that you can use the NDC (Normalized Device Coordinates) to cast ray but I don't know how can I detect if the ray actually hit the plane and when it did. The plane is translated -100 on the Y and rotated 60 on the X then translated again -100. Can anyone please give me a good tutorial on this? For a complete noob! I am almost new to matrix and vector transformations.

  Read the article

• Determine percentage of screen covered by an object without using frustum culling

  - by Meltac

  On the CPU-side of an 3D first-person / ego perspective game I need to check whether what the players currently sees on screen is the inside of a box object defined by world space coordinates (the player might be outside of that box but on screen sees only/mostly the inside of the box, or vice-versa, looks from within the box to the outside). The "casual" way of performing such a check would incorporate frustum culling but such an approach would be hard to achieve with my given set of engine parameters which I'd like to avoid if there is a simpler way. What I actually have at the point where I would like to do the check (high-level script on CPU, not GPU side): Camera world position Camera direction Camera FOV Two Box corner world coordinates (left-bottom-front, right-top-back) What I do not have right away: View frustrum definition (near/far plane or say 6 planes defining frustum) Any specific pixel information (uv, view space position, depth or the like) What I would like to calculate: Percentage of screen "covered" by box. Any hints on how to perform such calculation?

  Read the article

• Collision Detection on floor tiles Isometric game

  - by Anivrom

  I am having a very hard to time figuring out a bug in my code. It should have taken me 20 minutes but instead I've been working on it for over 12 hours. I am writing a isometric tile based game where the characters can walk freely amongst the tiles, but not be able to cross over to certain tiles that have a collides flag. Sounds easy enough, just check ahead of where the player is going to move using a Screen Coordinates to Tile method and check the tiles array using our returned xy indexes to see if its collidable or not. if its not, then don't move the character. The problem I'm having is my Screen to Tile method isn't spitting out the proper X,Y tile indexes. This method works flawlessly for selecting tiles with the mouse. NOTE: My X tiles go from left to right, and my Y tiles go from up to down. Reversed from some examples on the net. Here's the relevant code: public Vector2 ScreentoTile(Vector2 screenPoint) { //Vector2 is just a object with x and y float properties //camOffsetX,Y are my camera values that I use to shift everything but the //current camera target when the target moves //tilescale = 128, screenheight = 480, the -46 offset is to center // vertically + 16 px for some extra gfx in my tile png Vector2 tileIndex = new Vector2(-1,-1); screenPoint.x -= camOffsetX; screenPoint.y = screenHeight - screenPoint.y - camOffsetY - 46; tileIndex.x = (screenPoint.x / tileScale) + (screenPoint.y / (tileScale / 2)); tileIndex.y = (screenPoint.x / tileScale) - (screenPoint.y / (tileScale / 2)); return tileIndex; } The method that calls this code is: private void checkTileTouched () { if (Gdx.input.justTouched()) { if (last.x >= 0 && last.x < levelWidth && last.y >= 0 && last.y < levelHeight) { if (lastSelectedTile != null) lastSelectedTile.setColor(1, 1, 1, 1); Sprite sprite = levelTiles[(int) last.x][(int) last.y].sprite; sprite.setColor(0, 0.3f, 0, 1); lastSelectedTile = sprite; } } if (touchDown) { float moveX=0,moveY=0; Vector2 pos = new Vector2(); if (player.direction == direction_left) { moveX = -(player.moveSpeed); moveY = -(player.moveSpeed / 2); Gdx.app.log("Movement", String.valueOf("left")); } else if (player.direction == direction_upleft) { moveX = -(player.moveSpeed); moveY = 0; Gdx.app.log("Movement", String.valueOf("upleft")); } else if (player.direction == direction_up) { moveX = -(player.moveSpeed); moveY = player.moveSpeed / 2; Gdx.app.log("Movement", String.valueOf("up")); } else if (player.direction == direction_upright) { moveX = 0; moveY = player.moveSpeed; Gdx.app.log("Movement", String.valueOf("upright")); } else if (player.direction == direction_right) { moveX = player.moveSpeed; moveY = player.moveSpeed / 2; Gdx.app.log("Movement", String.valueOf("right")); } else if (player.direction == direction_downright) { moveX = player.moveSpeed; moveY = 0; Gdx.app.log("Movement", String.valueOf("downright")); } else if (player.direction == direction_down) { moveX = player.moveSpeed; moveY = -(player.moveSpeed / 2); Gdx.app.log("Movement", String.valueOf("down")); } else if (player.direction == direction_downleft) { moveX = 0; moveY = -(player.moveSpeed); Gdx.app.log("Movement", String.valueOf("downleft")); } //Player.moveSpeed is 1 //tileObjects.x is drawn in the center of the screen (400px,240px) // the sprite width is 64, height is 128 testX = moveX * 10; testY = moveY * 10; testX += tileObjects.get(player.zIndex).x + tileObjects.get(player.zIndex).sprite.getWidth() / 2; testY += tileObjects.get(player.zIndex).y + tileObjects.get(player.zIndex).sprite.getHeight() / 2; moveX += tileObjects.get(player.zIndex).x + tileObjects.get(player.zIndex).sprite.getWidth() / 2; moveY += tileObjects.get(player.zIndex).y + tileObjects.get(player.zIndex).sprite.getHeight() / 2; pos = ScreentoTile(new Vector2(moveX,moveY)); Vector2 pos2 = ScreentoTile(new Vector2(testX,testY)); if (!levelTiles[(int) pos2.x][(int) pos2.y].collides) { Vector2 newPlayerPos = ScreentoTile(new Vector2(moveX,moveY)); CenterOnCoord(moveX,moveY); player.tileX = (int)newPlayerPos.x; player.tileY = (int)newPlayerPos.y; } } } When the player is moving to the left (downleft-ish from the viewers point of view), my Pos2 X values decrease as expected but pos2 isnt checking ahead on the x tiles, it is checking ahead on the Y tiles(as if we were moving DOWN, not left), and vice versa, if the player moves down, it will check ahead on the X values (as if we are moving LEFT, instead of DOWN). instead of the Y values. I understand this is probably the most confusing and horribly written post ever, but I'm confused myself so I'm having a hard time explaining it to others lol. if you need more information please ask!! I'm so frustrated after over 12 hours of working on it I'm about to give up.

  Read the article

• Tool for creating Spritesheet? and Tips

  - by Spooks

  I am looking for a tool that I can use to create sprite sheet easily. Right now I am using Illustrator, but I can never get the center of the character in the exact position, so it looks like it is moving around(even though its always in one place), while being loop through the sprite sheet. Is there any better tools that I can be using? Also what kind of tips would you give for working with a sprite sheet? Should I create each part of the character in individual layers (left arm, right arm, body, etc.) or everything at once? any other tips would also be helpful! thank you

  Read the article

• Velocity control of the player, why doesn't this work?

  - by Dominic Grenier

  I have the following code inside a while True loop: if abs(playerx) < MAXSPEED: if moveLeft: playerx -= 1 if moveRight: playerx += 1 if abs(playery) < MAXSPEED: if moveDown: playery += 1 if moveUp: playery -= 1 if moveLeft == False and abs(playerx) > 0: playerx += 1 if moveRight == False and abs(playerx) > 0: playerx -= 1 if moveUp == False and abs(playery) > 0: playery += 1 if moveDown == False and abs(playery) > 0: playery -= 1 player.x += playerx player.y += playery if player.left < 0 or player.right > 1000: player.x -= playerx if player.top < 0 or player.bottom > 600: player.y -= playery The intended result is that while an arrow key is pressed, playerx or playery increments by one at every iteration until it reaches MAXSPEED and stays at MAXSPEED. And that when the player stops pressing that arrow key, his speed decreases until it reaches 0. To me, this code explicitly says that... But what actually happens is that playerx or playery keeps incrementing regardless of MAXSPEED and continues moving even after the player stops pressing the arrow key. I keep rereading but I'm completely baffled by this weird behavior. Any insights? Thanks.

  Read the article

• Can't use the hardware scissor any more, should I use the stencil buffer or manually clip sprites?

  - by Alex Ames

  I wrote a simple UI system for my game. There is a clip flag on my widgets that you can use to tell a widget to clip any children that try to draw outside their parent's box (for scrollboxes for example). The clip flag uses glScissor, which is fed an axis aligned rectangle. I just added arbitrary rotation and transformations to my widgets, so I can rotate or scale them however I want. Unfortunately, this breaks the scissor that I was using as now my clip rectangle might not be axis aligned. There are two ways I can think of to fix this: either by using the stencil buffer to define the drawable area, or by having a wrapper function around my sprite drawing function that will adjust the vertices and texture coords of the sprites being drawn based on the clipper on the top of a clipper stack. Of course, there may also be other options I can't think of (something fancy with shaders possibly?). I'm not sure which way to go at the moment. Changing the implementation of my scissor functions to use the stencil buffer probably requires the smallest change, but I'm not sure how much overhead that has compared to the coordinate adjusting or if the performance difference is even worth considering.

  Read the article

• Making game constants/tables available to game logic classes/routines in a modular manner

  - by Extrakun

  Suppose I have a game where there are several predefined constants and charts (a XP chart, cost of goods and so on). Those could be defined at runtime, or load from files at start-up. The question is how should those logic routines access the constants and charts? For example, I could try using global variables, but that cause all classes relying on the variables to be tightly coupled with them.

  Read the article

• Game window systems and internal frames

  - by 2080

  I don't know if this is a valid question, but: What kind of window manager do games use which have internal frames (Frames inside frames)? Does this differ between the programming languages (Are e.g. in Java the AWT/Swing libraries used to manage these and other graphical elements, such as buttons,or is this to restrictive (speed, graphical possibilities?)) A special example would be EVE Online, where the client can use the ingame windows like on a normal desktop.

  Read the article

• Quaternion Camera Orbiting around a Sphere

  - by jessejuicer

  Background: I'm trying to create a game where the camera is always rotating around a single sphere. I'm using the DirectX D3DX math functions in C++ on Windows. The Problem: I cannot get both the camera position and orientation both working properly at the same time. Either one works but not both together. Here's the code for my quaternion camera that revolves around a sphere, always looking at the centerpoint of the sphere, ... as far as I understand it (but which isn't working properly): (I'm only going to present rotation around the X axis here, to simplify this post) Whenever the UP key is pressed or held down, the camera should rotate around the X axis, while looking at the centerpoint of the sphere (which is at 0,0,0 in the world). So, I build a quaternion that represents a small angle of rotation around the x axis like this (where 'deltaAngle' is a small enough number for a slow rotation): D3DXVECTOR3 rotAxis; D3DXQUATERNION tempQuat; tempQuat.x = 0.0f; tempQuat.y = 0.0f; tempQuat.z = 0.0f; tempQuat.w = 1.0f; rotAxis.x = 1.0f; rotAxis.y = 0.0f; rotAxis.z = 0.0f; D3DXQuaternionRotationAxis(&tempQuat, &rotAxis, deltaAngle); ...and I accumulate the result into the camera's current orientation quat, like this: D3DXQuaternionMultiply(&cameraOrientationQuat, &cameraOrientationQuat, &tempQuat); ...which all works fine. Now I need to build a view matrix to pass to DirectX SetTransform function. So I build a rotation matrix from the camera orientation quat as follows: D3DXMATRIXA16 rotationMatrix; D3DXMatrixIdentity(&rotationMatrix); D3DXMatrixRotationQuaternion(&rotationMatrix, &cameraOrientationQuat); ...Now (as seen below) if I just transpose that rotationMatrix and plug it into the 3x3 section of the view matrix, then negate the camera's position and plug it into the translation section of the view matrix, the rotation magically works. Perfectly. (even when I add in rotations for all three axes). There's no gimbal lock, just a smooth rotation all around in any direction. BUT- this works even though I never change the camera's position. At all. Which sorta blows my mind. I even display the camera position and can watch it stay constant at it's starting point (0.0, 0.0, -4000.0). It never moves, but the rotation around the sphere is perfect. I don't understand that. For proper view rotation, the camera position should be revolving around the sphere. Here's the rest of building the view matrix (I'll talk about the commented code below). Note that the camera starts out at (0.0, 0.0, -4000.0) and m_camDistToTarget is 4000.0: /* D3DXVECTOR3 vec1; D3DXVECTOR4 vec2; vec1.x = 0.0f; vec1.y = 0.0f; vec1.z = -1.0f; D3DXVec3Transform(&vec2, &vec1, &rotationMatrix); g_cameraActor->pos.x = vec2.x * g_cameraActor->m_camDistToTarget; g_cameraActor->pos.y = vec2.y * g_cameraActor->m_camDistToTarget; g_cameraActor->pos.z = vec2.z * g_cameraActor->m_camDistToTarget; */ D3DXMatrixTranspose(&g_viewMatrix, &rotationMatrix); g_viewMatrix._41 = -g_cameraActor->pos.x; g_viewMatrix._42 = -g_cameraActor->pos.y; g_viewMatrix._43 = -g_cameraActor->pos.z; g_viewMatrix._44 = 1.0f; g_direct3DDevice9->SetTransform( D3DTS_VIEW, &g_viewMatrix ); ...(The world matrix is always an identity, and the perspective projection works fine). ...So, without the commented code being compiled, the rotation works fine. But to be proper, for obvious reasons, the camera position should be rotating around the sphere, which it currently is not. That's what the commented code is supposed to do. And when I add in that chunk of code to do that, and look at all the data as I hold the keys down (using UP, DOWN, LEFT, RIGHT to rotate different directions) all the values look correct! The camera position is rotating around the sphere just fine, and I can watch that happen visually too. The problem is that the camera orientation does not lookat the center of the sphere. It always looks straight forward down the z axis (toward positive z) as it revolves around the sphere. Yet the values of both the rotation matrix and the view matrix seem to be behaving correctly. (The view matrix orientation is the same as the rotation matrix, just transposed). For instance if I just hold down the key to spin around the x axis, I can watch the values of the three axes represented in the view matrix (x, y, and z axes)... view x-axis stays at (1.0, 0.0, 0.0), and view y-axis and z-axis both spin around the x axis just fine. All the numbers are changing as they should be... well, almost. As far as I can tell, the position of the view matrix is spinning around the sphere one direction (like clockwise), and the orientation (the axes in the view matrix) are spinning the opposite direction (like counter-clockwise). Which I guess explains why the orientation appears to stay straight ahead. I know the position is correct. It revolves properly. It's the orientation that's wrong. Can anyone see what am I doing wrong? Am I using these functions incorrectly? Or is my algorithm flawed? As usual I've been combing my code for simple mistakes for many hours. I'm willing to post the actual code, and a video of the behavior, but that will take much more effort. Thought I'd ask this way first.

  Read the article

• Quaternion dfference + time --> angular velocity (gyroscope in physics library)

  - by AndrewK

  I am using Bullet Physic library to program some function, where I have difference between orientation from gyroscope given in quaternion and orientation of my object, and time between each frame in milisecond. All I want is set the orientation from my gyroscope to orientation of my object in 3D space. But all I can do is set angular velocity to my object. I have orientation difference and time, and from that I calculate vector of angular velocity [Wx,Wy,Wz] from that formula: W(t) = 2 * dq(t)/dt * conj(q(t)) My code is: btQuaternion diffQuater = gyroQuater - boxQuater; btQuaternion conjBoxQuater = gyroQuater.inverse(); btQuaternion velQuater = ((diffQuater * 2.0f) / d_time) * conjBoxQuater; And everything works well, till I get: 1 rotating around Y axis, angle about 60 degrees, then I have these values in 2 critical frames: x: -0.013220 y: -0.038050 z: -0.021979 w: -0.074250 - diffQuater x: 0.120094 y: 0.818967 z: 0.156797 w: -0.538782 - gyroQuater x: 0.133313 y: 0.857016 z: 0.178776 w: -0.464531 - boxQuater x: 0.207781 y: 0.290452 z: 0.245594 - diffQuater -> euler angles x: 3.153619 y: -66.947929 z: 175.936615 - gyroQuater -> euler angles x: 4.290697 y: -57.553043 z: 173.320053 - boxQuater -> euler angles x: 0.138128 y: 2.823307 z: 1.025552 w: 0.131360 - velQuater d_time: 0.058000 x: 0.211020 y: 1.595124 z: 0.303650 w: -1.143846 - diffQuater x: 0.089518 y: 0.771939 z: 0.144527 w: -0.612543 - gyroQuater x: -0.121502 y: -0.823185 z: -0.159123 w: 0.531303 - boxQuater x: nan y: nan z: nan - diffQuater -> euler angles x: 2.985240 y: -76.304405 z: -170.555054 - gyroQuater -> euler angles x: 3.269681 y: -65.977966 z: 175.639420 - boxQuater -> euler angles x: -0.730262 y: -2.882153 z: -1.294721 w: 63.325996 - velQuater d_time: 0.063000 2 rotating around X axis, angle about 120 degrees, then I have these values in 2 critical frames: x: -0.013045 y: -0.004186 z: -0.005667 w: -0.022482 - diffQuater x: -0.848030 y: -0.187985 z: 0.114400 w: 0.482099 - gyroQuater x: -0.834985 y: -0.183799 z: 0.120067 w: 0.504580 - boxQuater x: 0.036336 y: 0.002312 z: 0.020859 - diffQuater -> euler angles x: -113.129463 y: 0.731925 z: 25.415056 - gyroQuater -> euler angles x: -110.232368 y: 0.860897 z: 25.350458 - boxQuater -> euler angles x: -0.865820 y: -0.456086 z: 0.034084 w: 0.013184 - velQuater d_time: 0.055000 x: -1.721662 y: -0.387898 z: 0.229844 w: 0.910235 - diffQuater x: -0.874310 y: -0.200132 z: 0.115142 w: 0.426933 - gyroQuater x: 0.847352 y: 0.187766 z: -0.114703 w: -0.483302 - boxQuater x: -144.402298 y: 4.891629 z: 71.309158 - diffQuater -> euler angles x: -119.515343 y: 1.745076 z: 26.646086 - gyroQuater -> euler angles x: -112.974533 y: 0.738675 z: 25.411509 - boxQuater -> euler angles x: 2.086195 y: 0.676526 z: -0.424351 w: 70.104248 - velQuater d_time: 0.057000 2 rotating around Z axis, angle about 120 degrees, then I have these values in 2 critical frames: x: -0.000736 y: 0.002812 z: -0.004692 w: -0.008181 - diffQuater x: -0.003829 y: 0.012045 z: -0.868035 w: 0.496343 - gyroQuater x: -0.003093 y: 0.009232 z: -0.863343 w: 0.504524 - boxQuater x: -0.000822 y: -0.003032 z: 0.004162 - diffQuater -> euler angles x: -1.415189 y: 0.304210 z: -120.481873 - gyroQuater -> euler angles x: -1.091881 y: 0.227784 z: -119.399445 - boxQuater -> euler angles x: 0.159042 y: 0.169228 z: -0.754599 w: 0.003900 - velQuater d_time: 0.025000 x: -0.007598 y: 0.024074 z: -1.749412 w: 0.968588 - diffQuater x: -0.003769 y: 0.012030 z: -0.881377 w: 0.472245 - gyroQuater x: 0.003829 y: -0.012045 z: 0.868035 w: -0.496343 - boxQuater x: -5.645197 y: 1.148993 z: -146.507187 - diffQuater -> euler angles x: -1.418294 y: 0.270319 z: -123.638245 - gyroQuater -> euler angles x: -1.415183 y: 0.304208 z: -120.481873 - boxQuater -> euler angles x: 0.017498 y: -0.013332 z: 2.040073 w: 148.120056 - velQuater d_time: 0.027000 The problem is the most visible in diffQuater - euler angles vector. Can someone tell me why it is like that? and how to solve that problem? All suggestions are welcome.

  Read the article

• Physics like asteroides

  - by user2933016

  I try to make a ship that has the physic properties like asteroides. I have this for now(All in Java): Ship.class public class Ship { public static final float sMaxHealth = 0.1F; public static final float sMaxMoveVelocity = 5.0F; public static final float sMaxAngleVelocity = 20.0F; public static final float sRadius = 1.0F; public static final float sMoveDeceleration = 10.0F; public static final float sMoveAcceleration = 2.0F; public static final float sAngleDeceleration = 15.0F; public static final float sAngleAcceleration = 20.0F; private float mHealth; private float mXVelocity; private float mYVelocity; private float mAngleVelocity; private float mX; private float mY; private float mAngle; } (I let the getter and setter away for now) Controller code // Player input if(Gdx.input.isKeyPressed(Keys.UP)) { mPlayer.setXVelocity(mPlayer.getXVelocity() + (float) Math.cos(mPlayer.getAngle()) * Ship.sMoveAcceleration); mPlayer.setYVelocity(mPlayer.getYVelocity() + (float) Math.sin(mPlayer.getAngle()) * Ship.sMoveAcceleration); } if(Gdx.input.isKeyPressed(Keys.LEFT)) { mPlayer.setAngleVelocity(mPlayer.getAngleVelocity() + Ship.sAngleAcceleration * pDeltaTime); } if(Gdx.input.isKeyPressed(Keys.RIGHT)) { mPlayer.setAngleVelocity(mPlayer.getAngleVelocity() - Ship.sAngleAcceleration * pDeltaTime); } // X velocity if(mPlayer.getXVelocity() < 0) { if(-mPlayer.getXVelocity() > Ship.sMaxMoveVelocity) { mPlayer.setXVelocity(-Ship.sMaxMoveVelocity); } mPlayer.setXVelocity(mPlayer.getXVelocity() + Ship.sMoveDeceleration * pDeltaTime); if(mPlayer.getXVelocity() > 0) { mPlayer.setXVelocity(0); } } else if(mPlayer.getXVelocity() > 0) { if(mPlayer.getXVelocity() > Ship.sMaxMoveVelocity) { mPlayer.setXVelocity(Ship.sMaxMoveVelocity); } mPlayer.setXVelocity(mPlayer.getXVelocity() - Ship.sMoveDeceleration * pDeltaTime); if(mPlayer.getXVelocity() < 0) { mPlayer.setXVelocity(0); } } // Y velocity if(mPlayer.getYVelocity() < 0) { if(-mPlayer.getYVelocity() > Ship.sMaxMoveVelocity) { mPlayer.setYVelocity(-Ship.sMaxMoveVelocity); } mPlayer.setYVelocity(mPlayer.getYVelocity() + Ship.sMoveDeceleration * pDeltaTime); if(mPlayer.getYVelocity() > 0) { mPlayer.setYVelocity(0); } } else if(mPlayer.getYVelocity() > 0) { if(mPlayer.getYVelocity() > Ship.sMaxMoveVelocity) { mPlayer.setYVelocity(Ship.sMaxMoveVelocity); } mPlayer.setYVelocity(mPlayer.getYVelocity() - Ship.sMoveDeceleration * pDeltaTime); if(mPlayer.getYVelocity() < 0) { mPlayer.setYVelocity(0); } } // Angle velocity if(mPlayer.getAngleVelocity() < 0) { if(-mPlayer.getAngleVelocity() > Ship.sMaxAngleVelocity) { mPlayer.setAngleVelocity(-Ship.sMaxAngleVelocity); } mPlayer.setAngleVelocity(mPlayer.getAngleVelocity() + Ship.sAngleDeceleration * pDeltaTime); if(mPlayer.getAngleVelocity() > 0) { mPlayer.setAngleVelocity(0); } } else if(mPlayer.getAngleVelocity() > 0) { if(mPlayer.getAngleVelocity() > Ship.sMaxAngleVelocity) { mPlayer.setAngleVelocity(Ship.sMaxAngleVelocity); } mPlayer.setAngleVelocity(mPlayer.getAngleVelocity() - Ship.sAngleDeceleration * pDeltaTime); if(mPlayer.getAngleVelocity() < 0) { mPlayer.setAngleVelocity(0); } } mPlayer.setX(mPlayer.getX() + mPlayer.getXVelocity() * pDeltaTime); mPlayer.setY(mPlayer.getY() + mPlayer.getYVelocity() * pDeltaTime); mPlayer.setAngle(mPlayer.getAngle() + mPlayer.getAngleVelocity() * pDeltaTime); Why the ship does not behave like in asteroides ? What do I wrong?

  Read the article

• Help with "Cannot find ContentTypeReader BB.HeightMapInfoReader, BB, Version=1.0.0.0, Culture=neutral." needed

  - by rFactor

  Hi, I have this irritating problem in XNA that I have spent my Saturday with: Cannot find ContentTypeReader BB.HeightMapInfoReader, BB, Version=1.0.0.0, Culture=neutral. It throws me that when I do (within the game assembly's Renderer.cs class): this.terrain = this.game.Content.Load<Model>("heightmap"); There is a heightmap.bmp and I don't think there's anything wrong with it, because I used it in a previous version which I switched to this new better system. So, I have a GeneratedGeometryPipeline assembly that has these classes: HeightMapInfoContent, HeightMapInfoWriter, TerrainProcessor. The GeneratedGeometryPipeline assembly does not reference any other assemblies under the solution. Then I have the game assembly that neither references any other solution assemblies and has these classes: HeightMapInfo, HeightMapInfoReader. All game assembly classes are under namespace BB and the GeneratedGeometryPipeline classes are under the namespace GeneratedGeometryPipeline. I do not understand why it does not find it. Here's some code from the GeneratedGeometryPipeline.HeightMapInfoWriter: /// <summary> /// A TypeWriter for HeightMapInfo, which tells the content pipeline how to save the /// data in HeightMapInfo. This class should match HeightMapInfoReader: whatever the /// writer writes, the reader should read. /// </summary> [ContentTypeWriter] public class HeightMapInfoWriter : ContentTypeWriter<HeightMapInfoContent> { protected override void Write(ContentWriter output, HeightMapInfoContent value) { output.Write(value.TerrainScale); output.Write(value.Height.GetLength(0)); output.Write(value.Height.GetLength(1)); foreach (float height in value.Height) { output.Write(height); } foreach (Vector3 normal in value.Normals) { output.Write(normal); } } /// <summary> /// Tells the content pipeline what CLR type the /// data will be loaded into at runtime. /// </summary> public override string GetRuntimeType(TargetPlatform targetPlatform) { return "BB.HeightMapInfo, BB, Version=1.0.0.0, Culture=neutral"; } /// <summary> /// Tells the content pipeline what worker type /// will be used to load the data. /// </summary> public override string GetRuntimeReader(TargetPlatform targetPlatform) { return "BB.HeightMapInfoReader, BB, Version=1.0.0.0, Culture=neutral"; } } Can someone help me out?

  Read the article

• How to implement a simple bullet trajectory

  - by AirieFenix

  I searched and searched and although it's a fair simple question, I don't find the proper answer but general ideas (which I already have). I have a top-down game and I want to implement a gun which shoots bullets that follow a simple path (no physics nor change of trajectory, just go from A to B thing). a: vector of the position of the gun/player. b: vector of the mouse position (cross-hair). w: the vector of the bullet's trajectory. So, w=b-a. And the position of the bullet = [x=x0+speed*time*normalized w.x , y=y0+speed*time * normalized w.y]. I have the constructor: public Shot(int shipX, int shipY, int mouseX, int mouseY) { //I get mouse with Gdx.input.getX()/getY() ... this.shotTime = TimeUtils.millis(); this.posX = shipX; this.posY = shipY; //I used aVector = aVector.nor() here before but for some reason didn't work float tmp = (float) (Math.pow(mouseX-shipX, 2) + Math.pow(mouseY-shipY, 2)); tmp = (float) Math.sqrt(Math.abs(tmp)); this.vecX = (mouseX-shipX)/tmp; this.vecY = (mouseY-shipY)/tmp; } And here I update the position and draw the shot: public void drawShot(SpriteBatch batch) { this.lifeTime = TimeUtils.millis() - this.shotTime; //position = positionBefore + v*t this.posX = this.posX + this.vecX*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); this.posY = this.posY + this.vecY*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); ... } Now, the behavior of the bullet seems very awkward, not going exactly where my mouse is (it's like the mouse is 30px off) and with a random speed. I know I probably need to open the old algebra book from college but I'd like somebody says if I'm in the right direction (or points me to it); if it's a calculation problem, a code problem or both. Also, is it possible that Gdx.input.getX() gives me non-precise position? Because when I draw the cross-hair it also draws off the cursor position. Sorry for the long post and sorry if it's a very basic question. Thanks!

  Read the article

• isometric drawing order with larger than single tile images - drawing order algorithm?

  - by Roger Smith

  I have an isometric map over which I place various images. Most images will fit over a single tile, but some images are slightly larger. For example, I have a bed of size 2x3 tiles. This creates a problem when drawing my objects to the screen as I get some tiles erroneously overlapping other tiles. The two solutions that I know of are either splitting the image into 1x1 tile segments or implementing my own draw order algorithm, for example by assigning each image a number. The image with number 1 is drawn first, then 2, 3 etc. Does anyone have advice on what I should do? It seems to me like splitting an isometric image is very non obvious. How do you decide which parts of the image are 'in' a particular tile? I can't afford to split up all of my images manually either. The draw order algorithm seems like a nicer choice but I am not sure if it's going to be easy to implement. I can't solve, in my head, how to deal with situations whereby you change the index of one image, which causes a knock on effect to many other images. If anyone has an resources/tutorials on this I would be most grateful.

  Read the article

• My first animation - Using SDL.NET C#

  - by Mark

  Hi all! I'm trying to animate a player object in my 2D grid when the user clicks somewhere in the screen. I got the following 4 variables: oX (Current player position X) oY (Current player position Y) dX (Destination X) dY (Destination Y) How can I make sure the player moves in a straight line to the new XY coordinates. The way I'm doing it now is really awfull and causes the player to first move along x axis, and finally in y axis. Can someone give me some guidance with the involved math cause I'm really not sure on how to accomplish this. Thank you for your time. Kind regards, Mark Update: It's working now but whats the right way to check if the current positions are equal to the target position? private static void MovePlayer(double x2, double y2, int duration) { double hX = x2 - m_PlayerPosition.X; double hY = y2 - m_PlayerPosition.Y; double Length = Math.Sqrt(Math.Pow(hX, 2) + Math.Pow(hY, 2)); hX = hX / Length; hY = hY / Length; while (m_PlayerPosition.X != Convert.ToInt32(x2) || m_PlayerPosition.Y != Convert.ToInt32(y2)) { m_PlayerPosition.X += Convert.ToInt32(hX * 1); m_PlayerPosition.Y += Convert.ToInt32(hY * 1); UpdatePlayerLocation(); } }

  Read the article

• Using Shader causes triangle to disappear

  - by invisal

  The following is my rendering code. Private Sub GameRender() GL.Clear(ClearBufferMask.ColorBufferBit + ClearBufferMask.DepthBufferBit) GL.ClearColor(Color.SkyBlue) GL.UseProgram(theProgram) GL.EnableClientState(ArrayCap.VertexArray) GL.EnableClientState(ArrayCap.ColorArray) GL.BindBuffer(BufferTarget.ArrayBuffer, vertexPositionID) GL.DrawArrays(BeginMode.Triangles, 0, 3) GL.DisableClientState(ArrayCap.ColorArray) GL.DisableClientState(ArrayCap.VertexArray) GlControl1.SwapBuffers() End Sub This is screenshot without GL.UseProgram(theProgram) This is screenshot with GL.UseProgram(theProgram) Here are my shader code that I picked from online tutorial. Vertex Shader #version 330 layout(location = 0) in vec4 position; void main() { gl_Position = position; } Fragment Shader #version 330 out vec4 outputColor; void main() { outputColor = vec4(1.0f, 1.0f, 1.0f, 1.0f); } These are my shader creation code. '' Initialize Shader Dim shaderList(1) As Integer shaderList(0) = CreateShader(ShaderType.VertexShader, strVertexShader) shaderList(1) = CreateShader(ShaderType.FragmentShader, strFragShader) theProgram = CreateProgram(shaderList) GL.DeleteShader(shaderList(0)) GL.DeleteShader(shaderList(1)) Here are my helper functions Private Function CreateShader(ByVal shaderType As ShaderType, ByVal code As String) Dim shader As Integer = GL.CreateShader(shaderType) GL.ShaderSource(shader, code) GL.CompileShader(shader) Dim status As Integer GL.GetShader(shader, ShaderParameter.CompileStatus, status) If status = False Then MsgBox(GL.GetShaderInfoLog(shader)) End If Return shader End Function Private Function CreateProgram(ByVal shaderList() As Integer) As Integer Dim program As Integer = GL.CreateProgram() For i As Integer = 0 To shaderList.Length - 1 GL.AttachShader(program, shaderList(i)) Next GL.LinkProgram(program) Dim status As Integer GL.GetProgram(program, ProgramParameter.LinkStatus, status) If status = False Then MsgBox(GL.GetProgramInfoLog(program)) End If For i As Integer = 0 To shaderList.Length - 1 GL.DetachShader(program, shaderList(i)) Next Return program End Function

  Read the article

• JMonkey Engine (JME) load Blender scene with textures?

  - by leigero

  I am having the hardest time trying to accomplish the simplest task. I have created a floor and 4 walls (not that complicated) in Blender. I added a basic material and cloud texture so they have something to look at other than gray. When I import them into JMonkey they show up as solid white objects with no shading or depth. White silhouettes. I thought this may be a lighting issue, but I have ambient light added to the scene. I can remove that light or adjust its intensity and it has no affect on the scene. I exported all Blender files into OgreXML format, then converted them to .j3o format in JMonkey. I renamed the textures to match their corresponding mesh and this didn't do anything. Does anybody know how to create a flat object and put it into JMonkey with a texture? This sounds simple and there is absolutely no information on this. This should be step 1!

  Read the article

• Why doesn't my GameMaker step event work?

  - by exceltior

  So I want to make some kind of floor that which the player when walks in gets his movement reduced but im having thousand of different issues implementing this since it doesnt appear to do anything ... So i have tried different way: 1 - I have tried Step Event which had the following script: if keyboard_check(ord('A')) { player.x = -5; } if keyboard_check(ord('D')) { player.x = -5; } if keyboard_check(ord('W')) { player.x = -5; } if keyboard_check(ord('S')) { player.x = -5; } 2 - I have tried a Collision Event with the same code 3- I have tried a Step event with collision detection on a script None of these options seem to work at all ... Can you help me?

  Read the article

• Why do the order of uniforms gets changed by the compiler?

  - by Aybe

  I have the following shader, everything works fine when setting the value of one of the matrices but I've discovered that getting a value back is incorrect for View and Projection, they are in reverse order. #version 430 precision highp float; layout (location = 0) uniform mat4 Model; layout (location = 1) uniform mat4 View; layout (location = 2) uniform mat4 Projection; layout (location = 0) in vec3 in_position; layout (location = 1) in vec4 in_color; out vec4 out_color; void main(void) { gl_Position = Projection * View * Model * vec4(in_position, 1.0); out_color = in_color; } When querying their location they are effectively reversed, I did a small test by renaming View to Piew which puts it before Projection if sorted alphabetically and the order is correct. Now if I do remove layout (location = ...) from the uniforms, the problem disappears !? I am starting to think that this is a driver bug as explained in the wiki. Do you know why the order of the uniforms is changed whenever the shader is compiled ? (using an AMD HD7850)

  Read the article

• Only draw visible objects to the camera in 2D

  - by Deukalion

  I have Map, each map has an array of Ground, each Ground consists of an array of VertexPositionTexture and a texture name reference so it renders a texture at these points (as a shape through triangulation). Now when I render my map I only want to get a list of all objects that are visible in the camera. (So I won't loop through more than I have to) Structs: public struct Map { public Ground[] Ground { get; set; } } public struct Ground { public int[] Indexes { get; set; } public VertexPositionNormalTexture[] Points { get; set; } public Vector3 TopLeft { get; set; } public Vector3 TopRight { get; set; } public Vector3 BottomLeft { get; set; } public Vector3 BottomRight { get; set; } } public struct RenderBoundaries<T> { public BoundingBox Box; public T Items; } when I load a map: foreach (Ground ground in CurrentMap.Ground) { Boundaries.Add(new RenderBoundaries<Ground>() { Box = BoundingBox.CreateFromPoints(new Vector3[] { ground.TopLeft, ground.TopRight, ground.BottomLeft, ground.BottomRight }), Items = ground }); } TopLeft, TopRight, BottomLeft, BottomRight are simply the locations of each corner that the shape make. A rectangle. When I try to loop through only the objects that are visible I do this in my Draw method: public int Draw(GraphicsDevice device, ICamera camera) { BoundingFrustum frustum = new BoundingFrustum(camera.View * camera.Projection); // Visible count int count = 0; EffectTexture.World = camera.World; EffectTexture.View = camera.View; EffectTexture.Projection = camera.Projection; foreach (EffectPass pass in EffectTexture.CurrentTechnique.Passes) { pass.Apply(); foreach (RenderBoundaries<Ground> render in Boundaries.Where(m => frustum.Contains(m.Box) != ContainmentType.Disjoint)) { // Draw ground count++; } } return count; } When I try adding just one ground, then moving the camera so the ground is out of frame it still returns 1 which means it still gets draw even though it's not within the camera's view. Am I doing something or wrong or can it be because of my Camera? Any ideas why it doesn't work?

  Read the article

• GoogleAppEngine : ClassNotFoundException : javax.jdo.metadata.ComponentMetadata

  - by James.Elsey

  I'm trying to deploy my application to a locally running GoogleAppEngine development server, but I'm getting the following stack trace when I start the server Apr 23, 2010 9:03:33 PM com.google.apphosting.utils.jetty.JettyLogger warn WARNING: Nested in org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'clientDao' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Cannot resolve reference to bean 'entityManagerFactory' while setting bean property 'entityManagerFactory'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'entityManagerFactory' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is java.lang.NoClassDefFoundError: javax/jdo/metadata/ComponentMetadata: java.lang.ClassNotFoundException: javax.jdo.metadata.ComponentMetadata at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at java.lang.ClassLoader.loadClass(ClassLoader.java:319) at com.google.appengine.tools.development.IsolatedAppClassLoader.loadClass(IsolatedAppClassLoader.java:151) at java.lang.ClassLoader.loadClass(ClassLoader.java:264) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:332) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:264) at javax.jdo.JDOHelper$18.run(JDOHelper.java:2009) at javax.jdo.JDOHelper$18.run(JDOHelper.java:2007) at java.security.AccessController.doPrivileged(Native Method) at javax.jdo.JDOHelper.forName(JDOHelper.java:2006) at javax.jdo.JDOHelper.invokeGetPersistenceManagerFactoryOnImplementation(JDOHelper.java:1155) at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:803) at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:698) at org.datanucleus.jpa.EntityManagerFactoryImpl.initialisePMF(EntityManagerFactoryImpl.java:482) at org.datanucleus.jpa.EntityManagerFactoryImpl.<init>(EntityManagerFactoryImpl.java:255) at org.datanucleus.store.appengine.jpa.DatastoreEntityManagerFactory.<init>(DatastoreEntityManagerFactory.java:68) at org.datanucleus.store.appengine.jpa.DatastorePersistenceProvider.createContainerEntityManagerFactory(DatastorePersistenceProvider.java:45) at org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean.createNativeEntityManagerFactory(LocalContainerEntityManagerFactoryBean.java:224) at org.springframework.orm.jpa.AbstractEntityManagerFactoryBean.afterPropertiesSet(AbstractEntityManagerFactoryBean.java:291) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1369) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1335) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409) at java.security.AccessController.doPrivileged(Native Method) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164) at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269) at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409) at java.security.AccessController.doPrivileged(Native Method) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:40) at com.google.appengine.tools.development.JettyContainerService.startContainer(JettyContainerService.java:181) at com.google.appengine.tools.development.AbstractContainerService.startup(AbstractContainerService.java:116) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerImpl.java:217) at com.google.appengine.tools.development.DevAppServerMain$StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser$ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServerMain.java:113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMain.java:89) The server is running at http://localhost:1234/ I'm a little confused over this, since I have the same application running locally on GlassFish/MySQL. All I have done is to swap in the relevant jar files, and change the persistence.xml. My applicationContext.xml looks as follows : <context:annotation-config/> <bean id="clientDao" class="com.jameselsey.salestracker.dao.jpa.JpaDaoClient"> <property name="entityManagerFactory" ref="entityManagerFactory"/> </bean> <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"/> <bean id="transactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory" /> </bean> <bean id="org.springframework.context.annotation.internalPersistenceAnnotationProcessor" class="com.jameselsey.salestracker.util.GaeFixInternalPersistenceAnnotationProcessor" /> <bean class="org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor"/> <tx:annotation-driven/> <bean id="clientService" class="com.jameselsey.salestracker.service.ClientService"/> </beans> My JPA DAO looks like this public class JpaDao extends JpaDaoSupport { protected <T> List<T> findAll(Class<T> clazz) { return getJpaTemplate().find("select c from " + clazz.getName() + " c"); } protected <T> T findOne(String jpql, Map params) { List<T> results = getJpaTemplate().findByNamedParams(jpql, params); if(results.isEmpty()) { return null; } if(results.size() > 1) { throw new IncorrectResultSizeDataAccessException(1, results.size()); } return results.get(0); } } And an example implemented method looks like this : @Override public Client getClientById(Integer clientId) { String jpql = "SELECT c " + "FROM com.jameselsey.salestracker.domain.Client c " + "WHERE c.id = " + clientId; return (Client) getJpaTemplate().find(jpql).get(0); } Like I say, this works ok on Glassfish/MySQL, is it possible this error could be a red herring to something else?

  Read the article

• "Accumulate" buffer results in XNA4?

  - by Utkarsh Sinha

  I'm trying to simulate a "heightmap" buffer in XNA4.0 but the results don't look correct. Here's what I'm hoping to achieve: http://www.youtube.com/watch?feature=player_detailpage&v=-Q6ISVaM5Ww#t=517s (8:38). From what I understand, here are the steps to reach there: Pass height buffer + current entity's heightmap Generate a stencil and update the height buffer Render sprite+stencil For now, I'm just trying to get the height buffer thing to work. So here's the problem. Inside the draw loop, I do the following: Create a new render target & set it Draw the heightmap with a sprite batch(no shaders) graphicsDevice.SetRenderTarget(null) Draw the rendertarget with SpriteBatch I expected to see all entities' heightmaps. But only the last entity's heightmap is visible. Any hints on what I'm doing wrong? Here's the code inside the draw loop: RenderTarget2D tempDepthStencil = new RenderTarget2D(graphicsDevice, graphicsDevice.Viewport.Width, graphicsDevice.Viewport.Height, false, graphicsDevice.DisplayMode.Format, DepthFormat.None); graphicsDevice.SetRenderTarget(tempDepthStencil); // Gather depth information SpriteBatch depthStencilSpriteBatch = new SpriteBatch(graphicsDevice); depthStencilSpriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.None, RasterizerState.CullCounterClockwise); depthStencilSpriteBatch.Draw(texHeightmap, pos, null, Color.White, 0, Vector2.Zero, 1, spriteEffects, 1); depthStencilSpriteBatch.End(); graphicsDevice.SetRenderTarget(null); SpriteBatch b1 = new SpriteBatch(graphicsDevice); b1.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, null, null, null, null); b1.Draw((Texture2D)tempDepthStencil, Vector2.Zero, null, Color.White, 0, Vector2.Zero, 1, spriteEffects, 1); b1.End();

  Read the article

• Low coupling and tight cohesion

  - by hidayat

  Of course it depends on the situation. But when a lower lever object or system communicate with an higher level system, should callbacks or events be preferred to keeping a pointer to higher level object? For example, we have a world class that has a member variable vector<monster> monsters. When the monster class is going to communicate with the world class, should I prefer using a callback function then or should I have a pointer to the world class inside the monster class?

  Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >